/* * hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net) * * ft450.c - (C) Nate Bargmann 2007 (n0nb at arrl.net) * (C) Stephane Fillod 2008 * (C) Terry Embry 2008-2009 * * This shared library provides an API for communicating * via serial interface to an FT-450 using the "CAT" interface * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "hamlib/rig.h" #include "bandplan.h" #include "serial.h" #include "misc.h" #include "yaesu.h" #include "newcat.h" #include "ft450.h" #include "idx_builtin.h" /* * ft450 rigs capabilities. * Also this struct is READONLY! * */ const struct rig_caps ft450_caps = { RIG_MODEL(RIG_MODEL_FT450), .model_name = "FT-450", .mfg_name = "Yaesu", .version = NEWCAT_VER ".0", .copyright = "LGPL", .status = RIG_STATUS_BETA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_NONE, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 4800, /* Default rate per manual */ .serial_rate_max = 38400, .serial_data_bits = 8, .serial_stop_bits = 1, /* Assumed since manual makes no mention */ .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_HARDWARE, .write_delay = FT450_WRITE_DELAY, .post_write_delay = FT450_POST_WRITE_DELAY, .timeout = 2000, .retry = 3, .has_get_func = FT450_FUNCS, .has_set_func = FT450_FUNCS, .has_get_level = FT450_LEVELS, .has_set_level = RIG_LEVEL_SET(FT450_LEVELS), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, [LVL_CWPITCH] = { .min = { .i = 400 }, .max = { .i = 800 }, .step = { .i = 100 } }, }, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 10, RIG_DBLST_END, }, /* TBC */ .attenuator = { 18, RIG_DBLST_END, }, /* TBC */ .max_rit = Hz(9999), .max_xit = Hz(0), .max_ifshift = Hz(1000), .vfo_ops = FT450_VFO_OPS, .targetable_vfo = RIG_TARGETABLE_FREQ, .transceive = RIG_TRN_OFF, /* May enable later as the 450 has an Auto Info command */ .bank_qty = 0, .chan_desc_sz = 0, .str_cal = FT450_STR_CAL, .chan_list = { { 1, 500, RIG_MTYPE_MEM, NEWCAT_MEM_CAP }, { 501, 504, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30), MHz(60), FT450_ALL_RX_MODES, -1, -1, FT450_VFO_ALL, FT450_ANTS}, /* General coverage + ham */ RIG_FRNG_END, }, /* FIXME: Are these the correct Region 1 values? */ .tx_range_list1 = { FRQ_RNG_HF(1, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS), FRQ_RNG_HF(1, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */ FRQ_RNG_6m(1, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS), FRQ_RNG_6m(1, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30), MHz(56), FT450_ALL_RX_MODES, -1, -1, FT450_VFO_ALL, FT450_ANTS}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS), FRQ_RNG_HF(2, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */ FRQ_RNG_6m(2, FT450_OTHER_TX_MODES, W(5), W(100), FT450_VFO_ALL, FT450_ANTS), FRQ_RNG_6m(2, FT450_AM_TX_MODES, W(2), W(25), FT450_VFO_ALL, FT450_ANTS), /* AM class */ RIG_FRNG_END, }, .tuning_steps = { {FT450_SSB_CW_RX_MODES, Hz(10)}, /* Normal */ {FT450_SSB_CW_RX_MODES, Hz(100)}, /* Fast */ {FT450_AM_RX_MODES, Hz(100)}, /* Normal */ {FT450_AM_RX_MODES, kHz(1)}, /* Fast */ {FT450_FM_RX_MODES, Hz(100)}, /* Normal */ {FT450_FM_RX_MODES, kHz(1)}, /* Fast */ RIG_TS_END, }, /* mode/filter list, .remember = order matters! */ .filters = { {FT450_CW_RTTY_PKT_RX_MODES, Hz(1800)}, /* Normal CW, RTTY, PKT/USER */ {FT450_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */ {FT450_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */ {RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */ {RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */ {RIG_MODE_SSB, Hz(3000)}, /* Wide SSB */ {RIG_MODE_AM, Hz(6000)}, /* Normal AM */ {RIG_MODE_AM, Hz(3000)}, /* Narrow AM */ {FT450_FM_RX_MODES, Hz(12000)}, /* Normal FM */ {FT450_FM_RX_MODES, Hz(8000)}, /* Narrow FM */ RIG_FLT_END, }, .priv = NULL, /* private data FIXME: */ .rig_init = newcat_init, .rig_cleanup = newcat_cleanup, .rig_open = newcat_open, /* port opened */ .rig_close = newcat_close, /* port closed */ .cfgparams = newcat_cfg_params, .set_conf = newcat_set_conf, .get_conf = newcat_get_conf, .set_freq = newcat_set_freq, .get_freq = newcat_get_freq, .set_mode = newcat_set_mode, .get_mode = newcat_get_mode, .set_vfo = newcat_set_vfo, .get_vfo = newcat_get_vfo, .set_ptt = newcat_set_ptt, .get_ptt = newcat_get_ptt, .set_split_vfo = newcat_set_split_vfo, .get_split_vfo = newcat_get_split_vfo, .set_rit = newcat_set_rit, .get_rit = newcat_get_rit, .get_func = newcat_get_func, .set_func = newcat_set_func, .get_level = newcat_get_level, .set_level = newcat_set_level, .get_mem = newcat_get_mem, .set_mem = newcat_set_mem, .vfo_op = newcat_vfo_op, .get_info = newcat_get_info, .power2mW = newcat_power2mW, .mW2power = newcat_mW2power, .set_rptr_shift = newcat_set_rptr_shift, .get_rptr_shift = newcat_get_rptr_shift, .set_ctcss_tone = newcat_set_ctcss_tone, .get_ctcss_tone = newcat_get_ctcss_tone, .set_ctcss_sql = newcat_set_ctcss_sql, .get_ctcss_sql = newcat_get_ctcss_sql, .set_powerstat = newcat_set_powerstat, .get_powerstat = newcat_get_powerstat, .get_ts = newcat_get_ts, .set_ts = newcat_set_ts, .set_trn = newcat_set_trn, .get_trn = newcat_get_trn, .set_channel = newcat_set_channel, .get_channel = newcat_get_channel, };