Hamlib/rigs/lowe/hf235.c

133 wiersze
3.5 KiB
C

/*
* Hamlib Lowe backend - HF-235 description
* Copyright (c) 2003 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <stdlib.h>
#include <hamlib/rig.h>
#include "lowe.h"
#define HF235_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM|RIG_MODE_FM)
#define HF235_FUNC (RIG_FUNC_LOCK|RIG_FUNC_MUTE)
#define HF235_LEVEL_ALL (RIG_LEVEL_STRENGTH)
#define HF235_PARM_ALL (RIG_PARM_NONE)
#define HF235_VFO (RIG_VFO_A)
#define HF235_VFO_OPS (RIG_OP_NONE)
/*
* HF-235 rig capabilities.
*
*/
struct rig_caps hf235_caps =
{
RIG_MODEL(RIG_MODEL_HF235),
.model_name = "HF-235",
.mfg_name = "Lowe",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE, /* and only basic support */
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 1,
.timeout = 200,
.retry = 3,
.has_get_func = HF235_FUNC,
.has_set_func = HF235_FUNC,
.has_get_level = HF235_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(HF235_LEVEL_ALL),
.has_get_parm = HF235_PARM_ALL,
.has_set_parm = RIG_PARM_SET(HF235_PARM_ALL),
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 7,
.vfo_ops = HF235_VFO_OPS,
.chan_list = {
RIG_CHAN_END, /* FIXME */
},
.rx_range_list1 = {
{kHz(30), MHz(30), HF235_MODES, -1, -1, HF235_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(30), MHz(30), HF235_MODES, -1, -1, HF235_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{HF235_MODES, 10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_AM, kHz(2.2)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = NULL,
.set_freq = lowe_set_freq,
.get_freq = lowe_get_freq,
.set_mode = lowe_set_mode,
.get_mode = lowe_get_mode,
//.set_func = lowe_set_func,
.get_level = lowe_get_level,
.reset = lowe_reset,
.get_info = lowe_get_info,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/