/* * Hamlib CI-V backend - IC-R8500 description * Copyright (c) 2000-2004 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #include #include #include "hamlib/rig.h" #include "idx_builtin.h" #include "icom.h" #include "icom_defs.h" #define ICR8500_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_WFM) #define ICR8500_1MHZ_TS_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM) #define ICR8500_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_APF) #define ICR8500_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_APF|RIG_LEVEL_SQL|RIG_LEVEL_IF|RIG_LEVEL_RAWSTR) #define ICR8500_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL) #define ICR8500_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO) /* FIXME: real measure */ #define ICR8500_STR_CAL { 16, { \ { 0, -54 }, /* S0 */ \ { 10, -48 }, \ { 32, -42 }, \ { 46, -36 }, \ { 62, -30 }, \ { 82, -24 }, \ { 98, -18 }, \ { 112, -12 }, \ { 124, -6 }, \ { 134, 0 }, /* S9 */ \ { 156, 10 }, \ { 177, 20 }, \ { 192, 30 }, \ { 211, 40 }, \ { 228, 50 }, \ { 238, 60 }, \ } } int icr8500_set_func(RIG *rig, vfo_t vfo, setting_t func, int status); static struct icom_priv_caps icr8500_priv_caps = { 0x4a, /* default address */ 0, /* 731 mode */ 0, /* no XCHG */ r8500_ts_sc_list }; /* * IC-R8500 rig capabilities. */ const struct rig_caps icr8500_caps = { RIG_MODEL(RIG_MODEL_ICR8500), .model_name = "ICR-8500", .mfg_name = "Icom", .version = BACKEND_VER ".0", .copyright = "LGPL", .status = RIG_STATUS_STABLE, .rig_type = RIG_TYPE_RECEIVER, .ptt_type = RIG_PTT_NONE, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = RIG_FUNC_NONE, .has_set_func = ICR8500_FUNC_ALL, .has_get_level = ICR8500_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(ICR8500_LEVEL_ALL | RIG_LEVEL_AF), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, /* FIXME: parms */ .level_gran = { // cppcheck-suppress * [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, [LVL_IF] = { .min = { .i = 0 }, .max = { .i = 255 }, .step = { .i = 1 } }, }, .parm_gran = {}, .ctcss_list = NULL, /* FIXME: CTCSS/DCS list */ .dcs_list = NULL, .preamp = { RIG_DBLST_END, }, .attenuator = { 10, 20, 30, RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(0), .max_ifshift = kHz(1.2), .targetable_vfo = 0, .vfo_ops = ICR8500_OPS, .scan_ops = ICR8500_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 12, .chan_desc_sz = 0, .str_cal = ICR8500_STR_CAL, .chan_list = { /* FIXME: memory channel list */ { 1, 999, RIG_MTYPE_MEM, IC_MIN_MEM_CAP }, RIG_CHAN_END, }, .rx_range_list1 = { {kHz(100), MHz(824) - 10, ICR8500_MODES, -1, -1, RIG_VFO_A}, {MHz(849) + 10, MHz(869) - 10, ICR8500_MODES, -1, -1, RIG_VFO_A}, {MHz(894) + 10, GHz(2) - 10, ICR8500_MODES, -1, -1, RIG_VFO_A}, RIG_FRNG_END, }, .tx_range_list1 = { RIG_FRNG_END, }, .rx_range_list2 = { {kHz(100), MHz(824) - 10, ICR8500_MODES, -1, -1, RIG_VFO_A}, {MHz(849) + 10, MHz(869) - 10, ICR8500_MODES, -1, -1, RIG_VFO_A}, {MHz(894) + 10, GHz(2) - 10, ICR8500_MODES, -1, -1, RIG_VFO_A}, RIG_FRNG_END, }, .tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */ .tuning_steps = { {ICR8500_MODES, 10}, {ICR8500_MODES, 50}, {ICR8500_MODES, 100}, {ICR8500_MODES, kHz(1)}, {ICR8500_MODES, 2500}, {ICR8500_MODES, kHz(5)}, {ICR8500_MODES, kHz(9)}, {ICR8500_MODES, kHz(10)}, {ICR8500_MODES, 12500}, {ICR8500_MODES, kHz(20)}, {ICR8500_MODES, kHz(25)}, {ICR8500_MODES, kHz(100)}, {ICR8500_1MHZ_TS_MODES, MHz(1)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { /* FIXME: To be confirmed! --SF */ {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.4)}, {RIG_MODE_AM, kHz(8)}, {RIG_MODE_AM, kHz(2.4)}, /* narrow */ {RIG_MODE_AM, kHz(15)}, /* wide */ {RIG_MODE_FM, kHz(15)}, {RIG_MODE_FM, kHz(8)}, /* narrow */ {RIG_MODE_WFM, kHz(230)}, RIG_FLT_END, }, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void *)& icr8500_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = icom_rig_open, .rig_close = icom_rig_close, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .decode_event = icom_decode_event, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icr8500_set_func, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .get_dcd = icom_get_dcd, .hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS" }; int icr8500_set_func(RIG *rig, vfo_t vfo, setting_t func, int status) { switch (func) { case RIG_FUNC_NB: return icom_set_raw(rig, C_CTL_FUNC, status ? S_FUNC_NBON : S_FUNC_NBOFF, 0, NULL, 0, 0); case RIG_FUNC_FAGC: return icom_set_raw(rig, C_CTL_FUNC, status ? S_FUNC_AGCON : S_FUNC_AGCOFF, 0, NULL, 0, 0); case RIG_FUNC_APF: return icom_set_raw(rig, C_CTL_FUNC, status ? S_FUNC_APFON : S_FUNC_APFOFF, 0, NULL, 0, 0); default: return icom_set_func(rig, vfo, func, status); } }