/* * Hamlib CI-V backend - description of IC-R30 * Copyright (c) 2018 Malcolm Herring * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #include "hamlib/rig.h" #include "token.h" #include "icom.h" #include "idx_builtin.h" #include "icom_defs.h" #include "frame.h" #include "tones.h" #define ICR30_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_AM|RIG_MODE_AMN|\ RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_FMN|RIG_MODE_WFM|\ RIG_MODE_RTTYR|RIG_MODE_SAM|RIG_MODE_SAL|RIG_MODE_SAH|RIG_MODE_P25|\ RIG_MODE_DSTAR|RIG_MODE_DPMR|RIG_MODE_NXDNVN|RIG_MODE_NXDN_N|RIG_MODE_DCR) #define ICR30_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_AFC|RIG_FUNC_VSC|\ RIG_FUNC_CSQL|RIG_FUNC_DSQL|RIG_FUNC_ANL|RIG_FUNC_CSQL|RIG_FUNC_SCEN) #define ICR30_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_RF|\ RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH) #define ICR30_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB) #define ICR30_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL) #define ICR30_SCAN_OPS (RIG_SCAN_NONE) #define TOK_ANL TOKEN_BACKEND(001) #define TOK_EAR TOKEN_BACKEND(002) #define TOK_REC TOKEN_BACKEND(003) int icr30_tokens[] = { TOK_ANL, TOK_EAR, TOK_REC, TOK_DSTAR_DSQL, TOK_DSTAR_CALL_SIGN, TOK_DSTAR_MESSAGE, TOK_DSTAR_STATUS, TOK_DSTAR_GPS_DATA, TOK_DSTAR_GPS_MESS, TOK_DSTAR_CODE, TOK_DSTAR_TX_DATA, TOK_BACKEND_NONE }; struct confparams icr30_ext[] = { { TOK_ANL, "anl", "Auto noise limiter", "", "", RIG_CONF_CHECKBUTTON, {} }, { TOK_EAR, "ear", "Earphone mode", "", "", RIG_CONF_CHECKBUTTON, {} }, { TOK_REC, "record", "Recorder on/off", "", "", RIG_CONF_CHECKBUTTON, {} }, { 0 } }; struct cmdparams icr30_extcmds[] = { { {.t = TOK_ANL}, CMD_PARAM_TYPE_TOKEN, C_CTL_MEM, S_MEM_ANL, SC_MOD_RW, 0, {}, CMD_DAT_BOL, 1 }, { {.t = TOK_EAR}, CMD_PARAM_TYPE_TOKEN, C_CTL_MEM, S_MEM_EAR, SC_MOD_RW, 0, {}, CMD_DAT_BOL, 1 }, { {.t = TOK_REC}, CMD_PARAM_TYPE_TOKEN, C_CTL_MEM, S_MEM_REC, SC_MOD_WR, 0, {}, CMD_DAT_BOL, 1 }, { {0} } }; #define ICR30_STR_CAL { 2, \ { \ { 0, -60 }, /* S0 */ \ { 255, 60 } /* +60 */ \ } } /* * This function does the special bandwidth coding for IC-R30 * (1 - normal, 2 - narrow) */ static int icr30_r2i_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width, unsigned char *md, signed char *pd) { int err; err = rig2icom_mode(rig, vfo, mode, width, md, pd); if (*pd == PD_NARROW_3) { *pd = PD_NARROW_2; } return err; } /* * This function handles the -N modes for IC-R30 */ int icr30_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { if (mode & (RIG_MODE_AMN | RIG_MODE_FMN)) { return icom_set_mode(rig, vfo, mode, (pbwidth_t)1); } else { return icom_set_mode(rig, vfo, mode, width); } } static struct icom_priv_caps icr30_priv_caps = { 0x9c, /* default address */ 0, /* 731 mode */ 0, /* no XCHG */ r8500_ts_sc_list, /* wrong, but don't have set_ts anyway */ .antack_len = 2, .ant_count = 2, .r2i_mode = icr30_r2i_mode, .offs_len = 4, .extcmds = icr30_extcmds /* Custom ext_parm parameters */ }; struct rig_caps icr30_caps = { RIG_MODEL(RIG_MODEL_ICR30), .model_name = "IC-R30", .mfg_name = "Icom", .version = BACKEND_VER ".0", .copyright = "LGPL", .status = RIG_STATUS_STABLE, .rig_type = RIG_TYPE_RECEIVER | RIG_FLAG_HANDHELD, .ptt_type = RIG_PTT_NONE, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = ICR30_FUNC_ALL, .has_set_func = ICR30_FUNC_ALL, .has_get_level = ICR30_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(ICR30_LEVEL_ALL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .ext_tokens = icr30_tokens, .extfuncs = icr30_ext, .extparms = icom_ext_parms, .ctcss_list = common_ctcss_list, .dcs_list = common_dcs_list, .preamp = { RIG_DBLST_END, }, .attenuator = { 15, 30, 35, RIG_DBLST_END, }, .max_rit = Hz(0), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = ICR30_VFO_OPS, .scan_ops = ICR30_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 999, RIG_MTYPE_MEM }, /* TBC */ { 1000, 1199, RIG_MTYPE_MEM }, /* auto-write */ { 1200, 1299, RIG_MTYPE_EDGE }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { /* Other countries but France */ {kHz(100), GHz(3.3049999), ICR30_MODES, -1, -1, ICR30_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { RIG_FRNG_END, }, .rx_range_list2 = { /* USA */ {kHz(100), MHz(821.995), ICR30_MODES, -1, -1, ICR30_VFO_ALL}, {MHz(851), MHz(866.995), ICR30_MODES, -1, -1, ICR30_VFO_ALL}, {MHz(896), GHz(3.3049999), ICR30_MODES, -1, -1, ICR30_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { RIG_FRNG_END, }, .tuning_steps = { {ICR30_MODES, Hz(10)}, {ICR30_MODES, Hz(100)}, {ICR30_MODES, Hz(1000)}, {ICR30_MODES, Hz(3125)}, {ICR30_MODES, Hz(5000)}, {ICR30_MODES, Hz(6250)}, {ICR30_MODES, Hz(8330)}, {ICR30_MODES, Hz(9000)}, {ICR30_MODES, Hz(10000)}, {ICR30_MODES, Hz(12500)}, {ICR30_MODES, kHz(15)}, {ICR30_MODES, kHz(20)}, {ICR30_MODES, kHz(25)}, {ICR30_MODES, kHz(30)}, {ICR30_MODES, kHz(50)}, {ICR30_MODES, kHz(100)}, {ICR30_MODES, kHz(125)}, {ICR30_MODES, kHz(200)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_USB | RIG_MODE_LSB, kHz(1.8)}, {RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_AMN | RIG_MODE_FMN, kHz(12)}, {RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_AMN | RIG_MODE_FMN, kHz(6)}, {RIG_MODE_WFM, kHz(150)}, RIG_FLT_END, }, .str_cal = ICR30_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .set_powerstat = icom_set_powerstat, .get_powerstat = icom_get_powerstat, .priv = (void *)& icr30_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = icom_rig_open, .rig_close = icom_rig_close, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icr30_set_mode, .get_mode = icom_get_mode, .vfo_op = icom_vfo_op, .set_vfo = icom_set_vfo, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .set_bank = icom_set_bank, .set_mem = icom_set_mem, .decode_event = icom_decode_event, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_parm = icom_set_parm, .get_parm = icom_get_parm, .set_ext_parm = icom_set_ext_parm, .get_ext_parm = icom_get_ext_parm, .set_ext_level = icom_set_ext_level, .get_ext_level = icom_get_ext_level, .set_ext_func = icom_set_ext_func, .get_ext_func = icom_get_ext_func, .get_dcd = icom_get_dcd, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_dcs_sql = icom_set_dcs_sql, .get_dcs_sql = icom_get_dcs_sql, .hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS };