/*
 *  Hamlib AOR backend - SR2200 description
 *
 *  Copyright (c) 2000-2008 by Stephane Fillod
 *
 *  Author: Stefano Speretta, Innovative Solutions In Space BV
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdio.h>
#include <string.h>
#include <hamlib/rig.h>
#include "serial.h"
#include "idx_builtin.h"
#include "misc.h"
#include "aor.h"

#define SR2200_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define SR2200_FUNC_ALL ()

#define SR2200_LEVEL_GET (RIG_LEVEL_ATT | RIG_LEVEL_AGC | RIG_LEVEL_RAWSTR | RIG_LEVEL_AF | RIG_LEVEL_RF )
#define SR2200_LEVEL_SET (RIG_LEVEL_ATT | RIG_LEVEL_AGC | RIG_LEVEL_AF | RIG_LEVEL_RF)

#define SR2200_PARM (RIG_PARM_NONE)

#define SR2200_VFO_OPS (RIG_OP_MCL | RIG_OP_UP | RIG_OP_DOWN)
#define SR2200_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_SLCT)

#define SR2200_VFO (RIG_VFO_A | RIG_VFO_B | RIG_VFO_C | RIG_VFO_N(3) | RIG_VFO_N(4) \
					| RIG_VFO_N(5) | RIG_VFO_N(6) | RIG_VFO_N(7) | RIG_VFO_N(8) \
					| RIG_VFO_N(9))

/*   The data available on http://www.aoruk.com did not match very well on HF */
#define SR2200_STR_CAL { 16, { \
		{   0, -60 }, \
		{   3, -48 }, \
		{  14, -42 }, \
		{  26, -36 }, \
		{  34, -30 }, \
		{  42, -24 }, \
		{  52, -18 }, \
		{  62, -12 }, \
		{  74, -6 }, \
		{  87,  0 }, \
		{ 101, 10 }, \
		{ 117, 20 }, \
		{ 135, 30 }, \
		{ 152, 40 }, \
		{ 202, 50 }, \
		{ 255, 60 }, \
	} }


#define SR2200_MEM_CAP {	\
	.freq = 1,	\
	.mode = 1,	\
	.width = 1,	\
	.bank_num = 1,	\
	.tuning_step = 1,	\
	.channel_desc = 1,	\
	.flags = 1,	\
	.levels = RIG_LEVEL_ATT | RIG_LEVEL_AGC,	\
	.funcs = RIG_FUNC_ABM,    \
}

#define CR '\r'
#define LF '\n'
#define EOM "\r"

#define BUFSZ 256

static int sr2200_set_freq(RIG *rig, vfo_t vfo, freq_t freq);

int parse_s2200_aor_mode(RIG *rig, char aormode, char aorwidth, rmode_t *mode, pbwidth_t *width);

static int sr2200_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len);

int sr2200_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width);
int sr2200_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);

int sr2200_get_vfo(RIG *rig, vfo_t *vfo);
int sr2200_set_vfo(RIG *rig, vfo_t vfo);

int sr2200_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
int sr2200_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);

static const struct aor_priv_caps sr2200_priv_caps = {
    .bank_base1 = '0',
    .bank_base2 = '0',
};

 //	 Derived from AOR AR8200 backend

/*
 * sr2200 rig capabilities.
 * Notice that some rigs share the same functions.
 * Also this struct is READONLY!
 *
 * part of info from http://www.aoruk.com/
 *
 * TODO: retrieve BW info, and rest of commands
 */
const struct rig_caps sr2200_caps = {
    .rig_model =  RIG_MODEL_SR2200,
    .model_name = "SR2200",
    .mfg_name =  "AOR",
    .version =  "0.1",
    .copyright =  "LGPL",
    .status =  RIG_STATUS_BETA,
    .rig_type =  RIG_TYPE_SCANNER,
    .ptt_type =  RIG_PTT_NONE,
    .dcd_type =  RIG_DCD_RIG,
    .port_type =  RIG_PORT_SERIAL,
    .serial_rate_min =  19200,
    .serial_rate_max =  38400,
    .serial_data_bits =  8,
    .serial_stop_bits =  2,
    .serial_parity =  RIG_PARITY_NONE,
    .serial_handshake =  RIG_HANDSHAKE_XONXOFF,
    .write_delay =  0,
    .post_write_delay =  0,
    .timeout =  200,
    .retry =  3,
    .has_get_func =  RIG_FUNC_NONE,
    .has_set_func =  RIG_FUNC_NONE,
    .has_get_level =  SR2200_LEVEL_GET,
    .has_set_level =  SR2200_LEVEL_SET,
    .has_get_parm =  RIG_PARM_NONE,
    .has_set_parm =  RIG_PARM_NONE,    /* FIXME: parms */
    .level_gran =  {},                 /* FIXME: granularity */
    .parm_gran =  {},
    .ctcss_list =  NULL,				/* FIXME: CTCSS list */
    .dcs_list =  NULL,
    .preamp =   { RIG_DBLST_END, },
    .attenuator =   { 10, 20, RIG_DBLST_END, },
    .max_rit =  Hz(0),
    .max_xit =  Hz(0),
    .max_ifshift =  Hz(0),
    .targetable_vfo =  0,
    .transceive =  RIG_TRN_RIG,
    .bank_qty =   10,
    .chan_desc_sz =  8,
    .vfo_ops =  SR2200_VFO_OPS,
    .scan_ops =  SR2200_SCAN_OPS,
    .str_cal = SR2200_STR_CAL,

    .chan_list =  {
	{   0,  999, RIG_MTYPE_MEM, SR2200_MEM_CAP },
        RIG_CHAN_END, },

    .rx_range_list1 =  {
	{MHz(25),MHz(3000),SR2200_MODES,-1,-1,SR2200_VFO},
	RIG_FRNG_END,
	},

    .tx_range_list1 =  { RIG_FRNG_END, },

    .rx_range_list2 =  { RIG_FRNG_END, }, /* rx range */

    .tx_range_list2 =  { RIG_FRNG_END, },	/* no tx range, this is a scanner! */

    .tuning_steps =  {
	{SR2200_MODES,1},
	{SR2200_MODES,100},
	{SR2200_MODES,500},
	{SR2200_MODES,kHz(1)},
	{SR2200_MODES,kHz(2)},
	{SR2200_MODES,kHz(5)},
	{SR2200_MODES,kHz(6.25)},
	{SR2200_MODES,kHz(9)},
	{SR2200_MODES,kHz(10)},
	{SR2200_MODES,kHz(12.5)},
	{SR2200_MODES,kHz(20)},
	{SR2200_MODES,kHz(25)},
	{SR2200_MODES,kHz(30)},
	{SR2200_MODES,kHz(50)},
	{SR2200_MODES,kHz(100)},
#if 0
	{SR2200_MODES,0},	/* any tuning step */
#endif
	RIG_TS_END,
    },
        /* mode/filter list, .remember =  order matters! */
    .filters =  {
	{RIG_MODE_WAM, kHz(15)},
	{RIG_MODE_SFM, kHz(6)},
	{RIG_MODE_AM, kHz(6)},
	{RIG_MODE_FM, kHz(15)},    /* narrow */
	{RIG_MODE_WFM, kHz(3000)}, /*  wide  */
	RIG_FLT_END,
    },

    .priv = (void*)&sr2200_priv_caps,

    .rig_init =  NULL,
    .rig_cleanup =  NULL,
    .rig_open =  NULL,
    .rig_close =  NULL,

    .set_freq =  sr2200_set_freq,
    .get_freq =  aor_get_freq,
    .set_mode =  sr2200_set_mode,
    .get_mode =  sr2200_get_mode,
    .set_vfo =  sr2200_set_vfo,
    .get_vfo =  sr2200_get_vfo,

    .set_level =  sr2200_set_level,
    .get_level =  sr2200_get_level,
    .get_dcd = aor_get_dcd,

    .set_ts =  aor_set_ts,
    .set_powerstat =  aor_set_powerstat,
    .vfo_op =  aor_vfo_op,
    .scan =  aor_scan,
    .get_info =  aor_get_info,

    .set_mem = aor_set_mem,
    .get_mem = aor_get_mem,
    .set_bank = aor_set_bank,

    .set_channel = aor_set_channel,
    .get_channel = aor_get_channel,

    .get_chan_all_cb = aor_get_chan_all_cb,
};

/*
 * Function definitions below
 */


/*
 * modes in use by the "MD" command of SR2200
 */
#define SR2200_FM '0'
#define SR2200_WFM   '1'
#define SR2200_AM '2'
#define SR2200_SFM   '3'
#define SR2200_WAM   '4'

/*
 * sr2200_transaction
 * We assume that rig!=NULL, rig->state!= NULL, data!=NULL, data_len!=NULL
 * Otherwise, you'll get a nice seg fault. You've been warned!
 * return value: RIG_OK if everything's fine, negative value otherwise
 * TODO: error case handling
 */
static int sr2200_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len)
{
	int retval;
	struct rig_state *rs;
	char ackbuf[BUFSZ];
	int ack_len;

	rs = &rig->state;

	serial_flush(&rs->rigport);

	retval = write_block(&rs->rigport, cmd, cmd_len);
	if (retval != RIG_OK)
		return retval;

	if (!data)
		data = ackbuf;
	if (!data_len)
		data_len = &ack_len;

	/*
	 * Do wait for a reply
	 */
	retval = read_string(&rs->rigport, data, BUFSZ, EOM, strlen(EOM));
	if (retval < 0)
		return retval;

	*data_len = retval;

	if (*data_len < BUFSZ)
		data[*data_len] = '\0';
	else
		data[BUFSZ-1] = '\0';

	if (data[0] == '?') {
		/* command failed? resync with radio */
		write_block(&rs->rigport, EOM, 1);

		return -RIG_EPROTO;
	}

	return RIG_OK;
}
/*
 * sr2200_set_freq
 * Assumes rig!=NULL
 */
int sr2200_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
	char freqbuf[BUFSZ],ackbuf[BUFSZ],*rfp;
	int freq_len, ret_freq_len;

	ret_freq_len = BUFSZ;

	if (freq < sr2200_caps.rx_range_list1[0].start) {
		rig_debug(RIG_DEBUG_WARN, "Error in %s: frequency is lower than minimum supported value (%.0f Hz)\n",
				__FUNCTION__, sr2200_caps.rx_range_list1[0].start);
		return -RIG_EPROTO;
	}

		if (freq > sr2200_caps.rx_range_list1[0].end) {
		rig_debug(RIG_DEBUG_WARN, "Error in %s: frequency is higher than maximum supported value (%.0f Hz)\n",
				__FUNCTION__, sr2200_caps.rx_range_list1[0].end);
		return -RIG_EPROTO;
	}

	freq_len = sprintf(freqbuf,"RF%010.0f"EOM, freq);

	strcpy(freqbuf+freq_len, EOM);
	freq_len += strlen(EOM);

	int retval = sr2200_transaction (rig, freqbuf, freq_len, ackbuf, &ret_freq_len);

	if (retval != RIG_OK)
		return retval;

	rfp = strstr(ackbuf, "RF");
	if (!rfp) {
		rig_debug(RIG_DEBUG_WARN, "NO RF in returned string in %s: '%s'\n",
				__FUNCTION__, freqbuf);
		return -RIG_EPROTO;
	}

	sscanf(rfp+2,"%"SCNfreq, &freq);

	return RIG_OK;

}

/*
 * sr2200_set_mode
 * Assumes rig!=NULL
 */
int sr2200_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
	char mdbuf[BUFSZ];
	int mdbuf_len, aormode, retval;

	switch (mode) {
	case RIG_MODE_AM:      	aormode = '2'; break;
	case RIG_MODE_FM:	    aormode = '0'; break;
	case RIG_MODE_WFM:	    aormode = '1'; break;
	case RIG_MODE_SFM:      aormode = '3'; break;
	case RIG_MODE_WAM:		aormode = '4'; break;
	default:
		rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode %d\n",
					__FUNCTION__,mode);
		return -RIG_EINVAL;
	}

	mdbuf_len = sprintf(mdbuf, "MD%c" EOM,	aormode);
	retval = sr2200_transaction (rig, mdbuf, mdbuf_len, NULL, NULL);

	return retval;
}

/*
 * sr2200_get_mode
 * Assumes rig!=NULL, mode!=NULL
 */
int sr2200_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
	char ackbuf[BUFSZ], *mdp;
	int ack_len, retval;

	retval = sr2200_transaction (rig, "MD" EOM, 3, ackbuf, &ack_len);
	if (retval != RIG_OK)
		return retval;

	mdp = strstr(ackbuf, "MD");
	if (!mdp) {
		rig_debug(RIG_DEBUG_ERR, "%s: no MD in returned string: '%s'\n",
				__FUNCTION__, ackbuf);
		return -RIG_EPROTO;
	}

	retval = parse_s2200_aor_mode(rig, mdp[2], mdp[2], mode, width);

	return retval;
}

int parse_s2200_aor_mode(RIG *rig, char aormode, char aorwidth, rmode_t *mode, pbwidth_t *width)
{
    switch (aormode) {
	case SR2200_FM:		*mode = RIG_MODE_FM; break;
	case SR2200_AM:		*mode = RIG_MODE_AM; break;
	case SR2200_SFM:	*mode = RIG_MODE_SFM; break;
	case SR2200_WAM:	*mode = RIG_MODE_WAM; break;
	case SR2200_WFM:	*mode = RIG_MODE_WFM; break;
	default:
	    rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode '%c'\n",
		      __FUNCTION__, aormode);
	    return -RIG_EPROTO;
    }

    switch (aorwidth) {
	case SR2200_FM:		*width = s_kHz(15); break;
	case SR2200_AM:		*width = s_kHz(6); break;
	case SR2200_SFM:	*width = s_kHz(6); break;
	case SR2200_WAM:	*width = s_kHz(15); break;
	case SR2200_WFM:	*width = s_kHz(300); break;
	default:
	    rig_debug(RIG_DEBUG_ERR,"%s: unsupported width %d\n",
		      __FUNCTION__, aorwidth);
	    return -RIG_EPROTO;
    }

    return RIG_OK;
}

/*
 * sr2200_set_vfo
 * Assumes rig!=NULL
 */
int sr2200_set_vfo(RIG *rig, vfo_t vfo)
{
	char *vfocmd;

	switch (vfo) {
	case RIG_VFO_A: vfocmd = "VA" EOM; break;
	case RIG_VFO_B: vfocmd = "VB" EOM; break;
	case RIG_VFO_C: vfocmd = "VC" EOM; break;
	case RIG_VFO_N(3): vfocmd = "VD" EOM; break;
	case RIG_VFO_N(4): vfocmd = "VE" EOM; break;
	case RIG_VFO_N(5): vfocmd = "VF" EOM; break;
	case RIG_VFO_N(6): vfocmd = "VG" EOM; break;
	case RIG_VFO_N(7): vfocmd = "VH" EOM; break;
	case RIG_VFO_N(8): vfocmd = "VI" EOM; break;
	case RIG_VFO_N(9): vfocmd = "VJ" EOM; break;

	default:
		rig_debug(RIG_DEBUG_ERR,"aor_set_vfo: unsupported vfo %d\n",
						vfo);
		return -RIG_EINVAL;
	}

	return sr2200_transaction (rig, vfocmd, strlen(vfocmd), NULL, NULL);
}


/*
 * sr2200_get_vfo
 * Assumes rig!=NULL, freq!=NULL
 */
int sr2200_get_vfo(RIG *rig, vfo_t *vfo)
{
	int vfo_len, retval;
	char vfobuf[BUFSZ];

	retval = sr2200_transaction (rig, "RX" EOM, 3, vfobuf, &vfo_len);
	if (retval != RIG_OK)
		return retval;

	switch (vfobuf[1]) {

	case 'A': *vfo = RIG_VFO_A; break;
	case 'B': *vfo = RIG_VFO_B; break;
	case 'C': *vfo = RIG_VFO_C; break;
	case 'D': *vfo = RIG_VFO_N(3); break;
	case 'E': *vfo = RIG_VFO_N(4); break;
	case 'F': *vfo = RIG_VFO_N(5); break;
	case 'G': *vfo = RIG_VFO_N(6); break;
	case 'H': *vfo = RIG_VFO_N(7); break;
	case 'I': *vfo = RIG_VFO_N(8); break;
	case 'J': *vfo = RIG_VFO_N(9); break;

	default:
		rig_debug(RIG_DEBUG_ERR,"aor_get_vfo: unknown vfo %c\n",
						vfobuf[1]);
		return -RIG_EINVAL;
	}

	return RIG_OK;
}


/*
 * sr2200_set_level
 * Assumes rig!=NULL, rig->state.priv!=NULL
 */
int sr2200_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
	struct rig_state *rs;
	char lvlbuf[BUFSZ];
	int lvl_len;
	unsigned i;
	int agc;
	unsigned att = 0;

	rs = &rig->state;

	switch (level) {
	case RIG_LEVEL_AF:
		if (val.f > 255.0F)
			lvl_len = sprintf(lvlbuf, "AG255" EOM);
		else
			lvl_len = sprintf(lvlbuf, "AG%03d" EOM,(int)val.f);
	break;

	case RIG_LEVEL_RF:
		if (val.f > 0)
			lvl_len = sprintf(lvlbuf, "AM1" EOM);
		else
			lvl_len = sprintf(lvlbuf, "AM0" EOM);
		break;

	case RIG_LEVEL_ATT:
		for (i=0; i<MAXDBLSTSIZ && !RIG_IS_DBLST_END(rs->attenuator[i]); i++) {
			if (rs->attenuator[i] == val.i) {
				att = i+1;
				break;
			}
		}
		/* should be caught by the front end */
		if ((val.i != 0) & (i>=MAXDBLSTSIZ || RIG_IS_DBLST_END(rs->attenuator[i])) )
			return -RIG_EINVAL;

		lvl_len = sprintf(lvlbuf, "AT%u" EOM, att);
		break;

	case RIG_LEVEL_AGC:
		switch(val.i) {
		case RIG_AGC_FAST: agc = '1'; break;
		case RIG_AGC_MEDIUM: agc = '3'; break;
		case RIG_AGC_SLOW: agc = '2'; break;
		case RIG_AGC_OFF:
		default: agc = '0';
		}
		lvl_len = sprintf(lvlbuf,"AC%c" EOM, agc);
		break;

	default:
		rig_debug(RIG_DEBUG_ERR,"Unsupported aor_set_level %d\n", level);
		return -RIG_EINVAL;
	}

	return sr2200_transaction (rig, lvlbuf, lvl_len, NULL, NULL);
}

/*
 * sr2200_get_level
 * Assumes rig!=NULL, rig->state.priv!=NULL, val!=NULL
 */
int sr2200_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
	struct rig_state *rs;
	char lvlbuf[BUFSZ],ackbuf[BUFSZ];
	int lvl_len, ack_len, retval;

	rs = &rig->state;

	switch (level) {
	case RIG_LEVEL_RAWSTR:
		lvl_len = sprintf(lvlbuf, "LM" EOM);
		break;
	case RIG_LEVEL_ATT:
		lvl_len = sprintf(lvlbuf, "AT" EOM);
		break;
	case RIG_LEVEL_AGC:
		lvl_len = sprintf(lvlbuf, "AC" EOM);
		break;
	case RIG_LEVEL_AF:
		lvl_len = sprintf(lvlbuf, "AG" EOM);
		break;
	case RIG_LEVEL_RF:
		lvl_len = sprintf(lvlbuf, "AM" EOM);
		break;
	default:
		rig_debug(RIG_DEBUG_ERR,"Unsupported %s %d\n", __FUNCTION__, level);
		return -RIG_EINVAL;
	}

	retval = sr2200_transaction (rig, lvlbuf, lvl_len, ackbuf, &ack_len);

	if (retval != RIG_OK)
			return retval;

	switch (level) {
	case RIG_LEVEL_RAWSTR:
		if (ack_len < 17 || ackbuf[13] != 'L' || ackbuf[14] != 'M')
			return -RIG_EPROTO;
		sscanf(ackbuf+15, "%d", &val->i);
		break;

	case RIG_LEVEL_ATT:
		{
		unsigned att;
		if (ack_len < 4 || ackbuf[0] != 'A' || ackbuf[1] != 'T')
			return -RIG_EPROTO;
		att = ackbuf[2]-'0';

		if (att == 0) {
			val->i = 0;
			break;
		}
		if (att > MAXDBLSTSIZ || rs->attenuator[att-1]==0) {
			rig_debug(RIG_DEBUG_ERR,"Unsupported att %s %d\n",
							__FUNCTION__, att);
			return -RIG_EPROTO;
		}
		val->i = rs->attenuator[att-1];
		break;
		}
	case RIG_LEVEL_AGC:
		if (ack_len < 3 || ackbuf[0] != 'A' || ackbuf[1] != 'C')
			return -RIG_EPROTO;


		switch(ackbuf[2]) {
			case '1': val->i = RIG_AGC_FAST; break;
			case '3': val->i = RIG_AGC_MEDIUM; break;
			case '2': val->i = RIG_AGC_SLOW; break;
			case '0':
			default: val->i = RIG_AGC_OFF;
		}

		break;

	case RIG_LEVEL_AF:
			if (ack_len < 3 || ackbuf[0] != 'A' || ackbuf[1] != 'G')
			return -RIG_EPROTO;
		sscanf(ackbuf+2, "%f", &val->f);
		break;

	case RIG_LEVEL_RF:
			if (ack_len < 3 || ackbuf[0] != 'A' || ackbuf[1] != 'M')
			return -RIG_EPROTO;
		sscanf(ackbuf+2, "%f", &val->f);
		break;

	default:
		rig_debug(RIG_DEBUG_ERR,"Unsupported %s %d\n", __FUNCTION__, level);
		return -RIG_EINVAL;
	}

	return RIG_OK;
}