/* * Hamlib CI-V backend - description of IC-R8600 * Copyright (c) 2000-2004 by Stephane Fillod * Copyright (c) 2018 by Ekki Plicht * Copyright (c) 2019 by Malcolm Herring * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "hamlib/rig.h" #include "misc.h" #include "idx_builtin.h" #include "icom.h" #include "icom_defs.h" #include "frame.h" #define ICR8600_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_RTTY|\ RIG_MODE_FM|RIG_MODE_WFM|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_SAM|RIG_MODE_SAL|\ RIG_MODE_SAH|RIG_MODE_P25|RIG_MODE_DSTAR|RIG_MODE_DPMR|RIG_MODE_NXDNVN|\ RIG_MODE_NXDN_N|RIG_MODE_DCR) #define ICR8600_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_ANF|RIG_FUNC_MN|RIG_FUNC_AFC|\ RIG_FUNC_NR|RIG_FUNC_AIP|RIG_FUNC_LOCK|RIG_FUNC_VSC|RIG_FUNC_RESUME|RIG_FUNC_TSQL|\ RIG_FUNC_CSQL|RIG_FUNC_DSQL) #define ICR8600_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|\ RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_PREAMP|\ RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH) #define ICR8600_PARM_ALL (RIG_PARM_ANN|RIG_PARM_BACKLIGHT|\ RIG_PARM_BEEP|RIG_PARM_TIME|RIG_PARM_KEYLIGHT) #define ICR8600_VFO_ALL (RIG_VFO_VFO|RIG_VFO_MEM) #define ICR8600_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL) #define ICR8600_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|\ RIG_SCAN_PRIO|RIG_SCAN_PRIO|RIG_SCAN_DELTA|RIG_SCAN_STOP) #define ICR8600_ANTS_HF (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3) #define ICR8600_ANTS_VHF (RIG_ANT_1) #define ICR8600_STR_CAL { 2, {\ { 0, -60 }, \ { 255, 60 }, \ } } /* * channel caps. */ #define ICR8600_MEM_CAP { \ .freq = 1, \ .mode = 1, \ .width = 1, \ .ant = 1, \ .levels = RIG_LEVEL_ATT|RIG_LEVEL_PREAMP, \ .channel_desc = 1, \ .flags = 1, \ } int icr8600_set_parm(RIG *rig, setting_t parm, value_t val); int icr8600_get_parm(RIG *rig, setting_t parm, value_t *val); static const struct icom_priv_caps icr8600_priv_caps = { 0x96, /* default address */ 0, /* 731 mode */ 0, /* no XCHG */ r8600_ts_sc_list, /* list of tuning steps */ .offs_len = 4, /* Repeater offset is 4 bytes */ .serial_USB_echo_check = 1 /* USB CI-V may not echo */ }; const struct rig_caps icr8600_caps = { .rig_model = RIG_MODEL_ICR8600, .model_name = "IC-R8600", .mfg_name = "Icom", .version = "0.8", .copyright = "LGPL", .status = RIG_STATUS_ALPHA, .rig_type = RIG_TYPE_RECEIVER, .ptt_type = RIG_PTT_NONE, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, // USB can do up to 115000 .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 1, .timeout = 1000, .retry = 3, .has_get_func = ICR8600_FUNC_ALL, .has_set_func = ICR8600_FUNC_ALL, .has_get_level = ICR8600_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(ICR8600_LEVEL_ALL), .has_get_parm = ICR8600_PARM_ALL, .has_set_parm = RIG_PARM_SET(ICR8600_PARM_ALL), .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } } }, .parm_gran = { [PARM_TIME] = { .min = { .i = 0 }, .max = { .i = 86399} } }, .ctcss_list = common_ctcss_list, .dcs_list = common_dcs_list, .preamp = { 20, RIG_DBLST_END, }, /* 20 on HF, 14 on VHF, UHF, same setting */ .attenuator = { 10, 20, 30, RIG_DBLST_END, }, .max_rit = Hz(0), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = ICR8600_VFO_OPS, .scan_ops = ICR8600_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 100, .chan_desc_sz = 16, .chan_list = { { 0, 99, RIG_MTYPE_MEM, ICR8600_MEM_CAP }, { 0, 99, RIG_MTYPE_EDGE, ICR8600_MEM_CAP }, /* to be extended */ RIG_CHAN_END, }, .rx_range_list1 = { { kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF }, { kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF }, RIG_FRNG_END, }, .tx_range_list1 = { RIG_FRNG_END, }, .rx_range_list2 = { { kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF }, { kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF }, RIG_FRNG_END, }, .tx_range_list2 = { RIG_FRNG_END, }, .tuning_steps = { {ICR8600_MODES, Hz(100)}, {ICR8600_MODES, kHz(1)}, {ICR8600_MODES, kHz(2.5)}, {ICR8600_MODES, kHz(3.125)}, {ICR8600_MODES, kHz(5)}, {ICR8600_MODES, kHz(6.25)}, {ICR8600_MODES, kHz(8.33)}, {ICR8600_MODES, kHz(9)}, {ICR8600_MODES, kHz(10)}, {ICR8600_MODES, kHz(12.5)}, {ICR8600_MODES, kHz(20)}, {ICR8600_MODES, kHz(25)}, {ICR8600_MODES, kHz(100)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)}, {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(1.9)}, {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(6)}, {RIG_MODE_AM | RIG_MODE_AMS, kHz(6)}, {RIG_MODE_AM | RIG_MODE_AMS, kHz(2.4)}, {RIG_MODE_AM | RIG_MODE_AMS, kHz(15)}, {RIG_MODE_FM, kHz(15)}, {RIG_MODE_FM, kHz(6)}, RIG_FLT_END, }, .str_cal = ICR8600_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void *)& icr8600_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = icom_rig_open, .rig_close = NULL, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .set_bank = icom_set_bank, .get_rptr_offs = icom_get_rptr_offs, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_shift = icom_set_rptr_shift, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .decode_event = icom_decode_event, .set_func = icom_set_func, .get_func = icom_get_func, .set_level = icom_set_level, .get_level = icom_get_level, .set_parm = icr8600_set_parm, .get_parm = icr8600_get_parm, .get_dcd = icom_get_dcd, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_dcs_sql = icom_set_dcs_sql, .get_dcs_sql = icom_get_dcs_sql, }; int icr8600_set_parm(RIG *rig, setting_t parm, value_t val) { unsigned char parmbuf[MAXFRAMELEN]; rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (parm) { case RIG_PARM_BEEP: parmbuf[0] = 0x00; parmbuf[1] = 0x38; return icom_set_custom_parm(rig, 2, parmbuf, 1, val.i ? 1 : 0); case RIG_PARM_BACKLIGHT: parmbuf[0] = 0x01; parmbuf[1] = 0x15; return icom_set_custom_parm(rig, 2, parmbuf, 2, (int)(val.f * 255.0f)); case RIG_PARM_KEYLIGHT: parmbuf[0] = 0x01; parmbuf[1] = 0x16; return icom_set_custom_parm(rig, 2, parmbuf, 2, val.f != 0 ? 255 : 0); case RIG_PARM_TIME: parmbuf[0] = 0x01; parmbuf[1] = 0x32; return icom_set_custom_parm_time(rig, 2, parmbuf, val.i); default: return icom_set_parm(rig, parm, val); } } int icr8600_get_parm(RIG *rig, setting_t parm, value_t *val) { unsigned char parmbuf[MAXFRAMELEN]; int retval; int icom_val; rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (parm) { case RIG_PARM_BEEP: parmbuf[0] = 0x00; parmbuf[1] = 0x38; retval = icom_get_custom_parm(rig, 2, parmbuf, &icom_val); if (retval != RIG_OK) { return retval; } val->i = icom_val ? 1 : 0; break; case RIG_PARM_BACKLIGHT: parmbuf[0] = 0x01; parmbuf[1] = 0x15; retval = icom_get_custom_parm(rig, 2, parmbuf, &icom_val); if (retval != RIG_OK) { return retval; } val->f = (float) icom_val / 255.0f; break; case RIG_PARM_KEYLIGHT: parmbuf[0] = 0x01; parmbuf[1] = 0x16; retval = icom_get_custom_parm(rig, 2, parmbuf, &icom_val); if (retval != RIG_OK) { return retval; } val->f = icom_val != 0; break; case RIG_PARM_TIME: parmbuf[0] = 0x01; parmbuf[1] = 0x32; return icom_get_custom_parm_time(rig, 2, parmbuf, &val->i); default: return icom_get_parm(rig, parm, val); } return RIG_OK; }