/*
 *  Hamlib AOR backend - AR8000 description
 *  Copyright (c) 2000,2001,2002 by Stephane Fillod
 *
 *		$Id: ar8000.c,v 1.2 2002-01-09 23:11:16 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <hamlib/rig.h>
#include "aor.h"


#define AR8000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)

#define AR8000_FUNC_ALL (RIG_FUNC_TSQL|RIG_FUNC_ABM)

#define AR8000_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH)

#define AR8000_PARM (RIG_PARM_APO|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP)

#define AR8000_VFO_OPS (RIG_OP_MCL|RIG_OP_UP|RIG_OP_DOWN|RIG_OP_LEFT|RIG_OP_RIGHT)

#define AR8000_VFO (RIG_VFO_A|RIG_VFO_B)

/*
 * ar8000 rig capabilities.
 * Notice that some rigs share the same functions.
 * Also this struct is READONLY!
 *
 * part of info from http://www.aoruk.com/8000.htm
 */
const struct rig_caps ar8000_caps = {
rig_model: RIG_MODEL_AR8000,
model_name:"AR8000",
mfg_name: "AOR",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_SCANNER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 4800,
serial_rate_max: 19200,
serial_data_bits: 8,
serial_stop_bits: 2,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_XONXOFF,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,
has_get_func: RIG_FUNC_NONE,
has_set_func: AR8000_FUNC_ALL,
has_get_level: AR8000_LEVEL,
has_set_level: RIG_LEVEL_SET(AR8000_LEVEL),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,    /* FIXME: parms */
level_gran: {},                 /* FIXME: granularity */
parm_gran: {},
ctcss_list: NULL,				/* FIXME: CTCSS list */
dcs_list: NULL,
preamp:  { RIG_DBLST_END, },
attenuator:  { 20, RIG_DBLST_END, },	/* TBC */
max_rit: Hz(0),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
transceive: RIG_TRN_RIG,
bank_qty:  20,
chan_desc_sz: 12,
vfo_ops: AR8000_VFO_OPS,

chan_list: { RIG_CHAN_END, },	/* FIXME: memory channel list: 1000 memories */

rx_range_list1: { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: {
	{kHz(500),MHz(1900),AR8000_MODES,-1,-1,AR8000_VFO},
	RIG_FRNG_END,
  }, /* rx range */
tx_range_list2: { RIG_FRNG_END, },	/* no tx range, this is a scanner! */

tuning_steps: {
	 {AR8000_MODES,50},
	 {AR8000_MODES,100},
	 {AR8000_MODES,200},
	 {AR8000_MODES,500},
	 {AR8000_MODES,kHz(1)},
	 {AR8000_MODES,kHz(2)},
	 {AR8000_MODES,kHz(5)},
	 {AR8000_MODES,kHz(6.25)},
	 {AR8000_MODES,kHz(9)},
	 {AR8000_MODES,kHz(10)},
	 {AR8000_MODES,12500},
	 {AR8000_MODES,kHz(20)},
	 {AR8000_MODES,kHz(25)},
	 {AR8000_MODES,kHz(30)},
	 {AR8000_MODES,kHz(50)},
	 {AR8000_MODES,kHz(100)},
	 {AR8000_MODES,kHz(200)},
	 {AR8000_MODES,kHz(250)},
	 {AR8000_MODES,kHz(500)},
#if 0 
	 {AR8000_MODES,0},	/* any tuning step */
#endif
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
filters: {
        /* mode/filter list, remember: order matters! */
		{RIG_MODE_SSB|RIG_MODE_CW, kHz(2)}, 
		{RIG_MODE_FM|RIG_MODE_AM, kHz(12)}, 
		{RIG_MODE_WFM, kHz(180)}, /* 50kHz at -3dB, 380kHz at -20dB */
		RIG_FLT_END,
	},

priv: NULL,
rig_init: NULL,
rig_cleanup: NULL,
rig_open: NULL,
rig_close: aor_close,

set_freq: aor_set_freq,
get_freq: aor_get_freq,
set_mode: aor_set_mode,
get_mode: aor_get_mode,
set_vfo: aor_set_vfo,
get_vfo: aor_get_vfo,

set_ts: aor_set_ts,
set_powerstat: aor_set_powerstat,
vfo_op: aor_vfo_op,
get_info: aor_get_info,

};

/*
 * Function definitions below
 */