/* * Hamlib CI-V backend - defines for the ICOM "CI-V" interface. * Copyright (c) 2000-2002 by Stephane Fillod * * $Id: icom_defs.h,v 1.14 2002-03-10 23:39:35 fillods Exp $ * * This library is free software; you can redistribute it and/or modify * it under the terms of the GNU Library General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #ifndef _ICOM_DEFS_H #define _ICOM_DEFS_H 1 /* * CI-V frame codes */ #define PR 0xfe /* Preamble code */ #define CTRLID 0xe0 /* Controllers's default address */ #define BCASTID 0x00 /* Broadcast address */ #define FI 0xfd /* End of message code */ #define ACK 0xfb /* OK code */ #define NAK 0xfa /* NG code */ #define COL 0xfc /* CI-V bus collision detected */ #define PAD 0xff /* Transmit padding */ #define ACKFRMLEN 6 /* reply frame length */ #define S_NONE -1 /* * Arguments length in bytes */ #define CHAN_NB_LEN 2 #define BANK_NB_LEN 2 #define OFFS_LEN 3 /* * Cn controller commands * Notes: * 1. When wide or normal op available: add "00" for wide, "01" normal * Normal or narrow op: add "00" for normal, "01" for narrow * Wide, normal or narrow op: add "00" for wide, "01" normal, "02" narrow * 2. Memory channel number 1A=0100/1b=0101, 2A=0102/2b=0103, * 3A=0104/3b=0105, C1=0106, C2=0107 */ #define C_SND_FREQ 0x00 /* Send frequency data */ #define C_SND_MODE 0x01 /* Send mode data, Sc */ #define C_RD_BAND 0x02 /* Read band edge frequencies */ #define C_RD_FREQ 0x03 /* Read display frequency */ #define C_RD_MODE 0x04 /* Read display mode */ #define C_SET_FREQ 0x05 /* Set frequency data(1) */ #define C_SET_MODE 0x06 /* Set mode data, Sc */ #define C_SET_VFO 0x07 /* Set VFO */ #define C_SET_MEM 0x08 /* Set channel, Sc(2) */ #define C_WR_MEM 0x09 /* Write memory */ #define C_MEM2VFO 0x0a /* Memory to VFO */ #define C_CLR_MEM 0x0b /* Memory clear */ #define C_RD_OFFS 0x0c /* Read duplex offset frequency */ #define C_SET_OFFS 0x0d /* Set duplex offset frequency */ #define C_CTL_SCAN 0x0e /* Control scan, Sc */ #define C_CTL_SPLT 0x0f /* Control split, Sc */ #define C_SET_TS 0x10 /* Set tuning step, Sc */ #define C_CTL_ATT 0x11 /* Set attenuator, Sc */ #define C_CTL_ANT 0x12 /* Set antenna, Sc */ #define C_CTL_ANN 0x13 /* Control announce (speech synth.), Sc */ #define C_CTL_LVL 0x14 /* Set AF/RF/squelch, Sc */ #define C_RD_SQSM 0x15 /* Read squelch condiction/S-meter level, Sc */ #define C_CTL_FUNC 0x16 /* Function settings (AGC,NB,etc.), Sc */ #define C_SND_CW 0x17 /* Send CW message */ #define C_SET_PWR 0x18 /* Set Power ON/OFF, Sc */ #define C_RD_TRXID 0x19 /* Read transceiver ID code */ #define C_CTL_MEM 0x1a /* Misc memory/bank functions, Sc */ #define C_SET_TONE 0x1b /* Set tone frequency */ #define C_CTL_PTT 0x1c /* Control Transmit On/Off, Sc */ #define C_CTL_MISC 0x7f /* Miscellaneous control, Sc */ /* * Sc controller sub commands */ /* * Set mode data (C_SET_MODE) sub commands */ #define S_LSB 0x00 /* Set to LSB */ #define S_USB 0x01 /* Set to USB */ #define S_AM 0x02 /* Set to AM */ #define S_CW 0x03 /* Set to CW */ #define S_RTTY 0x04 /* Set to RTTY */ #define S_FM 0x05 /* Set to FM */ #define S_WFM 0x06 /* Set to Wide FM */ #define S_R7000_SSB 0x05 /* Set to SSB on R-7000 */ #define PD_WIDE 0x01 /* Wide */ #define PD_MEDIUM 0x02 /* Medium */ #define PD_NARROW 0x03 /* Narrow */ /* * Set VFO (C_SET_VFO) sub commands */ #define S_VFOA 0x00 /* Set to VFO A */ #define S_VFOB 0x01 /* Set to VFO B */ #define S_BTOA 0xa0 /* VFO A=B */ #define S_XCHNG 0xb0 /* Switch VFO A and B */ #define S_SUBTOMAIN 0xb1 /* MAIN = SUB */ #define S_DUAL_OFF 0xc0 /* Dual watch off */ #define S_DUAL_ON 0xc1 /* Dual watch on */ #define S_MAIN 0xd0 /* Select MAIN band */ #define S_SUB 0xd1 /* Select SUB band */ #define S_FRONTWIN 0xe0 /* Select front window */ /* * Set MEM (C_SET_MEM) sub commands */ #define S_BANK 0xa0 /* Select memory bank */ /* * Scan control (C_CTL_SCAN) subcommands */ #define S_SCAN_STOP 0x00 /* Stop scan/window scan */ #define S_SCAN_START 0x01 /* Programmed/Memory scan */ #define S_SCAN_PROG 0x02 /* Programmed scan */ #define S_SCAN_DELTA 0x03 /* Delta-f scan */ #define S_SCAN_WRITE 0x04 /* auto memory-write scan */ #define S_SCAN_FPROG 0x12 /* Fine programmed scan */ #define S_SCAN_FDELTA 0x13 /* Fine delta-f scan */ #define S_SCAN_MEM2 0x22 /* Memory scan */ #define S_SCAN_SLCTN 0x23 /* Selected number memory scan */ #define S_SCAN_SLCTM 0x24 /* Selected mode memory scan */ #define S_SCAN_PRIO 0x42 /* Priority / window scan */ #define S_SCAN_RSMOFF 0xD0 /* Set scan resume OFF */ #define S_SCAN_RSMON 0xD3 /* Set scan resume ON */ /* * Split control (S_CTL_SPLT) subcommands */ #define S_SPLT_OFF 0x00 /* Split OFF */ #define S_SPLT_ON 0x01 /* Split ON */ #define S_DUP_OFF 0x10 /* Simplex mode */ #define S_DUP_M 0x11 /* Duplex - mode */ #define S_DUP_P 0x12 /* Duplex + mode */ /* * Set Attenuator (C_CTL_ATT) subcommands */ #define S_ATT_RD 0x00 /* Without subcommand, reads out setting */ #define S_ATT_OFF 0x00 /* Off */ #define S_ATT_6dB 0x06 /* 6 dB, IC-756Pro */ #define S_ATT_10dB 0x10 /* 10 dB */ #define S_ATT_12dB 0x12 /* 12 dB, IC-756Pro */ #define S_ATT_18dB 0x18 /* 18 dB, IC-756Pro */ #define S_ATT_20dB 0x20 /* 20 dB */ #define S_ATT_30dB 0x30 /* 30 dB, or Att on for IC-R75 */ /* * Set Preamp (S_FUNC_PAMP) data */ #define D_PAMP_OFF 0x00 #define D_PAMP1 0x01 #define D_PAMP2 0x02 /* * Set antenna (C_SET_ANT) subcommands */ #define S_ANT_RD 0x00 /* Without subcommand, reads out setting */ #define S_ANT1 0x00 /* Antenna 1 */ #define S_ANT2 0x01 /* Antenna 2 */ /* * Announce control (C_CTL_ANN) subcommands */ #define S_ANN_ALL 0x00 /* Announce all */ #define S_ANN_FREQ 0x01 /* Announce freq */ #define S_ANN_MODE 0x02 /* Announce operating mode */ /* * Function settings (C_CTL_LVL) subcommands */ #define S_LVL_AF 0x01 /* AF level setting */ #define S_LVL_RF 0x02 /* RF level setting */ #define S_LVL_SQL 0x03 /* SQL level setting */ #define S_LVL_IF 0x04 /* IF shift setting */ #define S_LVL_APF 0x05 /* APF level setting */ #define S_LVL_NR 0x06 /* NR level setting */ #define S_LVL_PBTIN 0x07 /* Twin PBT setting (inside) */ #define S_LVL_PBTOUT 0x08 /* Twin PBT setting (outside) */ #define S_LVL_CWPITCH 0x09 /* CW pitch setting */ #define S_LVL_RFPOWER 0x0a /* RF power setting */ #define S_LVL_MICGAIN 0x0b /* MIC gain setting */ #define S_LVL_KEYSPD 0x0c /* Key Speed setting */ #define S_LVL_NOTCHF 0x0d /* Notch freq. setting */ #define S_LVL_COMP 0x0e /* Compressor level setting */ #define S_LVL_BKINDL 0x0f /* BKin delay setting */ #define S_LVL_BALANCE 0x10 /* Balance setting (Dual watch) */ /* * Read squelch condition/S-meter level (C_RD_SQSM) subcommands */ #define S_SQL 0x01 /* Read squelch condition */ #define S_SML 0x02 /* Read S-meter level */ /* * Function settings (C_CTL_FUNC) subcommands */ #define S_FUNC_PAMP 0x02 /* Preamp setting */ #define S_FUNC_AGCOFF 0x10 /* IC-R8500 only */ #define S_FUNC_AGCON 0x11 /* IC-R8500 only */ #define S_FUNC_AGC 0x12 /* AGC setting */ #define S_FUNC_NBOFF 0x20 /* IC-R8500 only */ #define S_FUNC_NBON 0x21 /* IC-R8500 only */ #define S_FUNC_NB 0x22 /* NB setting */ #define S_FUNC_APFOFF 0x30 /* IC-R8500 only */ #define S_FUNC_APFON 0x31 /* IC-R8500 only */ #define S_FUNC_APF 0x32 /* APF setting */ #define S_FUNC_NR 0x40 /* NR setting */ #define S_FUNC_ANF 0x41 /* ANF setting */ #define S_FUNC_TONE 0x42 /* TONE setting */ #define S_FUNC_TSQL 0x43 /* TSQL setting */ #define S_FUNC_COMP 0x44 /* COMP setting */ #define S_FUNC_MON 0x45 /* Monitor setting */ #define S_FUNC_VOX 0x46 /* VOX setting */ #define S_FUNC_BKIN 0x47 /* BK-IN setting */ #define S_FUNC_MN 0x48 /* Manual notch setting */ #define S_FUNC_RNF 0x49 /* RTTY Filter Notch setting */ #define S_FUNC_AFC 0x4A /* Auto Frequency Control (AFC) setting */ /* * Transceiver ID (C_RD_TRXID) subcommands */ #define S_TRXID 0x00 /* Read transceiver ID code */ /* * Set Power On/Off (C_SET_PWR) subcommands */ #define S_PWR_OFF 0x00 #define S_PWR_ON 0x01 /* * Transmit control (C_CTL_PTT) subcommands */ #define S_PTT_ON 0x00 /* no documentation, not tested! */ #define S_PTT_OFF 0x01 /* please confirm (IC-756Pro, IC-746) --SF */ /* * Memory contents (C_CTL_MEM) subcommands */ #define S_MEM_CNTNT 0x00 #define S_MEM_CNTNT_SLCT 0x01 /* For IC-910H rig. */ #define S_MEM_RDWR_MEM 0x00 /* Read/write memory channel */ #define S_MEM_SATMEM 0x01 /* Satellite memory */ #define S_MEM_VOXGAIN 0x02 /* VOX gain level (0=0%, 255=100%) */ #define S_MEM_VOXDELAY 0x03 /* VOX delay (0=0.0 sec, 20=2.0 sec) */ #define S_MEM_ANTIVOX 0x04 /* anti VOX setting */ #define S_MEM_ATTLEVEL 0x05 /* Attenuation level (0=0%, 255=100%) */ #define S_MEM_RIT 0x06 /* RIT (0=off, 1=on, 2=sub dial) */ #define S_MEM_SATMODE 0x07 /* Satellite mode (on/off) */ #define S_MEM_BANDSCOPE 0x08 /* Simple bandscope (on/off) */ /* * Tone control (C_SET_TONE) subcommands */ #define S_TONE_RPTR 0x00 /* Tone frequency setting for repeater user */ #define S_TONE_SQL 0x01 /* Tone frequency setting for squelch */ /* * C_RD_TRXID */ #define S_RD_TRXID 0x00 /* * C_CTL_MISC OptoScan extension */ #define S_OPTO_LOCAL 0x01 #define S_OPTO_REMOTE 0x02 #define S_OPTO_TAPE_ON 0x03 #define S_OPTO_TAPE_OFF 0x04 #define S_OPTO_RDSTAT 0x05 #define S_OPTO_RDCTCSS 0x06 #define S_OPTO_RDDCS 0x07 #define S_OPTO_RDDTMF 0x08 #define S_OPTO_RDID 0x09 #define S_OPTO_SPKRON 0x0a #define S_OPTO_SPKROFF 0x0b #define S_OPTO_5KSCON 0x0c #define S_OPTO_5KSCOFF 0x0d #define S_OPTO_NXT 0x0e #define S_OPTO_SCON 0x0f #define S_OPTO_SCOFF 0x10 #endif /* _ICOM_DEFS_H */