/*
 *  Hamlib Uniden backend - Radio Shack PRO-2052 description
 *  Copyright (c) 2001-2008 by Stephane Fillod
 *
 *	$Id: pro2052.c,v 1.1 2008-05-04 14:23:54 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "uniden.h"


#define PRO2052_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define PRO2052_FUNC (RIG_FUNC_MUTE)

#define PRO2052_LEVEL_ALL (RIG_LEVEL_NONE)

#define PRO2052_PARM_ALL (RIG_PARM_NONE)

#define PRO2052_VFO RIG_VFO_A

#define PRO2052_CHANNEL_CAPS \
		UNIDEN_CHANNEL_CAPS

/*
 * PRO-2052 rig capabilities.
 *
 * From http://www.cantonmaine.com/pro2052.htm:
 * After connecting the cable, turn on the computer and the scanner and then
 * press and hold the Remote/Hold button on the scanner until you see "SFT"
 * flashing on the right side of the LCD. You should now be communicating
 * with the scanner. If it doesn't work, check all the normal stuff for
 * whatever it was you overlooked. NOTE: You can change the scanner's
 * default * baud rate by holding down the Remote/Hold button while turning
 * on the scanner.)
 *
 * TODO: check this with manual or web site.
 */
const struct rig_caps pro2052_caps = {
.rig_model =  RIG_MODEL_PRO2052,
.model_name = "PRO-2052",
.mfg_name =  "Radio Shack",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRUNKSCANNER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  2400,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  1,
.timeout =  200,
.retry =  3,

.has_get_func =  PRO2052_FUNC,
.has_set_func =  PRO2052_FUNC,
.has_get_level =  PRO2052_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(PRO2052_LEVEL_ALL),
.has_get_parm =  PRO2052_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(PRO2052_PARM_ALL),
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  NULL,	/* FIXME: CTCSS list? */
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   10,	/* A..J */
.chan_desc_sz =  0,

.chan_list =  {
		{ 0, 999, RIG_MTYPE_MEM, {PRO2052_CHANNEL_CAPS} },
		RIG_CHAN_END,
	},

.rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
.tx_range_list1 =  { RIG_FRNG_END, },

.rx_range_list2 =  {
	{MHz(29),MHz(54),PRO2052_MODES,-1,-1,PRO2052_VFO},
	{MHz(108),MHz(174),PRO2052_MODES,-1,-1,PRO2052_VFO},
	{MHz(179.75),MHz(512),PRO2052_MODES,-1,-1,PRO2052_VFO},
	{MHz(806),MHz(823.9375),PRO2052_MODES,-1,-1,PRO2052_VFO},
	{MHz(851),MHz(868.9875),PRO2052_MODES,-1,-1,PRO2052_VFO},
	{MHz(896.1125),MHz(956),PRO2052_MODES,-1,-1,PRO2052_VFO},
	{MHz(1240),MHz(1300),PRO2052_MODES,-1,-1,PRO2052_VFO},
	RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },

.tuning_steps =  {
	 {PRO2052_MODES,kHz(5)},
	 {PRO2052_MODES,kHz(7.5)},
	 {PRO2052_MODES,kHz(10)},
	 {PRO2052_MODES,kHz(12.5)},
	 {PRO2052_MODES,kHz(25)},
	 {PRO2052_MODES,kHz(50)},
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
		{RIG_MODE_WFM, kHz(230)},
		RIG_FLT_END,
	},
.priv =  NULL,

.set_freq =  uniden_set_freq,
.get_freq =  uniden_get_freq,
.set_mode =  uniden_set_mode,
.get_mode =  uniden_get_mode,
.set_mem =  uniden_set_mem,
.get_mem =  uniden_get_mem,
.get_dcd =  uniden_get_dcd,
.get_info =  uniden_get_info,
.get_level = uniden_get_level,
.set_level = uniden_set_level,
.get_channel = uniden_get_channel,
.set_channel = uniden_set_channel,

};

/*
 * Function definitions below
 */