Hamlib/rigs/icom/ic910.c

621 wiersze
20 KiB
C

/*
* Hamlib CI-V backend - description of IC-910 (VHF/UHF All-Mode Transceiver)
* Contributed by Francois Retief <fgretief@sun.ac.za>
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "misc.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "idx_builtin.h"
/*
* It seems some IC910 out there have weird firmware. Uncomment the following
* if your modes are wrong, and please report to hamlib-developer maillist
* with firmware number. That'd be interesting to have a word from Icom
* on this subject, and if firmware updates are possible.
*/
#ifdef HAVE_WEIRD_IC910_MODES
static int ic910_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
/* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */
if (mode == RIG_MODE_FM)
{
mode = RIG_MODE_RTTY;
}
return icom_set_mode(rig, vfo, mode, width);
}
static int ic910_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
/* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */
int retval = icom_get_mode(rig, vfo, mode, width);
if (*mode == RIG_MODE_RTTY)
{
*mode = RIG_MODE_FM;
}
return retval;
}
#endif /* HAVE_WEIRD_IC910_MODES */
/* this function compares 2 frequencies
* returns 1 if they are in the same band
* returns 0 if they are in different bands
*/
static int compareFrequencies(RIG *rig, freq_t freq1, freq_t freq2)
{
int freq1band = 0, freq2band = 0;
freq_range_t noband = RIG_FRNG_END;
while (rig->caps->rx_range_list1[freq1band].startf != noband.startf)
{
if (freq1 >= rig->caps->rx_range_list1[freq1band].startf &&
freq1 <= rig->caps->rx_range_list1[freq1band].endf)
{
break;
}
++freq1band;
//fprintf(stderr, "%i\n", freq1band);
}
while (rig->caps->rx_range_list1[freq2band].startf != noband.startf)
{
if (freq2 >= rig->caps->rx_range_list1[freq2band].startf &&
freq2 <= rig->caps->rx_range_list1[freq2band].endf)
{
break;
}
++freq2band;
}
if (freq2band == freq1band) { return 1; }
else { return 0; }
}
static int ic910_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
int retval;
freq_t otherfreq;
freq_t origfreq;
if ((retval = icom_get_freq(rig, RIG_VFO_CURR, &origfreq)) != RIG_OK) { return retval; }
if (compareFrequencies(rig, freq, origfreq))
{
/* correct band already */
if (RIG_VFO_A == vfo || RIG_VFO_B == vfo)
{
/* switch to desired VFO and read its frequency */
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
if ((retval = icom_get_freq(rig, vfo, &otherfreq)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
if (otherfreq != origfreq)
{
/* swap VFOs back as original was the other one */
icom_set_vfo(rig, RIG_VFO_A == vfo ? RIG_VFO_B : RIG_VFO_A);
}
}
else if (RIG_VFO_MAIN == vfo || RIG_VFO_SUB == vfo)
{
/* switch to the desired of MAIN and SUB and read its frequency */
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
if ((retval = icom_get_freq(rig, vfo, &otherfreq)) != RIG_OK) { return retval; }
if (otherfreq != origfreq)
{
/* started on a different so band exchange MAIN and SUB */
if ((retval = icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
/* swap MAIN/SUB back as original was the other one */
icom_set_vfo(rig, RIG_VFO_MAIN == vfo ? RIG_VFO_SUB : RIG_VFO_MAIN);
}
else
{
/* already correct one of MAIN and SUB */
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
}
}
else if (RIG_VFO_CURR == vfo)
{
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
}
else { retval = -RIG_EVFO; }
}
else
{
/* wrong band */
if (RIG_VFO_A == vfo || RIG_VFO_B == vfo)
{
/* try and set frequency, may fail if band is already on other of MAIN/SUB */
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
if (-RIG_ERJCTED == retval)
{
/* exchange MAIN & SUB */
if ((retval = icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG)) != RIG_OK) { return retval; }
if ((retval = icom_get_freq(rig, vfo, &origfreq)) != RIG_OK) { return retval; }
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
if ((retval = icom_get_freq(rig, vfo, &otherfreq)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
if (-RIG_ERJCTED == retval)
{
/* band not fitted so swap MAIN & SUB back and give up */
icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG);
return retval;
}
else if (retval != RIG_OK) { return retval; }
if (otherfreq != origfreq)
{
/* swap VFOs back as original was the other one */
icom_set_vfo(rig, RIG_VFO_A == vfo ? RIG_VFO_B : RIG_VFO_A);
}
/* we do not exchange bands back as this is taken to
mean set VFOA/B on MAIN to the specified frequency
as Hamlib does not recognize A on MAIN or B on SUB
etc. This is probably reasonable since we cannot Tx
on SUB */
return retval;
}
/* we changed band to the "third band" which always makes
VFO A current so just make the requested one the
specified frequency as well if it is VFO B. There is no
way of going to the "third band" without changing VFO
A */
if (RIG_VFO_B == vfo)
{
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
icom_set_vfo(rig, RIG_VFO_A);
}
}
else if (RIG_VFO_MAIN == vfo || RIG_VFO_SUB == vfo)
{
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
if ((retval = icom_get_freq(rig, vfo, &otherfreq)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
if (-RIG_ERJCTED == retval)
{
/* required band is on other of MAIN or SUB */
if ((retval = icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
}
else if (retval != RIG_OK) { return retval; }
if (otherfreq != origfreq)
{
/* started on other of MAIN & SUB so switch back */
icom_set_vfo(rig,
RIG_VFO_MAIN == vfo ?
RIG_VFO_SUB : RIG_VFO_MAIN);
}
}
else if (RIG_VFO_CURR == vfo)
{
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
if (-RIG_ERJCTED == retval)
{
/* exchange MAIN & SUB */
if ((retval = icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG)) != RIG_OK) { return retval; }
retval = icom_set_freq(rig, RIG_VFO_CURR, freq);
if (-RIG_ERJCTED == retval)
{
/* band not fitted so swap MAIN & SUB back and give up */
icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG);
return retval;
}
}
}
else { retval = -RIG_EVFO; }
}
return retval;
}
static int ic910_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
int retval;
freq_t origfreq;
vfo_t vfo_save;
struct icom_priv_data *priv = (struct icom_priv_data *) rig->state.priv;
/* start off by reading the current VFO frequency */
if ((retval = icom_get_freq(rig, RIG_VFO_CURR, &origfreq)) != RIG_OK) { return retval; }
vfo_save = rig->state.current_vfo;
rig_debug(RIG_DEBUG_TRACE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
if (RIG_VFO_A == vfo || RIG_VFO_B == vfo)
{
/* switch to desired VFO and read its frequency */
if (vfo_save != vfo)
{
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
}
if ((retval = icom_get_freq(rig, vfo, freq)) != RIG_OK) { return retval; }
if (vfo_save != vfo)
{
/* swap VFOs back as original was the other one */
icom_set_vfo(rig, vfo_save);
}
}
else if (RIG_VFO_MAIN == vfo || RIG_VFO_SUB == vfo)
{
/* switch to the desired of MAIN and SUB and read its frequency */
if ((retval = icom_set_vfo(rig, vfo)) != RIG_OK) { return retval; }
if ((retval = icom_get_freq(rig, vfo, freq)) != RIG_OK) { return retval; }
if (*freq != origfreq)
{
/* started on a different so switch back MAIN or SUB */
icom_set_vfo(rig, RIG_VFO_MAIN == vfo ? RIG_VFO_SUB : RIG_VFO_MAIN);
}
}
else if (RIG_VFO_CURR == vfo)
{
*freq = origfreq;
}
else if (RIG_VFO_TX == vfo)
{
vfo = priv->tx_vfo;
rig_debug(RIG_DEBUG_VERBOSE, "%s: VFO_TX asked for so vfo=%s\n", __func__,
rig_strvfo(vfo));
}
else if (RIG_VFO_RX == vfo)
{
vfo = priv->rx_vfo;
rig_debug(RIG_DEBUG_VERBOSE, "%s: VFO_RX asked for so vfo=%s\n", __func__,
rig_strvfo(vfo));
}
else { retval = -RIG_EVFO; }
return retval;
}
/*
* This function does the special bandwidth coding for IC-910
* (1 - normal, 2 - narrow)
*/
static int ic910_r2i_mode(RIG *rig, rmode_t mode, pbwidth_t width,
unsigned char *md, signed char *pd)
{
int err;
err = rig2icom_mode(rig, mode, width, md, pd);
if (*pd == PD_NARROW_3)
{
*pd = PD_NARROW_2;
}
return err;
}
#define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)
#define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)
#define IC910_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM|RIG_VFO_MAIN_A|RIG_VFO_MAIN_B|RIG_VFO_SUB_A|RIG_VFO_SUB_B)
#define IC910_SCAN_OPS (RIG_SCAN_MEM)
#define IC910_VFO_OPS (RIG_OP_FROM_VFO| \
RIG_OP_TO_VFO| \
RIG_OP_CPY| \
RIG_OP_MCL| \
RIG_OP_XCHG)
#define IC910_FUNC_ALL (RIG_FUNC_NB| \
RIG_FUNC_NR| \
RIG_FUNC_ANF| \
RIG_FUNC_TONE| \
RIG_FUNC_TSQL| \
RIG_FUNC_COMP| \
RIG_FUNC_VOX| \
RIG_FUNC_FBKIN| \
RIG_FUNC_AFC| \
RIG_FUNC_SATMODE| \
RIG_FUNC_SCOPE)
#define IC910_LEVEL_ALL (RIG_LEVEL_AF| \
RIG_LEVEL_RF| \
RIG_LEVEL_SQL| \
RIG_LEVEL_IF| \
RIG_LEVEL_NR| \
RIG_LEVEL_CWPITCH| \
RIG_LEVEL_RFPOWER| \
RIG_LEVEL_MICGAIN| \
RIG_LEVEL_KEYSPD| \
RIG_LEVEL_COMP| \
RIG_LEVEL_VOXGAIN| \
RIG_LEVEL_VOXDELAY| \
RIG_LEVEL_ANTIVOX| \
RIG_LEVEL_ATT| \
RIG_LEVEL_PREAMP)
#define IC910_STR_CAL UNKNOWN_IC_STR_CAL /* FIXME */
static const struct icom_priv_caps ic910_priv_caps =
{
0x60, /* default address */
0, /* 731 mode */
1, /* no XCHG to avoid display flicker */
ic910_ts_sc_list,
.r2i_mode = ic910_r2i_mode
};
int ic910_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
switch (func)
{
case RIG_FUNC_SCOPE:
return icom_set_raw(rig, C_CTL_MEM, S_MEM_BANDSCOPE, 0, NULL, 1,
status ? 1 : 0);
case RIG_FUNC_SATMODE:
return icom_set_raw(rig, C_CTL_MEM, S_MEM_SATMODE910, 0, NULL, 1,
status ? 1 : 0);
default:
return icom_set_func(rig, vfo, func, status);
}
}
int ic910_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
switch (func)
{
case RIG_FUNC_SCOPE:
return icom_get_raw(rig, C_CTL_MEM, S_MEM_BANDSCOPE, 0, NULL, status);
case RIG_FUNC_SATMODE:
return icom_get_raw(rig, C_CTL_MEM, S_MEM_SATMODE910, 0, NULL, status);
default:
return icom_get_func(rig, vfo, func, status);
}
}
int ic910_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_VOXDELAY:
return icom_set_level_raw(rig, level, C_CTL_MEM, S_MEM_VOXDELAY, 0, NULL, 1,
val);
default:
return icom_set_level(rig, vfo, level, val);
}
}
int ic910_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
switch (level)
{
case RIG_LEVEL_VOXDELAY:
return icom_get_level_raw(rig, level, C_CTL_MEM, S_MEM_VOXDELAY, 0, NULL, val);
default:
return icom_get_level(rig, vfo, level, val);
}
}
const struct rig_caps ic910_caps =
{
RIG_MODEL(RIG_MODEL_IC910),
.model_name = "IC-910",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC910_FUNC_ALL,
.has_set_func = IC910_FUNC_ALL | RIG_FUNC_RESUME,
.has_get_level = IC910_LEVEL_ALL | (RIG_LEVEL_RAWSTR),
.has_set_level = IC910_LEVEL_ALL,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 20, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0), /* SSB,CW: +-1.0kHz FM: +-5.0kHz */
.max_xit = Hz(0),
.max_ifshift = Hz(0), /* 1.2kHz manual knob */
// .targetable_vfo = RIG_TARGETABLE_FREQ,
.vfo_ops = IC910_VFO_OPS,
.scan_ops = IC910_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 105, RIG_MTYPE_EDGE },
{ 106, 106, RIG_MTYPE_CALL },
RIG_CHAN_END,
},
.rx_range_list1 = { /* USA */
{MHz(144), MHz(148), IC910_MODES, -1, -1, IC910_VFO_ALL},
{MHz(430), MHz(450), IC910_MODES, -1, -1, IC910_VFO_ALL},
{MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = {
{MHz(144), MHz(148), IC910_MODES, W(5), W(100), IC910_VFO_ALL},
{MHz(430), MHz(450), IC910_MODES, W(5), W(75), IC910_VFO_ALL},
{MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL},
RIG_FRNG_END,
},
.rx_range_list2 = { /* Europe */
{MHz(144), MHz(146), IC910_MODES, -1, -1, IC910_VFO_ALL},
{MHz(430), MHz(440), IC910_MODES, -1, -1, IC910_VFO_ALL},
{MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = {
{MHz(144), MHz(146), IC910_MODES, W(5), W(100), IC910_VFO_ALL},
{MHz(430), MHz(440), IC910_MODES, W(5), W(75), IC910_VFO_ALL},
{MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL},
RIG_FRNG_END,
},
.tuning_steps = {
{RIG_MODE_SSB | RIG_MODE_CW, 1},
{RIG_MODE_SSB | RIG_MODE_CW, 10},
{RIG_MODE_SSB | RIG_MODE_CW, 50},
{RIG_MODE_SSB | RIG_MODE_CW, 100},
{RIG_MODE_FM, kHz(0.1)},
{RIG_MODE_FM, kHz(5)},
{RIG_MODE_FM, kHz(6.25)},
{RIG_MODE_FM, kHz(10)},
{RIG_MODE_FM, kHz(12.5)},
{RIG_MODE_FM, kHz(20)},
{RIG_MODE_FM, kHz(25)},
{RIG_MODE_FM, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW | RIG_MODE_SSB, kHz(2.3)}, /* builtin */
{RIG_MODE_CW, Hz(600)}, /* with optional FL-132/Fl133 CW filters */
{RIG_MODE_FM, kHz(15)}, /* builtin */
{RIG_MODE_FM, kHz(6)}, /* builtin */
RIG_FLT_END,
},
.str_cal = IC910_STR_CAL,
.priv = &ic910_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.get_freq = ic910_get_freq,
.set_freq = ic910_set_freq,
#ifdef HAVE_WEIRD_IC910_MODES
.get_mode = ic910_get_mode,
.set_mode = ic910_set_mode,
#else
.get_mode = icom_get_mode,
.set_mode = icom_set_mode,
#endif
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.set_vfo = icom_set_vfo,
.get_ts = icom_get_ts,
.set_ts = icom_set_ts,
.get_func = ic910_get_func,
.set_func = ic910_set_func,
.get_level = ic910_get_level,
.set_level = ic910_set_level,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
.decode_event = icom_decode_event,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_split_vfo = icom_set_split_vfo,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_freq_mode = icom_set_split_freq_mode,
.get_split_freq_mode = icom_get_split_freq_mode,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_rptr_shift = icom_set_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
};