Hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com) (C) Stephane Fillod 2000-2011 (C) The Hamlib Group 2000-2011 Take a look at http://sourceforge.net/projects/hamlib/ Here you will find a mail list, and the latest releases. See README for frontend/backend outline. See README.betatester for background on testing Hamlib. The shared libs provide functions for both radio control, and data retrieval from the radio. The structure of the libraries is as follows. (1) There is one frontend library "libhamlib" that provides the generic API for user applications. (2) There are "n" backend libraries that "wrap" rig specific communications inside frontend API. (3) Frontend lib loads (on demand) the appropriate backend lib as required. Frontend Library ---------------- libhamlib.so - frontend lib that provides generic API for all RIG types. This is what Application programmers will "see". Backend Examples are: --------------------- 1.hamlib-yaesu.so will provide connectivity to Yaesu FT 747GX Transceiver, FT 847 "Earth Station", etc. via a standard API. 2. hamlib-xxxx.so will provide connectivity to the Wiz-bang moon-melter 101A (yikes..) Hamlib also enables developers to develop professional looking GUI's towards a standard control library API, and they would not have to worry about the underlying connection towards physical hardware. Serial (RS232) connectivity is built in as are RPC, IP (also via a socket utility), and USB. Other connectivity will follow afterwards. General Guidelines. ------------------- 0. The top level directory looks like this as of 13 Feb 2011 (Note, it has grown considerably). $ tree -d -I .git . ├── alinco ├── aor ├── ars ├── bindings ├── c++ ├── doc ├── drake ├── dummy ├── easycomm ├── flexradio ├── fodtrack ├── gnuradio ├── gs232a ├── heathkit ├── icom ├── include │   └── hamlib ├── jrc ├── kachina ├── kenwood ├── kit ├── kylix │   └── tests ├── lib ├── lowe ├── m2 ├── macros ├── microtune ├── miniVNA ├── pcr ├── perl ├── prm80 ├── racal ├── rft ├── rotorez ├── rpcrig ├── rpcrot ├── rs ├── sartek ├── skanti ├── spid ├── src ├── tapr ├── tentec ├── tests │   ├── config │   ├── rigctl.test │   ├── testbcd.test │   ├── testfreq.test │   └── testloc.test ├── tuner ├── uniden ├── winradio │   └── linradio ├── wj └── yaesu 56 directories 1. Building If you just want to recompile the library, please refer to the INSTALL file. This document introduces hacking the code of Hamlib. 1.1 Obtaining sources: git clone git clone git://hamlib.git.sourceforge.net/gitroot/hamlib/hamlib The clone has to only be done the first time. After the initial clone, whenever you want to update your local repository, issue the following command in the root directory of hamlib. git pull This will download and merge any changes from the canonical Hamlib Git repository (what Git calls origin by default). This command actually combines two Git commands, fetch and merge into one that will first check for conflicting changes between your local repository and the remote (origin) repository and will not apply any changes if conflicts are found. 1.1.1 Obtaining more info on Git Check out the Source Forge page at https://sourceforge.net/scm/?type=git&group_id=8305 for more information about how to use the Git repository of Hamlib. Much documentation on Git exists. A good starting point is: http://git-scm.com/documentation From this page are links to toturials, books (Pro Git proved useful for me), and references (http://gitref.org/ is another good resource). Another site: http://www-cs-students.stanford.edu/~blynn/gitmagic/ 1.1.2 Providing patches with Git Git provides tools to generate patches and submit them to the Hamlib developers via email. Use of these tools is prefered as Git allows credit to be given to the author and submitter of the patches. Please submit the patches to the hamlib-developer mailing list. See section 8.3. 1.1.3 Git and branches One of the most powerful features of Git is its ability to make working with branches easy. It also allows the developers to "cherry pick" patches from the master development branch into stable release branches. In this manner we can accomodate patches submitted against a stable release and merge them into master as well. Such parallel development is a new feature for our project and there will be a learning curve! After cloning the repository as above, the repository is synchronized with the "master" branch. This can be confirmed by 'git branch'. A new branch can be created by providing a name, 'git branch n0nb_k3_level' which will now exist as a branch in your local repository. This is a good way to work on new features as Git keeps changes to files in each branch separate. As you can see: $ git branch Hamlib-1.2.13 Hamlib-1.2.13.1 * master n0nb_k3 there are a number of branches in my local repository. Most, such as "Hamlib-1.2.13", exist in the canonical repository as well. They can be seen by 'git branch -r' and you can switch to any of them using the 'git checkout BRANCH_NAME' command. Finally, once your changes are ready for inclusion in Hamlib, commit your changes to the branch you are working in, checkout the master branch, and use 'git merge' to synchronize your changes into the master branch. Lastly, push your changes to the canonical repository (developer write access and checkout using the SSH protocol required. See https://sourceforge.net/scm/?type=git&group_id=8305) or email them to hamlib-developer@lists.sourceforge.net for inclusion into Hamlib. 1.1.4 Summary This is a very brief introduction to Git for Hamlib developers. Day-to-day Git usage involves a handful of commands--clone, status, commit, pull, branch, checkout, merge, and push are probably the most common. Other useful commands are log and diff to see changes (especially when color output is enabled in your Git configuration). See the references above to learn about setting up Git to your preference. If you like a GUI tool several exist. Gitk and Gitg are similar with the former being written with the Tk toolkit and the latter in GTK+. Another is Giggle with its own interface. All allow looking at the complete history of the repository and changes made to any file. 1.2. Requirements Hamlib is entirely developed using GNU tools, under various Linux systems. Note that Hamlib is not restricted to Linux systems. We welcome anyone who has access to a POSIXish system to port Hamlib. Contact us for help. That is, if you want to take part in the development of Hamlib, you'll need the following tools. Make sure you have at least the required version or you won't even be able to build from the Git clone. N.B. The Debian and derivatives (Ubuntu and friends) 'build-essentials' package will install a number of tools and minimize the number of packages that need to be installed manually (Debian package names are listed, other distributions may differ). * Gnu C or any C99 compliant compiler # gcc --version * Gnu make (or any modern one, BSD okay) # make --version * autoconf 2.59 # autoconf --version * automake 1.7 # automake --version * libtool 2.2.6b # libtool --version * libltdl-dev 2.2.6b * Git for connection to hamlib.git.sourceforge.net N.B. Hamlib requires libtool >= 2.2.6b in compliance with CVE-2009-3736. Optional, but highly recommended: * GNU C++ # g++ --version * swig (for bindings) 1.3.14 # swig -version * perl devel # h2xs * tcl devel # tcltk-depends * python devel # python-config * libxml2 devel # xml2-config --version * libgd2 devel # gdlib-config --version * libusb devel # libusb-config --version (not 1.0.0!) * RPC devel (libc-dev) # rpcgen --version N.B The libusb package is required for building most of the 'kit' backend. The older version is needed, not 1.0.0 or higher. Debian and derivatives package libusb 0.1.12 which is what is needed. Documentation: * Doxygen N.B.: Some systems can have several versions of the autotools installed. In that case, autoconf may be called "autoconf2.50", autoheader "autoheader2.50", and automake "automake-1.7", aclocal "aclocal-1.7" or a newer version. IMPORTANT: If autoconf or automake are installed on your system, make sure they are matching *at least* the version shown above. Some people experience troubles with automake 1.5, if you're one of those, it's recommended to upgrade to automake 1.7, which is a lot more stable. 1.3. configure and build stage It is important to note that the Git repository holds no autogenerated files, i.e. configure, config.guess, Makefile, etc. Hence after a fresh checkout, you'll have to generate those files. To proceed, first edit the autogen.sh script, and set appropriately the AUTOCONF, AUTOHEADER, AUTOHEADER, and ACLOCAL variables with the required versions seen in the previous section (most systems will be fine with the default names, only do this if a problem arises). cd hamlib sh ./autogen.sh --disable-static --prefix=/usr/local CFLAGS="-g -O0" make make install If you don't want the build files cluttering the source directories, do the following in the same parent directory of hamlib: mkdir build && cd build sh ../hamlib/autogen.sh --disable-static --prefix=/usr/local CFLAGS="-g -O0" make make install This will keep the binary output files seperate from the source tree and aid in development by reducing clutter in the source tree. Once you've run `autogen.sh', make sure you've got some recent config.guess and config.sub (needed to guess your system type). Anything of at least year 2004 should be fine, unless you run some exotic hardware/software system: ./config.guess --version ./config.sub --version The '--prefix' option to `autogen.sh' is optional. Convention is that locally built packages be installed in /usr/local away from distribution installed packages. The '--disable-static' and 'CFLAGS="-g -O0"' speeds up compilation if you don't plan to use static libraries and can bear less optimized binaries while the '-g' option adds debugging info which can be changed to -ggdb to generate debugging info for gdb. Additionally, you may want to add the '--with-perl-binding' or '--with-python-binding' or '--enable-tcl-binding' if you are interested in Swig binding support for those scripting languages. NOTE: The autogen.sh script has only to be run the first time after a fresh checkout or when a Makefile.am or other build file is modified or added. The difference between building as a beta tester and a developer is in the '--enable-maintainer-mode' option passed to configure from autogen.sh. This option will add new Makefile targets and dependencies and not force a rebuild of the Makefiles when make is executed. This is why we recommend that beta testers use the daily Git master branch snapshot from: http://n0nb.users.sourceforge.net For a Tcl build, add this if needed: --with-tcl=/usr/lib/tcl8.2 Note: C-shell users may have to run autogen.sh and make through a bourne shell instead, or pass "SHELL=bash" as a parameter to make. NOTE! If Hamlib has not been previously installed as a locally built package you will need to make sure that `ldconfig' is configured correctly and run periodically after `make install'. Most modern distributions have an /etc/ld.so.conf.d/ directory where local configuration can be made. Later versions of Debian and derivatives have a file named 'libc.conf' in this directory. The contents of libc.conf are: # libc default configuration /usr/local/lib If your system does not have such a file, one will need to be created and then `ldconfig' will need to be run as the root user so that applications using the Hamlib libraries can find them. 1.4. Feedback The Hamlib team is very interested to hear from you, how Hamlib builds and works on your system, especially on non-Linux or non-PC systems. We are trying to make Hamlib as portable as possible. Please report problems to our developer mailing list, hamlib-developer@lists.sourceforge.net Patches are welcome too! Just send them to the mailing list. Git formatted patches are preferred. Unified diff format (diff -u) is also welcome. Patches should apply to the current Git master branch or a testing branch, if possible. If you're patching against an older released version of Hamlib, we can take those as well but please document the release the diff is generated against. So far, Hamlib has been tested successfully under the following systems: (if your system is not present, please report to the mailing list) * Debian i386 (plus derivatives--Ubuntu, etc.) * Debian sid mipsel * RedHat i386 * Linux ppc * Slackware i386 * FreeBSD & NetBSD * Solaris 2.6 * Mac OS X * win32: Cygwin, Mingw 2. How to add a new backend The rule is one backend per protocol family. Try to share code between rigs of the same family, if applicable. 2.1. mkdir mybackend Create a new subdir, of the name of the protocol backend. NB: the directory MUST be the same as the backend name. 2.2. Add to the DIST_SUBDIRS variable in the topdir Makefile.am 2.3. Add the backend name to the BACKEND_LIST variable (add to ROT_BACKEND_LIST for a new rotor backend) in configure.ac.ltv1 and configure.ac.ltv2 (configure.ac is deprecated at the moment). 2.4. Add "mybackend/Makefile" in the AC_CONFIG_FILES macro at the bottom of configure.ac.ltv1 and configure.ac.ltv2 (configure.ac is deprecated at the moment) 2.5. Create mybackend/Makefile.am, mybackend.c mybackend.h Use 'dummy' backend as a template. Here are commands for the bourne shell: $ automake mybackend/Makefile $ CONFIG_HEADERS= CONFIG_LINKS= CONFIG_FILES=mybackend/Makefile ./config.status make in topdir to rebuild all 2.6. Commit your work to your local repository. (developer access to Hamlib Git required for pushing to the canonical Hamlib repository (origin)) Provide patches to the mailing list: (Please let N0NB know if the commands below are incorrect) $ git status # Show uncommitted/staged/unstaged files $ git add mybackend $ cd mybackend (The following command might not be necessary) $ git add Makefile.am mybackend.c mybackend.h While specifying each file individually as above allows for fine- grained control, git offers a wildcard shortcut to add all new files: $ git add . Be careful! If you have other files that were created as part of the build process, this command will add them too unless they match a pattern in .gitignore. Always check with 'git status' first! $ git commit -m "Initial release" Makefile.am mybackend.c mybackend.h Note: The `-m' switch passes a short message to the Git repository upon a commit. If a longer message is desired, do not use the `-m' option. The editor specified in the EDITOR or VISUAL environment variables will be started where a more detailed message may be composed. 2.7 If you have developer access to the Git repository hosted at Source Forge, you can do the following: $ git push origin Your changes will now be available to others. 3. How to add a new model to an existing backend 3.1. make sure there's already a (unique) ID for the model to be added in include/hamlib/riglist.h 3.2. locate the existing backend 3.3. Clone the most similar model in the backend 3.4. Add the new C file to the _SOURCES variable of the backend's Makefile.am 3.5. Add "extern const struct rig_caps _caps;" to mybackend.h 3.6. In initrigs_ of mybackend.c, add "rig_register(&_caps);" 3.7. Run `make' if you have dependencies, or the following to regenerate the makefile: $ automake mybackend/Makefile $ CONFIG_HEADERS= CONFIG_LINKS= CONFIG_FILES=mybackend/Makefile ./config.status Run `make' in topdir to rebuild all. 3.8. Commit your work (once tests are satisfactory): $ svn add mybackend/mymodel.c $ svn commit -m "added to " Makefile.am mybackend.c mybackend.h mymodel.c Note: See Note in section 2.6 above. 4. Read README.betatester to test the new backend/model. Report to mailing list. 5. Basic functions: set/get_freq, set/get_mode, and set/get_vfo would be a good starting point for your new backend. 6. C code examples. A C code snippet to connect to a FT847 and set the frequency of the main VFO to 439,700,000 Hz, using FM as the required mode, would look something like this. The error checking is removed for simplicity. See tests/testrig.c 7. Where are the GUI's? "Build it and they will come ..." Seriously, I am hoping the API's will provide a solid framework for some cool GUI development. I would like to see some GTK or Qt apps that use the hamlib API's so they can be used by end users as a nice part of the Ham shack. Starting points (not exhaustive): Fldigi, CQRlog, gmfsk, gpredict, grig, klog, kontakt, ktrack, xlog 8. Contributing code 8.1 License Contributed code to the Hamlib frontend must be released under the LGPL. Contributed code to Hamlib backends must follow backend current license. Needless to say, the LGPL is the license of choice. End user applications like rigctl, rotctl and RPC daemons should be released under the GPL, so any contributed code must follow the license. 8.2 Coding guidelines and style Try to keep current style of existing code. Improvements are welcome though. When in doubt, follow the Linux kernel coding style guide: http://www.kernel.org/doc/Documentation/CodingStyle Hamlib is a code base from many contributors and a variety of styles have been employed. If you work on a source file, go ahead and apply good judgment and clean it up per the kernel style guide. Lining things up nicely with 8 space tabs (use tabs, not spaces) is an excellent start. Next, put spaces in assignments to aid readability. Align closing braces with the opening block's keyword. In function definitions put the opening brace on its own line under the definition's parameter line. Hamlib source code is no place for an entry into the obsfucated C contest! Many of us are hobbyists and write this for fun. Easy to read and understand logic is preferred over a clever solution. If your solution must be written in a clever fashion, please document it well in your comments. Any header files included from the hamlib/ directory should be enclosed in <>: #include # Per GNU GCC documentation Other included header files (backend and rig specific headers) should be enclosed in "": #include "yaesu.h" Contributed code should always keep the source base in a compilable state, and not regress unless stated otherwise. There's no need to tag the source in a patch with your name in comments behind each modification, we already know the culprit from commit logs (also see "git blame"). :-) Patches should take portability issues into account. Keep in mind Hamlib has to run under: * various Linux's * NetBSD, FreeBSD * MacOS X * Windows: MinGW/Cygwin, and VisualC++ support for rig.h Hamlib should also compile with the following common compilers: * gcc-2.9x (most likely deprecated) * gcc-3.0 and gcc-3.2+ (nearly deprecated?) * gcc-4.x and newer * in shared and static * C++ compiler against rig.h, riglist.h, rotator.h Portability issues to watch: * little vs. big endian systems (use shifts or adhoc functions) * 64 bit int: avoid them in API * printf/scanf of 64bit int: use PRIll and SCNll * printf/scanf of freq_t: use PRIfreq and SCNfreq 8.2.1 Use of rig_debug() function Hamlib provides a debugging aid in the form of the rig_debug() function, It is essentially a wrapper around printf() and takes many of the same flags and conversion specifiers as the C library's various printf() functions. It adds an additional parameter for specifying the desired debug level for the output string. Six levels of debugging are defined in include/hamlib/rig.h and they are: NONE No bug reporting BUG Serious bug ERR Error case (e.g. protocol, memory allocation) WARN Warning VERBOSE Verbose TRACE Tracing They correspond to the use of the -v switch (from no -v switch to -vvvvv) to rigctl's command line. Hamlib applications can also set the debug level via the Hamlib API. From an application's perspective, setting a specific level includes all messages at that level and all at any lower level. In the library, passing RIG_DEBUG_ERR to rig_debug() limits display of that message to a level setting of ERR or BUG. Use of a given level can show the value of a critical variable without the need of a TRACE level message which can get lost in the stream of output produced by low-level Hamlib functions. Here are my (N0NB's) suggested use of rig_debug() levels in backends. * Many backend functions should have an initial call to rig_debug() as follows: rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); The use of RIG_DEBUG_VERBOSE allows tracking the chain of function calls through the backend while still keeping rigctl's output mostly uncluttered by use of the -vvvv switch. * Developers will want to call rig_debug() to display values of critical variable(s) in a backend function. For this RIG_DEBUG_VERBOSE should be a good choice as the output won't be lost in the stream of RIG_DEBUG_TRACE level output by various low-level Hamlib functions (rigctl -vvvv). It will also match the display of the values of critical variable(s) with the function calls as above. * Use RIG_DEBUG_TRACE when it makes sense to see the variable(s) in the context of a lot of low-level debugging output (rigctl -vvvvv). * Lower levels (BUG, ERR, and WARN) should be used where it makes sense that information be printed when the user selects less verbosity. Use sparingly. Many backends do not conform to this suggestion at the moment. The use of the RIG_DEBUG_LEVEL values has been somewhat haphazard (at least by this scribe) so fixing these when working in a given backend is encouraged. If an application sets the debugging level to RIG_DEBUG_NONE, then rig_debug() functions will produce no output. Therefore rig_debug() cannot be counted on to output a message in all runtime cases. 8.3 Submitting patches Git provides tools to generate patches and submit them to the Hamlib developers via email. Use of these tools is preferred as Git allows credit to be given to the author and submitter of the patches. Alternately, patches can be submitted in unified format (diff -u), against the Git master branch or a given release (please note well which one!). Both formats make patches easily readable. The patches are to be sent to the hamlib-developer mailing list ( hamlib-developer@lists.sourceforge.net). If the file is too big, you can send it as a compressed attachment. 8.3.1 Changelog Simply summarize your changes when the files are committed to Git or, if providing patches to the mailing list, provide a summary so the uploader can include it in the commit message which will show in the commit log (Git formatted emails will inlcude this already). 8.4 Git commit access Generally, volunteers can get commit access to the SourceForge Hamlib Git repository upon asking one of the project administrators. Sometimes we'll ask you! However, before your start committing, the project admins would like first to have a look at your "style", just to make sure you grok the Hamlib approach (c.f. previous section on submitting a patch). Then you'll be able to commit by yourself to the backend you chose to maintain. Please follow the rules hereunder: * Always keep the Git repository (all branches) in a compilable state. * Follow the coding guidelines * Touching the frontend (files in src/ and include/hamlib) always requires discussion beforehand on the hamlib-developer list. * Announce on the hamlib-developer list if you're about to do serious maintainance work Thanks for contributing and have fun! Stephane Fillod f8cfe and The Hamlib Group