mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/yaesu/ft450.c

216 wiersze
8.7 KiB
C
Czysty Bezpośredni odnośnik Wina Historia

/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft450.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008
* (C) Terry Embry 2008-2009
*
* This shared library provides an API for communicating
* via serial interface to an FT-450 using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "hamlib/rig.h"
#include "bandplan.h"
#include "newcat.h"
#include "yaesu.h"
#include "ft450.h"
/*
* FT-450 rig capabilities
*/
struct rig_caps ft450_caps =
{
RIG_MODEL(RIG_MODEL_FT450),
.model_name = "FT-450",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".4",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800, /* Default rate per manual */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 2, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FT450_WRITE_DELAY,
.post_write_delay = FT450_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 3,
.has_get_func = FT450_FUNCS,
.has_set_func = FT450_FUNCS,
.has_get_level = FT450_LEVELS,
.has_set_level = RIG_LEVEL_SET(FT450_LEVELS),
.has_get_parm = RIG_PARM_BANDSELECT,
.has_set_parm = RIG_PARM_BANDSELECT,
.level_gran =
{
#include "level_gran_yaesu.h"
[LVL_CWPITCH] = { .min = { .i = 400 }, .max = { .i = 800 }, .step = { .i = 100 } },
[LVL_NOTCHF] = { .min = { .i = 1 }, .max = { .i = 4000 }, .step = { .i = 10 } },
[LVL_VOXGAIN] = { .min = { .f = 0 }, .max = { .f = 1.0 }, .step = { .f = 1.0f / 255.0f } },
[LVL_NR] = { .min = { .f = 0 }, .max = { .f = 1.0 }, .step = { .f = 1.0f / 11.0f } },
},
.parm_gran = {
[PARM_BANDSELECT] = {.min = {.f = 0.0f}, .max = {.f = 1.0f}, .step = {.s = "BAND160M,BAND80M,BANDUNUSED,BAND40M,BAND30M,BAND20M,BAND17M,BAND15M,BAND12M,BAND10M,BAND6M,BANDGEN"}}
},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, }, /* TBC: Not specified in manual */
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(0),
.max_ifshift = Hz(1000),
.agc_level_count = 4,
.agc_levels = { RIG_AGC_OFF, RIG_AGC_FAST, RIG_AGC_SLOW, RIG_AGC_AUTO },
.vfo_ops = FT450_VFO_OPS,
.scan_ops = RIG_SCAN_VFO,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_OFF, /* May enable later as the 450 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.rfpower_meter_cal = FT450_RFPOWER_METER_CAL,
.str_cal = FT450_STR_CAL,
.chan_list = {
{ 1, 500, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 501, 504, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
{ 1, 1, RIG_MTYPE_MORSE },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(30), MHz(60), FT450_ALL_RX_MODES, -1, -1, FT450_VFO_ALL, FT450_ANTS}, /* General coverage + ham */
RIG_FRNG_END,
}, /* FIXME: Are these the correct Region 1 values? */
.tx_range_list1 = {
FRQ_RNG_HF(1, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS),
FRQ_RNG_HF(1, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */
FRQ_RNG_6m(1, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS),
FRQ_RNG_6m(1, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(56), FT450_ALL_RX_MODES, -1, -1, FT450_VFO_ALL, FT450_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS),
FRQ_RNG_HF(2, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */
FRQ_RNG_6m(2, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS),
FRQ_RNG_6m(2, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT450_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT450_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT450_AM_RX_MODES, Hz(100)}, /* Normal */
{FT450_AM_RX_MODES, kHz(1)}, /* Fast */
{FT450_FM_RX_MODES, Hz(100)}, /* Normal */
{FT450_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{FT450_CW_RTTY_PKT_RX_MODES, Hz(1800)}, /* Normal CW, RTTY, PKT/USER */
{FT450_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FT450_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(3000)}, /* Wide SSB */
{RIG_MODE_AM, Hz(6000)}, /* Normal AM */
{RIG_MODE_AM, Hz(3000)}, /* Narrow AM */
{FT450_FM_RX_MODES, Hz(12000)}, /* Normal FM */
{FT450_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
RIG_FLT_END,
},
.priv = NULL, /* private data FIXME: */
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
.rig_open = newcat_open, /* port opened */
.rig_close = newcat_close, /* port closed */
.cfgparams = newcat_cfg_params,
.set_conf = newcat_set_conf,
.get_conf2 = newcat_get_conf2,
.set_freq = newcat_set_freq,
.get_freq = newcat_get_freq,
.set_mode = newcat_set_mode,
.get_mode = newcat_get_mode,
.set_vfo = newcat_set_vfo,
.get_vfo = newcat_get_vfo,
.set_ptt = newcat_set_ptt,
.get_ptt = newcat_get_ptt,
.set_split_vfo = newcat_set_split_vfo,
.get_split_vfo = newcat_get_split_vfo,
.set_rit = newcat_set_rit,
.get_rit = newcat_get_rit,
.get_func = newcat_get_func,
.set_func = newcat_set_func,
.get_level = newcat_get_level,
.set_level = newcat_set_level,
.get_mem = newcat_get_mem,
.set_mem = newcat_set_mem,
.vfo_op = newcat_vfo_op,
.get_info = newcat_get_info,
.power2mW = newcat_power2mW,
.mW2power = newcat_mW2power,
.set_rptr_shift = newcat_set_rptr_shift,
.get_rptr_shift = newcat_get_rptr_shift,
.set_rptr_offs = newcat_set_rptr_offs,
.get_rptr_offs = newcat_get_rptr_offs,
.set_ctcss_tone = newcat_set_ctcss_tone,
.get_ctcss_tone = newcat_get_ctcss_tone,
.set_ctcss_sql = newcat_set_ctcss_sql,
.get_ctcss_sql = newcat_get_ctcss_sql,
.set_powerstat = newcat_set_powerstat,
.get_powerstat = newcat_get_powerstat,
.get_ts = newcat_get_ts,
.set_ts = newcat_set_ts,
.set_trn = newcat_set_trn,
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
.send_morse = newcat_send_morse,
.wait_morse = rig_wait_morse,
.scan = newcat_scan,
.morse_qsize = 40,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
struct rig_caps ft450d_caps;
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik