Hamlib/rigs/icom/id31.c

/*
 *  Hamlib CI-V backend - description of ID-31 and variations
 *  Copyright (c) 2015 by Stephane Fillod
 *  Copyright (c) 2019 by Malcolm Herring
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"

/*
 * Specs and protocol details comes from the chapter 11 of ID-31A_E_CD_ENG_1.pdf
 *
 * NB: while the port labeled "Data" is used for firmware upgrades,
 * you have to use the port labeled "SP" for rig control.
 *
 */

#define ID31_MODES (RIG_MODE_FM|RIG_MODE_DSTAR)
#define ID31_ALL_RX_MODES (RIG_MODE_AM|ID31_MODES)

#define ID31_VFO_ALL (RIG_VFO_MAIN)

#define ID31_SCAN_OPS RIG_SCAN_NONE

#define ID31_VFO_OPS  RIG_OP_NONE

#define ID31_FUNC_ALL ( \
                            RIG_FUNC_TONE| \
                            RIG_FUNC_TSQL| \
                            RIG_FUNC_CSQL| \
                            RIG_FUNC_DSQL| \
                            RIG_FUNC_VOX)

#define ID31_LEVEL_ALL    (RIG_LEVEL_AF| \
                            RIG_LEVEL_SQL| \
                            RIG_LEVEL_RAWSTR| \
                            RIG_LEVEL_RFPOWER| \
                            RIG_LEVEL_MICGAIN| \
                            RIG_LEVEL_VOXGAIN)

#define ID31_PARM_ALL RIG_PARM_NONE


/*
 * FIXME: real measurement
 */
#define ID31_STR_CAL  UNKNOWN_IC_STR_CAL



/*
 */
static struct icom_priv_caps id31_priv_caps =
{
    0xA0,   /* default address */
    0,      /* 731 mode */
    1,      /* no XCHG */
};

const struct rig_caps id31_caps =
{
    RIG_MODEL(RIG_MODEL_ID31),
    .model_name = "ID-31",
    .mfg_name =  "Icom",
    .version =  BACKEND_VER ".0",
    .copyright =  "LGPL",
    .status =  RIG_STATUS_UNTESTED,
    .rig_type =  RIG_TYPE_HANDHELD,
    .ptt_type =  RIG_PTT_RIG,
    .dcd_type =  RIG_DCD_RIG,
    .port_type =  RIG_PORT_SERIAL,
    .serial_rate_min =  4800,
    .serial_rate_max =  19200,
    .serial_data_bits =  8,
    .serial_stop_bits =  1,
    .serial_parity =  RIG_PARITY_NONE,
    .serial_handshake =  RIG_HANDSHAKE_NONE,
    .write_delay =  0,
    .post_write_delay =  0,
    .timeout =  1000,
    .retry =  3,
    .has_get_func =  ID31_FUNC_ALL,
    .has_set_func =  ID31_FUNC_ALL,
    .has_get_level =  ID31_LEVEL_ALL,
    .has_set_level =  RIG_LEVEL_SET(ID31_LEVEL_ALL),
    .has_get_parm =  ID31_PARM_ALL,
    .has_set_parm =  ID31_PARM_ALL,
    .level_gran = {
        // cppcheck-suppress *
        [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
    },
    .extparms = icom_ext_parms,
    .parm_gran =  {},
    .ctcss_list =  common_ctcss_list,
    .dcs_list =  full_dcs_list,
    .preamp =   { RIG_DBLST_END, },
    .attenuator =   { RIG_DBLST_END, },
    .max_rit =  Hz(0),
    .max_xit =  Hz(0),
    .max_ifshift =  Hz(0),
    .targetable_vfo =  0,
    .vfo_ops =  ID31_VFO_OPS,
    .scan_ops =  ID31_SCAN_OPS,
    .transceive =  RIG_TRN_RIG,
    .bank_qty =   0,
    .chan_desc_sz =  0,

    .chan_list =  {
        // There's no memory support through CI-V,
        // but there is a clone mode apart.
        RIG_CHAN_END,
    },

    .rx_range_list1 =   {
        {MHz(400), MHz(479), ID31_ALL_RX_MODES, -1, -1, ID31_VFO_ALL},
        RIG_FRNG_END,
    },
    .tx_range_list1 =  {
        {MHz(430), MHz(440), ID31_MODES, W(2.5), W(5), ID31_VFO_ALL},
        RIG_FRNG_END,
    },

    .rx_range_list2 =   {
        {MHz(400), MHz(479), ID31_ALL_RX_MODES, -1, -1, ID31_VFO_ALL},
        RIG_FRNG_END,
    },
    .tx_range_list2 =  {
        {MHz(440), MHz(450), ID31_MODES, W(2.5), W(5), ID31_VFO_ALL},
        RIG_FRNG_END,
    },

    .tuning_steps =     {
        // Rem: no support for changing tuning step
        RIG_TS_END,
    },
    /* mode/filter list, remember: order matters! */
    .filters =  {
        {RIG_MODE_FM, kHz(12)},
        {RIG_MODE_FM, kHz(6)},
        RIG_FLT_END,
    },
    .str_cal = ID31_STR_CAL,

    .cfgparams =  icom_cfg_params,
    .set_conf =  icom_set_conf,
    .get_conf =  icom_get_conf,

    .priv = (void *)& id31_priv_caps,
    .rig_init =   icom_init,
    .rig_cleanup =   icom_cleanup,
    .rig_open =  icom_rig_open,
    .rig_close =  icom_rig_open,

    .set_freq =  icom_set_freq,
    .get_freq =  icom_get_freq,
    .set_mode =  icom_set_mode,
    .get_mode =  icom_get_mode,

    .set_powerstat = icom_set_powerstat,
    .get_powerstat = icom_get_powerstat,
    .decode_event =  icom_decode_event,

    .set_func =  icom_set_func,
    .get_func =  icom_get_func,
    .set_level =  icom_set_level,
    .get_level =  icom_get_level,
    .set_parm =  icom_set_parm,
    .get_parm =  icom_get_parm,
    .set_ext_parm =  icom_set_ext_parm,
    .get_ext_parm =  icom_get_ext_parm,
    .set_ptt =  icom_set_ptt,
    .get_ptt =  icom_get_ptt,
    .get_dcd =  icom_get_dcd,

    .set_rptr_shift =  icom_set_rptr_shift,
    .get_rptr_shift =  icom_get_rptr_shift,
    .set_rptr_offs =  icom_set_rptr_offs,
    .get_rptr_offs =  icom_get_rptr_offs,
    .set_ctcss_tone =  icom_set_ctcss_tone,
    .get_ctcss_tone =  icom_get_ctcss_tone,
    .set_dcs_code =  icom_set_dcs_code,
    .get_dcs_code =  icom_get_dcs_code,
    .set_ctcss_sql =  icom_set_ctcss_sql,
    .get_ctcss_sql =  icom_get_ctcss_sql,
    .set_dcs_sql =  icom_set_dcs_sql,
    .get_dcs_sql =  icom_get_dcs_sql,
};