/* * Hamlib Kenwood backend - TS440 description * Copyright (c) 2000-2004 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "kenwood.h" #include "ic10.h" #define TS440_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY) #define TS440_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY) #define TS440_AM_TX_MODES RIG_MODE_AM #define TS440_FUNC_ALL RIG_FUNC_LOCK #define TS440_LEVEL_ALL RIG_LEVEL_NONE #define TS440_VFO (RIG_VFO_A|RIG_VFO_B) #define TS440_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN) #define TS440_SCAN_OPS (RIG_SCAN_VFO) static struct kenwood_priv_caps ts440_priv_caps = { .cmdtrm = EOM_KEN, .if_len = 38, }; /* * ts440 rig capabilities. * * TODO: scan, get/set_channel, RIT/XIT, Voice Recall, split * * part of infos comes from .http = //www.n7uic.net/radio/kenwood/ts440/specs.htm * .http = //public.srce.hr/9A1CDD/mods/kenwood/knwdif.mod * .http = //www.ifrance.fr/clucas/modposte/ts440/mod440.htm * */ const struct rig_caps ts440_caps = { .rig_model = RIG_MODEL_TS440, .model_name = "TS-440", .mfg_name = "Kenwood", .version = BACKEND_VER "." IC10_VER, .copyright = "LGPL", .status = RIG_STATUS_ALPHA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_NONE, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 1200, .serial_rate_max = 4800, .serial_data_bits = 8, .serial_stop_bits = 2, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_HARDWARE, .write_delay = 20, .post_write_delay = 30, .timeout = 200, .retry = 3, .has_get_func = RIG_FUNC_NONE, .has_set_func = TS440_FUNC_ALL, .has_get_level = TS440_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(TS440_LEVEL_ALL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .level_gran = {}, .parm_gran = {}, .ctcss_list = NULL, .dcs_list = NULL, .preamp = { RIG_DBLST_END, }, .attenuator = { RIG_DBLST_END, }, .max_rit = Hz(9990), .max_xit = Hz(9990), .max_ifshift = Hz(0), .targetable_vfo = RIG_TARGETABLE_FREQ, .vfo_ops = TS440_VFO_OPS, .scan_ops = TS440_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 0, 99, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} }, RIG_CHAN_END, }, .rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */ .tx_range_list1 = { RIG_FRNG_END, }, .rx_range_list2 = { {kHz(100),MHz(30),TS440_ALL_MODES,-1,-1,TS440_VFO}, RIG_FRNG_END, }, /* rx range */ .tx_range_list2 = { {kHz(1800),MHz(2)-1,TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {kHz(1800),MHz(2)-1,TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {kHz(3500),MHz(4)-1,TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {kHz(3500),MHz(4)-1,TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {MHz(7),kHz(7300),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {MHz(7),kHz(7300),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {kHz(10100),kHz(10150),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {kHz(10100),kHz(10150),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {MHz(14),kHz(14350),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {MHz(14),kHz(14350),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {kHz(18068),kHz(18168),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {kHz(18068),kHz(18168),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {MHz(21),kHz(21450),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {MHz(21),kHz(21450),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {kHz(24890),kHz(24990),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {kHz(24890),kHz(24990),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, {MHz(28),kHz(29700),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO}, {MHz(28),kHz(29700),TS440_AM_TX_MODES,2000,W(110),TS440_VFO}, RIG_FRNG_END, }, /* tx range */ .tuning_steps = { {TS440_ALL_MODES,10}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.2)}, {RIG_MODE_AM, kHz(6)}, {RIG_MODE_FM, kHz(12)}, RIG_FLT_END, }, .priv = (void *)&ts440_priv_caps, .rig_init = kenwood_init, .rig_cleanup = kenwood_cleanup, .set_freq = kenwood_set_freq, .get_freq = ic10_get_freq, .set_rit = kenwood_set_rit, .get_rit = kenwood_get_rit, .set_xit = kenwood_set_xit, .get_xit = kenwood_get_xit, .set_mode = kenwood_set_mode, .get_mode = ic10_get_mode, .set_vfo = ic10_set_vfo, .get_vfo = ic10_get_vfo, .set_split_vfo = ic10_set_split_vfo, .get_split_vfo = ic10_get_split_vfo, .set_ptt = kenwood_set_ptt, .get_ptt = ic10_get_ptt, .set_func = kenwood_set_func, .vfo_op = kenwood_vfo_op, .set_mem = kenwood_set_mem, .get_mem = ic10_get_mem, .set_trn = kenwood_set_trn, .scan = kenwood_scan, .set_channel = ic10_set_channel, .get_channel = ic10_get_channel, .decode_event = ic10_decode_event, }; /* * Function definitions below */