mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/kenwood/ts590.c

437 wiersze
20 KiB
C
Czysty Bezpośredni odnośnik Wina Historia

/*
* Hamlib Kenwood backend - TS590 description
* Copyright (c) 2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <stdio.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "kenwood.h"
/* Function declarations */
const char* ts590_get_info(RIG *rig);
#define TS590_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define TS590_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS590_AM_TX_MODES RIG_MODE_AM
#define TS590_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define TS590_LEVEL_ALL (RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|\
RIG_LEVEL_CWPITCH|RIG_LEVEL_METER|RIG_LEVEL_SWR|RIG_LEVEL_ALC|\
RIG_LEVEL_SQL|RIG_LEVEL_AGC|RIG_LEVEL_STRENGTH)
#define TS590_FUNC_ALL (RIG_FUNC_LOCK|RIG_FUNC_AIP|RIG_FUNC_TONE|\
RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_NR|RIG_FUNC_NR|RIG_FUNC_BC)
#define TS590_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS590_SCAN_OPS (RIG_SCAN_VFO)
#define TS590_ANTS (RIG_ANT_1|RIG_ANT_2)
#define TS590_CHANNEL_CAPS { \
.freq=1,\
.mode=1,\
.tx_freq=1,\
.tx_mode=1,\
.split=1,\
.funcs=RIG_FUNC_TONE, \
.flags=RIG_CHFLAG_SKIP \
}
static struct kenwood_priv_caps ts590_priv_caps = {
.cmdtrm = EOM_KEN,
};
/*
* ts590 rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*/
const struct rig_caps ts590_caps = {
.rig_model = RIG_MODEL_TS590S,
.model_name = "TS-590S",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG_MICDATA,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 115200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 500,
.retry = 10,
.preamp = {12, RIG_DBLST_END,},
.attenuator = {12, RIG_DBLST_END,},
.max_rit = kHz (9.99),
.max_xit = kHz (9.99),
.max_ifshift = Hz (0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.chan_list = { /* TBC */
{ 0, 89, RIG_MTYPE_MEM, TS590_CHANNEL_CAPS },
{ 90, 99, RIG_MTYPE_EDGE, TS590_CHANNEL_CAPS },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(30), Hz(59999999), TS590_ALL_MODES, -1, -1, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 1 */
.tx_range_list1 = {
{kHz(1810), kHz(1850), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS}, /* 100W class */
{kHz(1810), kHz(1850), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS}, /* 25W class */
{kHz(3500), kHz(3800), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(3500), kHz(3800), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7200), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7200), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 1 */
.rx_range_list2 = {
{kHz(30), Hz(59999999), TS590_ALL_MODES, -1, -1, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 2 */
.tx_range_list2 = {
{kHz(1800), MHz(2) - 1, TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS}, /* 100W class */
{kHz(1800), MHz(2) - 1, TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS}, /* 25W class */
{kHz(3500), MHz(4) - 1, TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(3500), MHz(4) - 1, TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(5250), kHz(5450), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(5250), kHz(5450), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7300), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7300), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 2 */
.tuning_steps = {
{TS590_ALL_MODES,kHz(1)},
{TS590_ALL_MODES,Hz(2500)},
{TS590_ALL_MODES,kHz(5)},
{TS590_ALL_MODES,Hz(6250)},
{TS590_ALL_MODES,kHz(10)},
{TS590_ALL_MODES,Hz(12500)},
{TS590_ALL_MODES,kHz(15)},
{TS590_ALL_MODES,kHz(20)},
{TS590_ALL_MODES,kHz(25)},
{TS590_ALL_MODES,kHz(30)},
{TS590_ALL_MODES,kHz(100)},
{TS590_ALL_MODES,kHz(500)},
{TS590_ALL_MODES,MHz(1)},
{TS590_ALL_MODES,0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.2)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *) &ts590_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.rig_open = kenwood_open,
.rig_close = kenwood_close,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit, /* FIXME should this switch to rit mode or just set the frequency? */
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit, /* FIXME should this switch to xit mode or just set the frequency? */
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split_vfo,
.get_split_vfo = kenwood_get_split_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.get_info = ts590_get_info,
.reset = kenwood_reset,
.set_ant = kenwood_set_ant,
.get_ant = kenwood_get_ant,
.scan_ops = TS590_SCAN_OPS,
.scan = kenwood_scan, /* not working, invalid arguments using rigctl; kenwood_scan does only support on/off and not tone and CTCSS scan */
.has_set_level = RIG_LEVEL_SET(TS590_LEVEL_ALL),
.has_get_level = TS590_LEVEL_ALL,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.has_get_func = TS590_FUNC_ALL,
.has_set_func = TS590_FUNC_ALL,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_ctcss_tone = kenwood_set_ctcss_tone,
.get_ctcss_tone = kenwood_get_ctcss_tone,
.ctcss_list = kenwood38_ctcss_list,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.send_morse = kenwood_send_morse,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem,
.set_channel = kenwood_set_channel,
.get_channel = kenwood_get_channel,
.vfo_ops = TS590_VFO_OPS,
.vfo_op = kenwood_vfo_op,
};
const struct rig_caps ts590sg_caps = {
.rig_model = RIG_MODEL_TS590SG,
.model_name = "TS-590SG",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG_MICDATA,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 115200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 500,
.retry = 10,
.preamp = {12, RIG_DBLST_END,},
.attenuator = {12, RIG_DBLST_END,},
.max_rit = kHz (9.99),
.max_xit = kHz (9.99),
.max_ifshift = Hz (0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.chan_list = { /* TBC */
{ 0, 89, RIG_MTYPE_MEM, TS590_CHANNEL_CAPS },
{ 90, 99, RIG_MTYPE_EDGE, TS590_CHANNEL_CAPS },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(30), Hz(59999999), TS590_ALL_MODES, -1, -1, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 1 */
.tx_range_list1 = {
{kHz(1810), kHz(1850), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS}, /* 100W class */
{kHz(1810), kHz(1850), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS}, /* 25W class */
{kHz(3500), kHz(3800), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(3500), kHz(3800), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7200), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7200), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 1 */
.rx_range_list2 = {
{kHz(30), Hz(59999999), TS590_ALL_MODES, -1, -1, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Receive frequency range list for ITU region 2 */
.tx_range_list2 = {
{kHz(1800), MHz(2) - 1, TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS}, /* 100W class */
{kHz(1800), MHz(2) - 1, TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS}, /* 25W class */
{kHz(3500), MHz(4) - 1, TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(3500), MHz(4) - 1, TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(5250), kHz(5450), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(5250), kHz(5450), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7300), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(7), kHz(7300), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(10100), kHz(10150), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(14), kHz(14350), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(18068), kHz(18168), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(21), kHz(21450), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{kHz(24890), kHz(24990), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(28), kHz(29700), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_OTHER_TX_MODES, 5000, 100000, TS590_VFO, TS590_ANTS},
{MHz(50), kHz(52000), TS590_AM_TX_MODES, 5000, 25000, TS590_VFO, TS590_ANTS},
RIG_FRNG_END,
}, /*!< Transmit frequency range list for ITU region 2 */
.tuning_steps = {
{TS590_ALL_MODES,kHz(1)},
{TS590_ALL_MODES,Hz(2500)},
{TS590_ALL_MODES,kHz(5)},
{TS590_ALL_MODES,Hz(6250)},
{TS590_ALL_MODES,kHz(10)},
{TS590_ALL_MODES,Hz(12500)},
{TS590_ALL_MODES,kHz(15)},
{TS590_ALL_MODES,kHz(20)},
{TS590_ALL_MODES,kHz(25)},
{TS590_ALL_MODES,kHz(30)},
{TS590_ALL_MODES,kHz(100)},
{TS590_ALL_MODES,kHz(500)},
{TS590_ALL_MODES,MHz(1)},
{TS590_ALL_MODES,0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.2)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *) &ts590_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.rig_open = kenwood_open,
.rig_close = kenwood_close,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit, /* FIXME should this switch to rit mode or just set the frequency? */
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit, /* FIXME should this switch to xit mode or just set the frequency? */
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split_vfo,
.get_split_vfo = kenwood_get_split_vfo_if,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_powerstat = kenwood_set_powerstat,
.get_powerstat = kenwood_get_powerstat,
.get_info = kenwood_get_info,
.reset = kenwood_reset,
.set_ant = kenwood_set_ant,
.get_ant = kenwood_get_ant,
.scan_ops = TS590_SCAN_OPS,
.scan = kenwood_scan, /* not working, invalid arguments using rigctl; kenwood_scan does only support on/off and not tone and CTCSS scan */
.has_set_level = RIG_LEVEL_SET(TS590_LEVEL_ALL),
.has_get_level = TS590_LEVEL_ALL,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.has_get_func = TS590_FUNC_ALL,
.has_set_func = TS590_FUNC_ALL,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_ctcss_tone = kenwood_set_ctcss_tone,
.get_ctcss_tone = kenwood_get_ctcss_tone,
.ctcss_list = kenwood38_ctcss_list,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.send_morse = kenwood_send_morse,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem,
.set_channel = kenwood_set_channel,
.get_channel = kenwood_get_channel,
.vfo_ops = TS590_VFO_OPS,
.vfo_op = kenwood_vfo_op,
};
/*
* Function definitions below
*/
/*
* ts590_get_info
* This is not documented in the manual as of 3/11/15 but confirmed from Kenwood
* "TY" produces "TYK 00" for example
*/
const char* ts590_get_info(RIG *rig)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
return "*rig == NULL";
char firmbuf[10];
int retval;
retval = kenwood_safe_transaction(rig, "TY", firmbuf, 10, 6);
if (retval != RIG_OK)
return NULL;
switch (firmbuf[2]) {
case 'K': return "Firmware: USA version";
case 'E': return "Firmware: European version";
default: return "Firmware: unknown";
}
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik