Hamlib/icom/ic2730.c

206 wiersze
5.7 KiB
C

/*
* Hamlib CI-V backend - description of IC-2730 and variations
* Copyright (c) 2015 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"
#define IC2730_MODES (RIG_MODE_FM)
#define IC2730_ALL_RX_MODES (RIG_MODE_AM|IC2730_MODES)
#define IC2730_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB)
#define IC2730_SCAN_OPS RIG_SCAN_NONE
#define IC2730_VFO_OPS RIG_OP_NONE
#define IC2730_FUNC_ALL ( \
RIG_FUNC_TONE| \
RIG_FUNC_TSQL| \
RIG_FUNC_VOX)
#define IC2730_LEVEL_ALL (RIG_LEVEL_AF| \
RIG_LEVEL_SQL| \
RIG_LEVEL_RFPOWER| \
RIG_LEVEL_MICGAIN| \
RIG_LEVEL_VOXGAIN)
#define IC2730_PARM_ALL RIG_PARM_NONE
/*
* FIXME: real measurement
*/
#define IC2730_STR_CAL UNKNOWN_IC_STR_CAL
static const struct icom_priv_caps ic2730_priv_caps = {
0x90, /* default address */
0, /* 731 mode */
1, /* no XCHG */
};
const struct rig_caps ic2730_caps = {
.rig_model = RIG_MODEL_IC2730,
.model_name = "IC-2730",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_MOBILE,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC2730_FUNC_ALL,
.has_set_func = IC2730_FUNC_ALL,
.has_get_level = IC2730_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC2730_LEVEL_ALL),
.has_get_parm = IC2730_PARM_ALL,
.has_set_parm = IC2730_PARM_ALL,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = full_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC2730_VFO_OPS,
.scan_ops = IC2730_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
// There's no memory support through CI-V,
// but there is a clone mode apart.
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(118),MHz(174),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
{MHz(375),MHz(550),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
{MHz(144),MHz(146),IC2730_MODES,W(5),W(25),IC2730_VFO_ALL},
{MHz(430),MHz(440),IC2730_MODES,W(5),W(25),IC2730_VFO_ALL},
RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(118),MHz(174),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
{MHz(375),MHz(550),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = {
{MHz(144),MHz(148),IC2730_MODES,W(5),W(50),IC2730_VFO_ALL},
{MHz(430),MHz(450),IC2730_MODES,W(5),W(50),IC2730_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
// Rem: no support for changing tuning step
{IC2730_ALL_RX_MODES,kHz(5)},
{IC2730_ALL_RX_MODES,kHz(6.25)},
// The 8.33 kHz step is not selectable, depending on the operating band or mode.
{IC2730_ALL_RX_MODES,kHz(8.33)},
{IC2730_ALL_RX_MODES,kHz(10)},
{IC2730_ALL_RX_MODES,12500},
{IC2730_ALL_RX_MODES,kHz(15)},
{IC2730_ALL_RX_MODES,kHz(20)},
{IC2730_ALL_RX_MODES,kHz(25)},
{IC2730_ALL_RX_MODES,kHz(30)},
{IC2730_ALL_RX_MODES,kHz(50)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM|RIG_MODE_AM, kHz(12)},
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)},
RIG_FLT_END,
},
.str_cal = IC2730_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic2730_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_powerstat = icom_set_powerstat,
.get_powerstat = icom_get_powerstat,
.decode_event = icom_decode_event,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_code,
.get_dcs_sql = icom_get_dcs_code,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_get_split_vfo,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
};