Hamlib/yaesu/frg9600.c

189 wiersze
5.2 KiB
C

/*
* frg9600.c - (C) Stephane Fillod 2002-2004
*
* This shared library provides an API for communicating
* via serial interface to an FRG-9600 using the "CAT" interface
*
* $Id: frg9600.c,v 1.2 2006-10-07 15:51:38 csete Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include "hamlib/rig.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
/* Private helper function prototypes */
#define FRG9600_MODES (RIG_MODE_SSB|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define FRG9600_VFOS (RIG_VFO_A)
static int frg9600_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int frg9600_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
/*
* frg9600 rigs capabilities.
* Also this struct is READONLY!
*
*/
const struct rig_caps frg9600_caps = {
.rig_model = RIG_MODEL_FRG9600,
.model_name = "FRG-9600",
.mfg_name = "Yaesu",
.version = "0.2",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 300,
.timeout = 2000,
.retry = 0,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.vfo_ops = RIG_OP_NONE,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(60), MHz(905), RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM, -1, -1, FRG9600_VFOS },
{MHz(60), MHz(460), RIG_MODE_SSB, -1, -1, FRG9600_VFOS },
RIG_FRNG_END,
}, /* Region 1 rx ranges */
.tx_range_list1 = {
RIG_FRNG_END,
}, /* region 1 TX ranges */
.rx_range_list2 = {
{MHz(60), MHz(905), RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM, -1, -1, FRG9600_VFOS },
{MHz(60), MHz(460), RIG_MODE_SSB, -1, -1, FRG9600_VFOS },
RIG_FRNG_END,
}, /* Region 2 rx ranges */
.tx_range_list2 = {
RIG_FRNG_END,
}, /* region 2 TX ranges */
.tuning_steps = {
{RIG_MODE_SSB|RIG_MODE_AM, Hz(100)},
{RIG_MODE_FM, kHz(5)},
{RIG_MODE_WFM, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, at -3dB ! */
.filters = {
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB|RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_WFM, kHz(180)},
RIG_FLT_END,
},
.set_freq = frg9600_set_freq,
.set_mode = frg9600_set_mode,
};
#define MODE_SET_LSB 0x10
#define MODE_SET_USB 0x11
#define MODE_SET_AMN 0x14
#define MODE_SET_AMW 0x15
#define MODE_SET_FMN 0x16
#define MODE_SET_WFM 0x17
int frg9600_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x0a, 0x00, 0x00, 0x00, 0x00};
/* store bcd format in cmd (MSB) */
to_bcd_be(cmd+1, freq/10, 8);
/* Frequency set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}
int frg9600_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x00};
unsigned char md;
/*
* translate mode from generic to frg9600 specific
*/
switch(mode) {
case RIG_MODE_USB: md = MODE_SET_USB; break;
case RIG_MODE_LSB: md = MODE_SET_LSB; break;
case RIG_MODE_FM: md = MODE_SET_FMN; break;
case RIG_MODE_WFM: md = MODE_SET_WFM; break;
case RIG_MODE_AM:
if (width != RIG_PASSBAND_NORMAL &&
width < rig_passband_normal(rig, mode))
md = MODE_SET_AMN;
else
md = MODE_SET_AMW;
break;
default:
return -RIG_EINVAL; /* sorry, wrong MODE */
}
cmd[0] = md;
/* Mode set */
return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
}