Hamlib/aor/ar5000.c

307 wiersze
7.7 KiB
C

/*
* Hamlib AOR backend - AR5000 description
* Copyright (c) 2000-2003 by Stephane Fillod
*
* $Id: ar5000.c,v 1.4 2003-10-01 19:31:54 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <string.h>
#include <hamlib/rig.h>
#include "aor.h"
#define AR5000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
#define AR5000_FUNC_ALL (RIG_FUNC_TSQL|RIG_FUNC_ABM)
#define AR5000_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH)
#define AR5000_PARM (RIG_PARM_APO|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP)
#define AR5000_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define AR5000_VFO (RIG_VFO_A|RIG_VFO_B)
/*
* Data was obtained from AR5000 pdf on http://www.aoruk.com
*/
#define dBm2S(x) (x) /* FIXME */
#define AR5000_REAL_STR_CAL { 33, \
{ \
{ 0x02, dBm2S(-120) }, \
{ 0x06, dBm2S(-111) }, \
{ 0x0b, dBm2S(-110) }, \
{ 0x14, dBm2S(-109) }, \
{ 0x1d, dBm2S(-108) }, \
{ 0x25, dBm2S(-107) }, \
{ 0x2b, dBm2S(-106) }, \
{ 0x32, dBm2S(-105) }, \
{ 0x38, dBm2S(-104) }, \
{ 0x3d, dBm2S(-103) }, \
{ 0x43, dBm2S(-102) }, \
{ 0x49, dBm2S(-101) }, \
{ 0x4e, dBm2S(-100) }, \
{ 0x63, dBm2S(-95) }, \
{ 0x71, dBm2S(-90) }, \
{ 0x7f, dBm2S(-85) }, \
{ 0x8b, dBm2S(-80) }, \
{ 0x96, dBm2S(-75) }, \
{ 0xa0, dBm2S(-70) }, \
{ 0xaa, dBm2S(-65) }, \
{ 0xb3, dBm2S(-60) }, \
{ 0xbd, dBm2S(-55) }, \
{ 0xc6, dBm2S(-50) }, \
{ 0xce, dBm2S(-45) }, \
{ 0xd7, dBm2S(-40) }, \
{ 0xe0, dBm2S(-35) }, \
{ 0xe8, dBm2S(-30) }, \
{ 0xf1, dBm2S(-25) }, \
{ 0xf8, dBm2S(-20) }, \
{ 0xfa, dBm2S(-15) }, \
{ 0xfb, dBm2S(-10) }, \
{ 0xfc, dBm2S(-5) }, \
{ 0xfd, dBm2S(0) }, \
} }
static int ar5k_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int ar5k_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width);
/*
* ar5000 rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*
* part of info from http://www.aoruk.com/5000.htm
*/
const struct rig_caps ar5000_caps = {
.rig_model = RIG_MODEL_AR5000,
.model_name = "AR5000",
.mfg_name = "AOR",
.version = "0.1.1",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_SCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_XONXOFF,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = AR5000_FUNC_ALL,
.has_get_level = AR5000_LEVEL,
.has_set_level = RIG_LEVEL_SET(AR5000_LEVEL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL, /* FIXME: CTCSS list */
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { 10, 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 20,
.chan_desc_sz = 12,
.vfo_ops = AR5000_VFO_OPS,
.chan_list = { RIG_CHAN_END, }, /* FIXME: memory channel list: 1000 memories */
.rx_range_list1 = {
{kHz(10),MHz(2600),AR5000_MODES,-1,-1,AR5000_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10),MHz(2600),AR5000_MODES,-1,-1,AR5000_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = { RIG_FRNG_END, }, /* no tx range, this is a scanner! */
.tuning_steps = {
{AR5000_MODES,50},
{AR5000_MODES,100},
{AR5000_MODES,200},
{AR5000_MODES,500},
{AR5000_MODES,kHz(1)},
{AR5000_MODES,kHz(2)},
{AR5000_MODES,kHz(5)},
{AR5000_MODES,kHz(6.25)},
{AR5000_MODES,kHz(9)},
{AR5000_MODES,kHz(10)},
{AR5000_MODES,12500},
{AR5000_MODES,kHz(20)},
{AR5000_MODES,kHz(25)},
{AR5000_MODES,kHz(30)},
{AR5000_MODES,kHz(50)},
{AR5000_MODES,kHz(100)},
{AR5000_MODES,kHz(200)},
{AR5000_MODES,kHz(250)},
{AR5000_MODES,kHz(500)},
#if 0
{AR5000_MODES,0}, /* any tuning step */
#endif
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
/* mode/filter list, .remember = order matters! */
{RIG_MODE_SSB|RIG_MODE_CW, kHz(3)},
{RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)}, /* narrow */
{RIG_MODE_FM|RIG_MODE_AM, kHz(30)}, /* wide */
{RIG_MODE_WFM, kHz(220)},
{RIG_MODE_WFM, kHz(120)},
RIG_FLT_END,
},
.priv = NULL,
.rig_init = NULL,
.rig_cleanup = NULL,
.rig_open = NULL,
.rig_close = aor_close,
.set_freq = aor_set_freq,
.get_freq = aor_get_freq,
.set_mode = ar5k_set_mode,
.get_mode = ar5k_get_mode,
.set_vfo = aor_set_vfo,
.get_vfo = aor_get_vfo,
.set_level = aor_set_level,
.get_level = aor_get_level,
.set_ts = aor_set_ts,
.set_powerstat = aor_set_powerstat,
.vfo_op = aor_vfo_op,
.get_info = aor_get_info,
};
/*
* Function definitions below
*/
/*
* acknowledge is CR
* Is \r portable enough?
*/
#define CR '\r'
#define EOM "\r"
#define BUFSZ 64
/*
* modes in use by the "MD" command
*/
#define MD_FM '0'
#define MD_AM '1'
#define MD_LSB '2'
#define MD_USB '3'
#define MD_CW '4'
extern int aor_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len);
/*
* aor_set_mode
* Assumes rig!=NULL
*/
int ar5k_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
unsigned char mdbuf[BUFSZ],ackbuf[BUFSZ];
int mdbuf_len, ack_len, aormode, retval;
switch (mode) {
case RIG_MODE_FM: aormode = MD_FM; break;
case RIG_MODE_AM: aormode = MD_AM; break;
case RIG_MODE_CW: aormode = MD_CW; break;
case RIG_MODE_USB: aormode = MD_USB; break;
case RIG_MODE_LSB: aormode = MD_LSB; break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode %d\n",
__FUNCTION__,mode);
return -RIG_EINVAL;
}
mdbuf_len = sprintf(mdbuf, "MD%c" EOM, aormode);
retval = aor_transaction (rig, mdbuf, mdbuf_len, ackbuf, &ack_len);
return retval;
}
/*
* aor_get_mode
* Assumes rig!=NULL, mode!=NULL
*/
int ar5k_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
unsigned char ackbuf[BUFSZ];
int ack_len, retval;
char *rfp;
retval = aor_transaction (rig, "MD" EOM, strlen("MD" EOM), ackbuf, &ack_len);
if (retval != RIG_OK)
return retval;
rfp = strstr(ackbuf, "MD");
if (!rfp) {
rig_debug(RIG_DEBUG_WARN, "No MD in returned string in %s: '%s'\n",
__FUNCTION__, ackbuf);
return -RIG_EPROTO;
}
*width = RIG_PASSBAND_NORMAL;
switch (rfp[2]) {
case MD_AM: *mode = RIG_MODE_AM; break;
case MD_CW: *mode = RIG_MODE_CW; break;
case MD_FM: *mode = RIG_MODE_FM; break;
case MD_USB: *mode = RIG_MODE_USB; break;
case MD_LSB: *mode = RIG_MODE_LSB; break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode %d\n",
__FUNCTION__, rfp[2]);
return -RIG_EINVAL;
}
if (*width == RIG_PASSBAND_NORMAL)
*width = rig_passband_normal(rig, *mode);
return RIG_OK;
}