mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/yaesu/ft5000.c

321 wiersze
12 KiB
C
Czysty Bezpośredni odnośnik Wina Historia

/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft5000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008-2010
* (C) Terry Embry 2008-2009
*
* This shared library provides an API for communicating
* via serial interface to an FT-DX5000 using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "hamlib/rig.h"
#include "bandplan.h"
#include "newcat.h"
#include "yaesu.h"
#include "ft5000.h"
#include "tones.h"
const struct newcat_priv_caps ftdx5000_priv_caps =
{
.roofing_filter_count = 11,
.roofing_filters =
{
// The index must match ext level combo index
{ .index = 0, .set_value = '0', .get_value = 0, .width = 15000, .optional = 0 },
{ .index = 1, .set_value = '1', .get_value = '1', .width = 15000, .optional = 0 },
{ .index = 2, .set_value = '2', .get_value = '2', .width = 6000, .optional = 0 },
{ .index = 3, .set_value = '3', .get_value = '3', .width = 3000, .optional = 0 },
{ .index = 4, .set_value = '4', .get_value = '7', .width = 600, .optional = 0 },
{ .index = 5, .set_value = '5', .get_value = '8', .width = 300, .optional = 0 },
{ .index = 6, .set_value = 0, .get_value = '4', .width = 15000, .optional = 0 },
{ .index = 7, .set_value = 0, .get_value = '5', .width = 6000, .optional = 0 },
{ .index = 8, .set_value = 0, .get_value = '6', .width = 3000, .optional = 0 },
{ .index = 9, .set_value = 0, .get_value = '9', .width = 600, .optional = 0 },
{ .index = 10, .set_value = 0, .get_value = 'A', .width = 300, .optional = 0 },
},
};
const struct confparams ftdx5000_ext_levels[] =
{
{
TOK_ROOFING_FILTER,
"ROOFINGFILTER",
"Roofing filter",
"Roofing filter",
NULL,
RIG_CONF_COMBO,
{
.c = {
.combostr = {
"AUTO", "15 kHz", "6 kHz", "3 kHz", "600 Hz (Main)", "300 Hz (Main)",
"AUTO - 15 kHz", "AUTO - 6 kHz", "AUTO - 3 kHz", "AUTO - 600 Hz (Main)", "AUTO - 300 Hz (Main)",
NULL
}
}
}
},
{
TOK_KEYER,
"KEYER",
"Keyer",
"Keyer on/off",
NULL,
RIG_CONF_CHECKBUTTON,
},
{
TOK_APF_WIDTH,
"APF_WIDTH",
"APF width",
"Audio peak filter width",
NULL,
RIG_CONF_COMBO,
{ .c = { .combostr = { "S. Narrow", "Narrow", "Medium", "Wide", NULL } } },
},
{
TOK_CONTOUR,
"CONTOUR",
"Contour",
"Contour on/off",
NULL,
RIG_CONF_CHECKBUTTON,
},
{
TOK_CONTOUR_FREQ,
"CONTOUR_FREQ",
"Contour frequency",
"Contour frequency",
NULL,
RIG_CONF_NUMERIC,
{ .n = { .min = 100, .max = 4000, .step = 100 } },
},
{
TOK_CONTOUR_LEVEL,
"CONTOUR_LEVEL",
"Contour level",
"Contour level (dB)",
NULL,
RIG_CONF_NUMERIC,
{ .n = { .min = -40, .max = 20, .step = 1 } },
},
{
TOK_CONTOUR_WIDTH,
"CONTOUR_WIDTH",
"Contour width",
"Contour width",
NULL,
RIG_CONF_NUMERIC,
{ .n = { .min = 1, .max = 11, .step = 1 } },
},
{ RIG_CONF_END, NULL, }
};
int ftdx5000_ext_tokens[] =
{
TOK_ROOFING_FILTER, TOK_KEYER, TOK_APF_WIDTH,
TOK_CONTOUR, TOK_CONTOUR_FREQ, TOK_CONTOUR_LEVEL, TOK_CONTOUR_WIDTH,
TOK_BACKEND_NONE
};
struct rig_caps ftdx5000_caps =
{
RIG_MODEL(RIG_MODEL_FTDX5000),
.model_name = "FTDX-5000",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".11",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG_MICDATA,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800, /* Default rate per manual */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 2, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FTDX5000_WRITE_DELAY,
.post_write_delay = FTDX5000_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 3,
.has_get_func = FTDX5000_FUNCS,
.has_set_func = FTDX5000_FUNCS,
.has_get_level = FTDX5000_LEVELS,
.has_set_level = RIG_LEVEL_SET(FTDX5000_LEVELS),
.has_get_parm = RIG_PARM_BANDSELECT,
.has_set_parm = RIG_PARM_BANDSELECT,
.level_gran =
{
#include "level_gran_yaesu.h"
[LVL_NOTCHF] = { .min = { .i = 1 }, .max = { .i = 4000 }, .step = { .i = 10 } },
[LVL_COMP] = { .min = { .f = 0 }, .max = { .f = 1.0 }, .step = { .f = 1.0f / 255.0f } },
[LVL_VOXGAIN] = { .min = { .f = 0 }, .max = { .f = 1.0 }, .step = { .f = 1.0f / 255.0f } },
},
.parm_gran = {
[PARM_BANDSELECT] = {.min = {.f = 0.0f}, .max = {.f = 1.0f}, .step = {.s = "BAND160M,BAND80M,BANDUNUSED,BAND40M,BAND30M,BAND20M,BAND17M,BAND15M,BAND12M,BAND10M,BAND6M,BANDGEN"}}
},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* TBC: Not specified in manual */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1000),
.agc_level_count = 5,
.agc_levels = { RIG_AGC_OFF, RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW, RIG_AGC_AUTO },
.vfo_ops = FTDX5000_VFO_OPS,
.scan_ops = RIG_SCAN_VFO,
.targetable_vfo = RIG_TARGETABLE_FREQ | RIG_TARGETABLE_MODE | RIG_TARGETABLE_FUNC | RIG_TARGETABLE_LEVEL | RIG_TARGETABLE_ANT | RIG_TARGETABLE_ROOFING,
.transceive = RIG_TRN_OFF, /* May enable later as the 5000 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.rfpower_meter_cal = FT5000_RFPOWER_METER_CAL,
.str_cal = FTDX5000_STR_CAL,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
{ 1, 5, RIG_MTYPE_MORSE },
RIG_CHAN_END,
},
.rx_range_list1 = {
/* General coverage + ham, ANT_5 is RX only antenna */
{kHz(30), MHz(60), FTDX5000_ALL_RX_MODES, -1, -1, FTDX5000_VFO_ALL, FTDX5000_TX_ANTS | RIG_ANT_5, "USA"},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_HF(1, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
FRQ_RNG_6m_REGION1(FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_6m_REGION1(FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(60), FTDX5000_ALL_RX_MODES, -1, -1, FTDX5000_VFO_ALL, FTDX5000_TX_ANTS | RIG_ANT_5, "EUR"},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_HF(2, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
FRQ_RNG_6m_REGION2(FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_6m_REGION2(FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FTDX5000_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FTDX5000_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FTDX5000_AM_RX_MODES, Hz(100)}, /* Normal */
{FTDX5000_AM_RX_MODES, kHz(1)}, /* Fast */
{FTDX5000_FM_RX_MODES, Hz(100)}, /* Normal */
{FTDX5000_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(1700)}, /* Normal CW, RTTY, PKT/USER */
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(4000)}, /* Wide SSB */
{FTDX5000_AM_RX_MODES, Hz(9000)}, /* Normal AM */
{FTDX5000_AM_RX_MODES, Hz(6000)}, /* Narrow AM */
{FTDX5000_FM_RX_MODES, Hz(16000)}, /* Normal FM */
{FTDX5000_FM_RX_MODES, Hz(9000)}, /* Narrow FM */
{FTDX5000_CW_RTTY_PKT_RX_MODES | RIG_MODE_SSB, RIG_FLT_ANY},
RIG_FLT_END,
},
.ext_tokens = ftdx5000_ext_tokens,
.extlevels = ftdx5000_ext_levels,
.priv = &ftdx5000_priv_caps,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
.rig_open = newcat_open, /* port opened */
.rig_close = newcat_close, /* port closed */
.cfgparams = newcat_cfg_params,
.set_conf = newcat_set_conf,
.get_conf2 = newcat_get_conf2,
.set_freq = newcat_set_freq,
.get_freq = newcat_get_freq,
.set_mode = newcat_set_mode,
.get_mode = newcat_get_mode,
.set_vfo = newcat_set_vfo,
.get_vfo = newcat_get_vfo,
.set_ptt = newcat_set_ptt,
.get_ptt = newcat_get_ptt,
.set_split_vfo = newcat_set_split_vfo,
.get_split_vfo = newcat_get_split_vfo,
.set_rit = newcat_set_rit,
.get_rit = newcat_get_rit,
.set_xit = newcat_set_xit,
.get_xit = newcat_get_xit,
.set_ant = newcat_set_ant,
.get_ant = newcat_get_ant,
.get_func = newcat_get_func,
.set_func = newcat_set_func,
.get_level = newcat_get_level,
.set_level = newcat_set_level,
.get_mem = newcat_get_mem,
.set_mem = newcat_set_mem,
.vfo_op = newcat_vfo_op,
.get_info = newcat_get_info,
.power2mW = newcat_power2mW,
.mW2power = newcat_mW2power,
.set_rptr_shift = newcat_set_rptr_shift,
.get_rptr_shift = newcat_get_rptr_shift,
.set_rptr_offs = newcat_set_rptr_offs,
.get_rptr_offs = newcat_get_rptr_offs,
.set_ctcss_tone = newcat_set_ctcss_tone,
.get_ctcss_tone = newcat_get_ctcss_tone,
.set_ctcss_sql = newcat_set_ctcss_sql,
.get_ctcss_sql = newcat_get_ctcss_sql,
.set_powerstat = newcat_set_powerstat,
.get_powerstat = newcat_get_powerstat,
.get_ts = newcat_get_ts,
.set_ts = newcat_set_ts,
.set_trn = newcat_set_trn,
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
.set_ext_level = newcat_set_ext_level,
.get_ext_level = newcat_get_ext_level,
.send_morse = newcat_send_morse,
.wait_morse = rig_wait_morse,
.scan = newcat_scan,
.morse_qsize = 50,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik