Hamlib/icom/ic718.c

207 wiersze
6.9 KiB
C

/*
* Hamlib CI-V backend - description of IC-718 caps
* Copyright (c) 2000-2003 by Stephane Fillod
* Caps submitted by Chuck Gilkes WD0FCL/4
*
* $Id: ic718.c,v 1.6 2003-11-16 17:14:43 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"
#define IC718_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define IC718_1MHZ_TS_MODES (RIG_MODE_AM)
#define IC718_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
/* tx doesn't have WFM.
* 100W in all modes but AM (40W)
*/
#define IC718_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define IC718_AM_TX_MODES (RIG_MODE_AM)
#define IC718_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN)
#define IC718_LEVEL_ALL (RIG_LEVEL_MICGAIN|RIG_LEVEL_NR|RIG_LEVEL_CWPITCH|RIG_LEVEL_KEYSPD|RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQLSTAT|RIG_LEVEL_RAWSTR)
#define IC718_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
#define IC718_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC718_SCAN_OPS (RIG_SCAN_MEM)
#define IC718_STR_CAL { 0, { } }
static const struct icom_priv_caps IC718_priv_caps = {
0x5e, /* default address */
0, /* 731 mode */
ic718_ts_sc_list
};
const struct rig_caps ic718_caps = {
.rig_model = RIG_MODEL_IC718,
.model_name = "IC-718",
.mfg_name = "Icom",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = IC718_FUNC_ALL,
.has_set_func = IC718_FUNC_ALL,
.has_get_level = IC718_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC718_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR].min.i = 0, [LVL_RAWSTR].max.i = 255,
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(1200),
.max_xit = Hz(0),
.max_ifshift = Hz(1200),
.targetable_vfo = 0,
.vfo_ops = IC718_VFO_OPS,
.scan_ops = IC718_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),MHz(200)-1,IC718_ALL_RX_MODES,-1,-1,IC718_VFO_ALL}, /* this trx also has UHF */
{MHz(400),MHz(470),IC718_ALL_RX_MODES,-1,-1,IC718_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = { {kHz(1800),MHz(2)-1,IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL}, /* 100W class */
{kHz(1800),MHz(2)-1,IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL}, /* 40W class */
{kHz(3500),MHz(4)-1,IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{kHz(3500),MHz(4)-1,IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{MHz(7),kHz(7300),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{MHz(7),kHz(7300),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{kHz(10100),kHz(10150),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{kHz(10100),kHz(10150),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{MHz(14),kHz(14350),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{MHz(14),kHz(14350),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{kHz(18068),kHz(18168),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{kHz(18068),kHz(18168),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{MHz(21),kHz(21450),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{MHz(21),kHz(21450),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{kHz(24890),kHz(24990),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{kHz(24890),kHz(24990),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
{MHz(28),kHz(29700),IC718_OTHER_TX_MODES,5000,100000,IC718_VFO_ALL},
{MHz(28),kHz(29700),IC718_AM_TX_MODES,2000,40000,IC718_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{IC718_1HZ_TS_MODES,1},
{IC718_ALL_RX_MODES,10},
{IC718_ALL_RX_MODES,100},
{IC718_ALL_RX_MODES,kHz(1)},
{IC718_ALL_RX_MODES,kHz(5)},
{IC718_ALL_RX_MODES,kHz(9)},
{IC718_ALL_RX_MODES,kHz(10)},
{IC718_ALL_RX_MODES,kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.1)}, /* bultin */
{RIG_MODE_CW|RIG_MODE_RTTY, Hz(500)}, /* FL-52A */
{RIG_MODE_CW|RIG_MODE_RTTY, Hz(250)}, /* FL-53A */
{RIG_MODE_SSB, kHz(2.8)}, /* FL-96 */
{RIG_MODE_SSB, kHz(1.8)}, /* FL-222 */
{RIG_MODE_AM, kHz(6)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&IC718_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_get_split_vfo,
};