Hamlib/icom/ic821h.c

170 wiersze
5.0 KiB
C

/*
* Hamlib CI-V backend - description of IC-821H (VHF/UHF All-Mode Tranceiver)
* Contributed by Francois Retief <fgretief@sun.ac.za>
* Copyright (c) 2000,2001 by Stephane Fillod
*
* $Id: ic821h.c,v 1.1 2001-12-20 23:04:43 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <hamlib/rig.h>
#include "icom.h"
#define IC821H_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)
#define IC821H_VFO_ALL (RIG_VFO_A|RIG_VFO_C)
/* FIXME: What about MAIN/SUB mode? And satellite mode? */
#define IC821H_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_CPY|RIG_OP_MCL)
#define IC821H_SCAN_OPS (RIG_SCAN_MEM)
/* FIXME: Manual talks about 3 modes: Programmed scan, Memory scan and
* Mode select memory scan operation. How do i encode these?
*/
#define IC821H_STR_CAL { 0, { } }
/*
*/
static const struct icom_priv_caps ic821h_priv_caps = {
0x4c, /* default address */
1, /* 731 mode */
ic737_ts_sc_list,
IC821H_STR_CAL
};
const struct rig_caps ic821h_caps = {
rig_model: RIG_MODEL_IC821H,
model_name:"IC-821H",
mfg_name: "Icom",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_ALPHA,
rig_type: RIG_TYPE_TRANSCEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 300,
serial_rate_max: 19200,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,
has_get_func: RIG_FUNC_NONE,
has_set_func: RIG_FUNC_NONE,
has_get_level: RIG_LEVEL_NONE,
has_set_level: RIG_LEVEL_NONE,
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,
level_gran: {},
parm_gran: {},
ctcss_list: NULL,
dcs_list: NULL,
preamp: { RIG_DBLST_END, },
attenuator: { RIG_DBLST_END, }, /* Attanuator 15dB for each band. manual button */
max_rit: Hz(0), /* SSB,CW: +-1.0kHz FM: +-5.0kHz */
max_xit: Hz(0),
max_ifshift: Hz(0), /* 1.2kHz manual knob */
targetable_vfo: 0,
vfo_ops: IC821H_VFO_OPS,
scan_ops: IC821H_SCAN_OPS,
transceive: RIG_TRN_RIG,
bank_qty: 0,
chan_desc_sz: 0,
chan_list: {
/* FIXME: Each band has 80 channels (2*80) */
{ 1, 80, RIG_MTYPE_MEM, 0 },
{ 81, 82, RIG_MTYPE_EDGE, 0 },
RIG_CHAN_END,
},
rx_range_list1: {
{MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
{MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
RIG_FRNG_END, },
tx_range_list1: {
{MHz(144),MHz(146),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
{MHz(144),MHz(146),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
{MHz(430),MHz(440),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
{MHz(430),MHz(440),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
RIG_FRNG_END, },
rx_range_list2: {
{MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
{MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
RIG_FRNG_END, },
/*
* From manual: VHF UHF
* USA 144.0-148.0 MHz 430.0-450.0 MHz
* Europe 144.0-146.0 MHz 430.0-440.0 MHz
* Australia 144.0-148.0 MHz 430.0-450.0 MHz
* Sweden 144.0-146.0 MHz 432.0-438.0 MHz
*/
tx_range_list2: {
{MHz(144),MHz(148),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
{MHz(144),MHz(148),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
{MHz(430),MHz(450),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
{MHz(430),MHz(450),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
RIG_FRNG_END, },
tuning_steps: {
{RIG_MODE_SSB|RIG_MODE_CW,1},
{RIG_MODE_SSB|RIG_MODE_CW,10},
{RIG_MODE_SSB|RIG_MODE_CW,50},
{RIG_MODE_SSB|RIG_MODE_CW,100},
{RIG_MODE_FM,kHz(5)},
RIG_TS_END, },
/* mode/filter list, remember: order matters! */
filters: {
{RIG_MODE_CW|RIG_MODE_SSB, kHz(2.3)}, /* buildin */
{RIG_MODE_FM, kHz(15)}, /* buildin */
RIG_FLT_END, },
cfgparams: icom_cfg_params,
set_conf: icom_set_conf,
get_conf: icom_get_conf,
priv: (void*)&ic821h_priv_caps,
rig_init: icom_init,
rig_cleanup: icom_cleanup,
rig_open: NULL,
rig_close: NULL,
set_freq: icom_set_freq,
get_freq: icom_get_freq,
set_mode: icom_set_mode,
get_mode: icom_get_mode,
set_vfo: icom_set_vfo,
decode_event: icom_decode_event,
set_mem: icom_set_mem,
vfo_op: icom_vfo_op,
scan: icom_scan,
};