kopia lustrzana https://github.com/Hamlib/Hamlib
72 wiersze
3.1 KiB
Plaintext
72 wiersze
3.1 KiB
Plaintext
Jupiter (538)
|
|
(29 February 2012, AA6E)
|
|
The Jupiter needs current firmware, at least version 1,18. Earlier
|
|
firmware apparently had a different command protocol.
|
|
Most available commands are now implemented, with exception of NB,
|
|
NR, and AN.
|
|
|
|
Omni VI (563), VI Plus (564)
|
|
(26 March 2008, AA6E)
|
|
Note that the Omni uses an Icom-style command interface. The Omni
|
|
backend lives in the ../icom directory!
|
|
Omni (hardware) menu selections: The Omni's device address must be
|
|
set to '04'. The 563 and 564 provide 1200, 2400, 4800, 9600, and 19200
|
|
baud rates.
|
|
|
|
Notes on 563 (Omni VI) vs. 564 (Omni VI Plus)
|
|
Omni VI Plus (Hamlib model 351) backend can be used with the Omni
|
|
VI, subject to its hardware limitations.
|
|
|
|
Orion (TT 565, 565AT) and Orion II (TT 566, 566AT)
|
|
(14 February 2008)
|
|
Improved serial I/O transfer reliability, better error handling
|
|
|
|
V1 and V2 firmware are autorecognized in the tt565_open routine.
|
|
Version 2.xxx is now the default for Orion.
|
|
(5 November 2007)
|
|
|
|
The S-meter behavior has changed for Version 2.xxx of
|
|
firmware for Orion. Orion II presumably also has a different
|
|
calibration. We will recalibrate, but it is not clear
|
|
if Orion and Orion II will produce the same readings. :-(
|
|
Please send calibration info to me as indicated on the
|
|
Hamlib FAQ at http://hamlib.sourceforge.net/faq.html .
|
|
(23 April 2006)
|
|
|
|
These are all covered by the TT565 backend (model 1608).
|
|
This backend is functioning for basic HF work, although
|
|
memory, multi-VFO, and antenna selection, etc. are
|
|
left for the future.
|
|
All testing to date has been on a model 565AT, running
|
|
v 1.372 firmware.
|
|
All reports of success/failure (especially for the Orion 2)
|
|
are welcome -- Martin, aa6e@arrl.net
|
|
(26 Feb 2006)
|
|
|
|
tt550 TODO (Ken, N7IPB):
|
|
Support for multiple VFO's and Memories. The TT550 doesn't
|
|
really have VFO's or Memories since it's strictly a software
|
|
controlled radio, but they can easily be simulated in software.
|
|
I already support a split mode since the TX and RX control is
|
|
separate. Adding support for VFO-A, VFO-B and memory channels
|
|
will be done next.
|
|
|
|
The optional encoder with keypad is supported for changing frequency
|
|
only, along with F1 changing the stepsize. The other function keys
|
|
have no current assignments. I can add hard-coded Function keys as
|
|
I did with F1 but maybe a more generic solution can be determined.
|
|
|
|
In addition the keypad is not supported. Hamlib has no apparent way
|
|
to make use of the numeric keys. We probably need to add a callback
|
|
for key data.
|
|
|
|
IF-Shift: IF-Shift code is in place but I see no way in hamlib to make
|
|
use of it. The Icom dual pass-band tuning is supported, but not just
|
|
simple IF shift. Or maybe I just missed something.
|
|
|
|
TX Audio Monitor Volume - no hamlib support - RIG_LEVEL_TX_MON?
|
|
CW Sidetone Volume - no hamlib support - RIG_LEVEL_SIDETONE?
|
|
Transmit Audio Source and Volume select - no hamlib support - RIG_LEVEL_LINEIN?
|
|
CW Spot Level - no hamlib support - RIG_LEVEL_CW_SPOT?
|
|
Enable/Disable Amplifier keying loop - no hamlib support - RIG_FUNC_AMP?
|