/* * Hamlib CI-V backend - description of IC-9100 (HF/VHF/UHF All-Mode Tranceiver) * Copyright (c) 2000-2011 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "icom.h" #include "icom_defs.h" #include "frame.h" #include "idx_builtin.h" #include "bandplan.h" #define IC7100_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|\ RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|\ RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTAM|RIG_MODE_PKTFM) #define IC7100_OTHER_TX_MODES ((IC7100_MODES) & ~(RIG_MODE_AM|RIG_MODE_PKTAM)) #define IC7100_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM) #define IC7100_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM|RIG_SCAN_SLCT|RIG_SCAN_PRIO) #define IC7100_VFO_OPS (RIG_OP_FROM_VFO| \ RIG_OP_TO_VFO| \ RIG_OP_CPY| \ RIG_OP_MCL| \ RIG_OP_XCHG| \ RIG_OP_TUNE) #define IC7100_FUNC_ALL (RIG_FUNC_NB| \ RIG_FUNC_NR| \ RIG_FUNC_ANF| \ RIG_FUNC_TONE| \ RIG_FUNC_TSQL| \ RIG_FUNC_COMP| \ RIG_FUNC_VOX| \ RIG_FUNC_FBKIN| \ RIG_FUNC_AFC| \ RIG_FUNC_SATMODE| \ RIG_FUNC_VSC| \ RIG_FUNC_MN| \ RIG_FUNC_LOCK| \ RIG_FUNC_SCOPE| \ RIG_FUNC_TUNER) #define IC7100_LEVEL_ALL (RIG_LEVEL_AF| \ RIG_LEVEL_RF| \ RIG_LEVEL_SQL| \ RIG_LEVEL_IF| \ RIG_LEVEL_NR| \ RIG_LEVEL_CWPITCH| \ RIG_LEVEL_RFPOWER| \ RIG_LEVEL_MICGAIN| \ RIG_LEVEL_KEYSPD| \ RIG_LEVEL_COMP| \ RIG_LEVEL_VOXGAIN| \ RIG_LEVEL_VOXDELAY| \ RIG_LEVEL_ANTIVOX| \ RIG_LEVEL_APF| \ RIG_LEVEL_AGC| \ RIG_LEVEL_PBT_IN| \ RIG_LEVEL_PBT_OUT| \ RIG_LEVEL_NOTCHF_RAW| \ RIG_LEVEL_ATT| \ RIG_LEVEL_PREAMP| \ RIG_LEVEL_RAWSTR| \ RIG_LEVEL_STRENGTH| \ RIG_LEVEL_SWR| \ RIG_LEVEL_ALC| \ RIG_LEVEL_RFPOWER_METER| \ RIG_LEVEL_COMP_METER| \ RIG_LEVEL_VD_METER| \ RIG_LEVEL_ID_METER| \ RIG_LEVEL_MONITOR_GAIN| \ RIG_LEVEL_NB) #define IC7100_PARM_ALL (RIG_PARM_ANN|RIG_PARM_BACKLIGHT) // IC-7100 S-meter calibration data based on manual #define IC7100_STR_CAL { 14, \ { \ { 0, -54 }, \ { 120, 0 }, \ { 241, 60 } \ } } #define IC7100_SWR_CAL { 5, \ { \ { 0, 1.0f }, \ { 48, 1.5f }, \ { 80, 2.0f }, \ { 120, 3.0f }, \ { 240, 6.0f } \ } } #define IC7100_ALC_CAL { 2, \ { \ { 0, 0.0f }, \ { 120, 1.0f } \ } } #define IC7100_RFPOWER_METER_CAL { 3, \ { \ { 0, 0.0f }, \ { 143, 0.5f }, \ { 213, 1.0f } \ } } #define IC7100_COMP_METER_CAL { 3, \ { \ { 0, 0.0f }, \ { 130, 15.0f }, \ { 241, 30.0f } \ } } #define IC7100_VD_METER_CAL { 3, \ { \ { 0, 0.0f }, \ { 13, 10.0f }, \ { 241, 16.0f } \ } } #define IC7100_ID_METER_CAL { 4, \ { \ { 0, 0.0f }, \ { 97, 10.0f }, \ { 146, 15.0f }, \ { 241, 25.0f } \ } } #define IC7100_HF_ANTS (RIG_ANT_1|RIG_ANT_2) int ic7100_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val); int ic7100_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val); /* * IC-7100 rig capabilities. */ static const struct icom_priv_caps ic7100_priv_caps = { 0x88, /* default address */ 0, /* 731 mode */ 0, /* no XCHG */ ic7100_ts_sc_list, /* FIXME */ .agc_levels_present = 1, .agc_levels = { { .level = RIG_AGC_FAST, .icom_level = 1 }, { .level = RIG_AGC_MEDIUM, .icom_level = 2 }, { .level = RIG_AGC_SLOW, .icom_level = 3 }, { .level = -1, .icom_level = 0 }, }, }; const struct rig_caps ic7100_caps = { .rig_model = RIG_MODEL_IC7100, .model_name = "IC-7100", .mfg_name = "Icom", .version = BACKEND_VER ".0", .copyright = "LGPL", .status = RIG_STATUS_UNTESTED, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = IC7100_FUNC_ALL, .has_set_func = IC7100_FUNC_ALL | RIG_FUNC_RESUME, .has_get_level = IC7100_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC7100_LEVEL_ALL), .has_get_parm = IC7100_PARM_ALL, .has_set_parm = IC7100_PARM_ALL, .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, [LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } }, [LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } }, [LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } }, }, .parm_gran = {}, .ctcss_list = common_ctcss_list, .dcs_list = common_dcs_list, .preamp = {20, RIG_DBLST_END, }, .attenuator = {20, RIG_DBLST_END, }, .max_rit = kHz(9.999), .max_xit = kHz(9.999), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC7100_VFO_OPS, .scan_ops = IC7100_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 9, /* TODO */ .chan_list = { /* TBC */ { 1, 396, RIG_MTYPE_MEM }, { 397, 400, RIG_MTYPE_CALL }, { 401, 424, RIG_MTYPE_EDGE }, RIG_CHAN_END, }, .rx_range_list1 = { /* Europe */ {kHz(30), MHz(60), IC7100_MODES, -1, -1, IC7100_VFO_ALL, IC7100_HF_ANTS}, {kHz(136), MHz(174), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_3}, {MHz(420), MHz(480), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_4}, {MHz(1240), MHz(1320), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_5}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS), FRQ_RNG_HF(1, RIG_MODE_AM, W(2), W(25), IC7100_VFO_ALL, IC7100_HF_ANTS), /* only HF */ FRQ_RNG_6m(1, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS), FRQ_RNG_2m(1, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, RIG_ANT_3), FRQ_RNG_70cm(1, IC7100_OTHER_TX_MODES, W(2), W(75), IC7100_VFO_ALL, RIG_ANT_4), /* option */ FRQ_RNG_23cm_REGION1(IC7100_OTHER_TX_MODES, W(1), W(10), IC7100_VFO_ALL, RIG_ANT_5), RIG_FRNG_END, }, .rx_range_list2 = { /* USA */ {kHz(30), MHz(60), IC7100_MODES, -1, -1, IC7100_VFO_ALL, IC7100_HF_ANTS}, {kHz(136), MHz(174), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_3}, {MHz(420), MHz(480), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_4}, {MHz(1240), MHz(1320), IC7100_MODES, -1, -1, IC7100_VFO_ALL, RIG_ANT_5}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS), FRQ_RNG_HF(2, RIG_MODE_AM, W(2), W(25), IC7100_VFO_ALL, IC7100_HF_ANTS), /* only HF */ /* USA only, TBC: end of range and modes */ {MHz(5.255), MHz(5.405), IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS}, /* USA only */ {MHz(5.255), MHz(5.405), RIG_MODE_AM, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS}, /* USA only */ FRQ_RNG_6m(2, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, IC7100_HF_ANTS), FRQ_RNG_2m(2, IC7100_OTHER_TX_MODES, W(2), W(100), IC7100_VFO_ALL, RIG_ANT_3), FRQ_RNG_70cm(2, IC7100_OTHER_TX_MODES, W(2), W(75), IC7100_VFO_ALL, RIG_ANT_4), /* option */ FRQ_RNG_23cm_REGION2(IC7100_OTHER_TX_MODES, W(1), W(10), IC7100_VFO_ALL, RIG_ANT_5), RIG_FRNG_END, }, .tuning_steps = { {RIG_MODE_SSB | RIG_MODE_CW, 1}, {RIG_MODE_SSB | RIG_MODE_CW, 10}, {RIG_MODE_SSB | RIG_MODE_CW, 50}, {RIG_MODE_SSB | RIG_MODE_CW, 100}, {RIG_MODE_FM, kHz(0.1)}, {RIG_MODE_FM, kHz(5)}, {RIG_MODE_FM, kHz(6.25)}, {RIG_MODE_FM, kHz(10)}, {RIG_MODE_FM, kHz(12.5)}, {RIG_MODE_FM, kHz(20)}, {RIG_MODE_FM, kHz(25)}, {RIG_MODE_FM, kHz(100)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(2.4)}, {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(1.8)}, {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(3)}, {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(10)}, {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(15)}, {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(7)}, {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(500)}, {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, Hz(250)}, {RIG_MODE_CW | RIG_MODE_CWR, kHz(1.2)}, {RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)}, {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(6)}, {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(3)}, {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(9)}, RIG_FLT_END, }, .str_cal = IC7100_STR_CAL, .swr_cal = IC7100_SWR_CAL, .alc_cal = IC7100_ALC_CAL, .rfpower_meter_cal = IC7100_RFPOWER_METER_CAL, .comp_meter_cal = IC7100_COMP_METER_CAL, .vd_meter_cal = IC7100_VD_METER_CAL, .id_meter_cal = IC7100_ID_METER_CAL, .priv = (void *)& ic7100_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = NULL, .rig_close = NULL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .get_freq = icom_get_freq, .set_freq = icom_set_freq, .get_mode = icom_get_mode_with_data, .set_mode = icom_set_mode_with_data, .get_vfo = NULL, .set_vfo = icom_set_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .get_ts = icom_get_ts, .set_ts = icom_set_ts, .get_func = icom_get_func, .set_func = icom_set_func, .get_level = ic7100_get_level, .set_level = ic7100_set_level, .set_ptt = icom_set_ptt, .get_ptt = icom_get_ptt, .set_rit = icom_set_rit, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_dcs_sql = icom_set_dcs_code, .get_dcs_sql = icom_get_dcs_code, .set_parm = icom_set_parm, .get_parm = icom_get_parm, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .get_dcd = icom_get_dcd, .decode_event = icom_decode_event, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_get_split_vfo, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_powerstat = icom_set_powerstat, .get_powerstat = icom_get_powerstat, .send_morse = icom_send_morse }; int ic7100_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val) { unsigned char cmdbuf[MAXFRAMELEN]; rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (level) { case RIG_LEVEL_VOXDELAY: cmdbuf[0] = 0x01; cmdbuf[1] = 0x65; return icom_set_level_raw(rig, level, C_CTL_MEM, 0x05, 2, cmdbuf, 1, val); default: return icom_set_level(rig, vfo, level, val); } } int ic7100_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val) { unsigned char cmdbuf[MAXFRAMELEN]; rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (level) { case RIG_LEVEL_VOXDELAY: cmdbuf[0] = 0x01; cmdbuf[1] = 0x65; return icom_get_level_raw(rig, level, C_CTL_MEM, 0x05, 2, cmdbuf, val); default: return icom_get_level(rig, vfo, level, val); } }