Source: hamlib Section: hamradio Priority: optional Maintainer: Terry Dawson Build-Depends: debhelper (>> 3.0.0), autoconf, automake, libtool Standards-Version: 3.5.2 Package: hamlib-dev Architecture: any Depends: hamlib1 (= ${Source-Version}), libc6-dev Description: Development library to control radio transcievers and receivers. Most recent amateur radio transceivers allow external control of their functions through a computer interface. Unfortunately, control commands are not always consistent across a manufacturer's product line and each manufacturer's product line differs greatly from its competitors. . This library addresses that issue by providing a standardised programming interface that applications can talk to and translating that into the appropriate commands required by the radio in use. . This package provides the development library. If you wish to run applications developed using this library you'll need the 'hamlib' package. Package: hamlib1 Architecture: any Depends: ${shlibs:Depends} Description: Run-time library to control radio transcievers and receivers. Most recent amateur radio transceivers allow external control of their functions through a computer interface. Unfortunately, control commands are not always consistent across a manufacturer's product line and each manufacturer's product line differs greatly from its competitors. . This library addresses that issue by providing a standardised programming interface that applications can talk to and translating that into the appropriate commands required by the radio in use. . This package provides the run-time form of the library. If you wish to develop software using this library you need the 'hamlib-dev' package.