/* * Hamlib CI-V backend - description of IC-718 caps * Copyright (c) 2000-2010 by Stephane Fillod * Caps submitted by Chuck Gilkes WD0FCL/4 * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include "hamlib/rig.h" #include "icom.h" #include "idx_builtin.h" #include "bandplan.h" #define IC718_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR) #define IC718_1MHZ_TS_MODES (RIG_MODE_AM) #define IC718_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR) /* tx doesn't have WFM. * 100W in all modes but AM (40W) */ #define IC718_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR) #define IC718_AM_TX_MODES (RIG_MODE_AM) #define IC718_FUNC_ALL (RIG_FUNC_NR|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_ANF) #define IC718_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_MICGAIN|RIG_LEVEL_NR|RIG_LEVEL_CWPITCH|RIG_LEVEL_KEYSPD|RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_RAWSTR|RIG_LEVEL_SQL) #define IC718_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM) #define IC718_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL) #define IC718_SCAN_OPS (RIG_SCAN_MEM) /* * TODO: check whether func and levels are stored in memory */ #define IC718_MEM_CAP { \ .freq = 1, \ .mode = 1, \ .width = 1, \ .tx_freq = 1, \ .tx_mode = 1, \ .tx_width = 1, \ } #define IC718_STR_CAL UNKNOWN_IC_STR_CAL static const struct icom_priv_caps IC718_priv_caps = { 0x5e, /* default address */ 0, /* 731 mode */ 0, /* no XCHG */ ic718_ts_sc_list }; const struct rig_caps ic718_caps = { .rig_model = RIG_MODEL_IC718, .model_name = "IC-718", .mfg_name = "Icom", .version = BACKEND_VER ".1", .copyright = "LGPL", .status = RIG_STATUS_BETA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_NONE, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = IC718_FUNC_ALL, .has_set_func = IC718_FUNC_ALL, .has_get_level = IC718_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC718_LEVEL_ALL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .str_cal = IC718_STR_CAL, .ctcss_list = NULL, .dcs_list = NULL, .preamp = { 10, RIG_DBLST_END, }, .attenuator = { 20, RIG_DBLST_END, }, .max_rit = Hz(0), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC718_VFO_OPS, .scan_ops = IC718_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 99, RIG_MTYPE_MEM, IC718_MEM_CAP }, { 100, 101, RIG_MTYPE_EDGE, IC718_MEM_CAP }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30), MHz(30) - 1, IC718_ALL_RX_MODES, -1, -1, IC718_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1, IC718_OTHER_TX_MODES, W(5), W(100), IC718_VFO_ALL, RIG_ANT_1), FRQ_RNG_HF(1, IC718_AM_TX_MODES, W(2), W(40), IC718_VFO_ALL, RIG_ANT_1), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30), MHz(30) - 1, IC718_ALL_RX_MODES, -1, -1, IC718_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2, IC718_OTHER_TX_MODES, W(5), W(100), IC718_VFO_ALL, RIG_ANT_1), FRQ_RNG_HF(2, IC718_AM_TX_MODES, W(2), W(40), IC718_VFO_ALL, RIG_ANT_1), /* AM class */ RIG_FRNG_END, }, .tuning_steps = { {IC718_1HZ_TS_MODES, 1}, {IC718_ALL_RX_MODES, 10}, {IC718_ALL_RX_MODES, 100}, {IC718_ALL_RX_MODES, kHz(1)}, {IC718_ALL_RX_MODES, kHz(5)}, {IC718_ALL_RX_MODES, kHz(9)}, {IC718_ALL_RX_MODES, kHz(10)}, {IC718_ALL_RX_MODES, kHz(100)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.1)}, /* bultin */ {RIG_MODE_CW | RIG_MODE_RTTY, Hz(500)}, /* FL-52A */ {RIG_MODE_CW | RIG_MODE_RTTY, Hz(250)}, /* FL-53A */ {RIG_MODE_SSB, kHz(2.8)}, /* FL-96 */ {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(1.8)}, /* FL-222 */ {RIG_MODE_AM, kHz(6)}, /* mid w/ bultin FL-94 */ {RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */ RIG_FLT_END, }, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void *)& IC718_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = NULL, .rig_close = NULL, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .decode_event = icom_decode_event, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .get_dcd = icom_get_dcd, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_mem_get_split_vfo, };