/*
 *  Hamlib JRC backend - NRD-545 DSP description
 *  Copyright (c) 2001-2002 by Stephane Fillod
 *
 *	$Id: nrd545.c,v 1.3 2002-08-16 17:43:01 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <hamlib/rig.h>
#include "jrc.h"


#define NRD545_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)

#define NRD545_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_LOCK|RIG_FUNC_ABM|RIG_FUNC_BC|RIG_FUNC_NR)

#define NRD545_LEVEL (RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH|RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_AGC|RIG_LEVEL_IF|RIG_LEVEL_NR|RIG_LEVEL_NOTCHF|RIG_LEVEL_SQL)

/* FIXME: add more from "U" command */
#define NRD545_PARM (RIG_PARM_TIME|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP)

#define NRD545_VFO (RIG_VFO_A)

/*
 * FIXME: measure S-meter levels
 */
#define NRD545_STR_CAL { 2, { \
		{   0, -60 }, \
		{ 255, 60 }, \
	} }

static const struct jrc_priv_caps nrd545_priv_caps = {
		NRD545_STR_CAL
};

/*
 * NRD-545 rig capabilities.
 *
 */
const struct rig_caps nrd545_caps = {
.rig_model =  RIG_MODEL_NRD545,
.model_name = "NRD-545 DSP",
.mfg_name =  "JRC",
.version =  "0.1",
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  4800,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,

.has_get_func =  NRD545_FUNC,
.has_set_func =  NRD545_FUNC,
.has_get_level =  NRD545_LEVEL,
.has_set_level =  RIG_LEVEL_SET(NRD545_LEVEL),
.has_get_parm =  RIG_PARM_TIME,
.has_set_parm =  RIG_PARM_SET(NRD545_PARM),
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { 20, RIG_DBLST_END },	/* To be confirmed */
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  kHz(2.3),
.targetable_vfo =  0,
.transceive =  RIG_TRN_RIG,
.vfo_ops =  RIG_OP_FROM_VFO,
.scan_ops =  RIG_SCAN_STOP|RIG_SCAN_SLCT,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
			{ 0, 999, RIG_MTYPE_MEM, 0 },
			RIG_CHAN_END,
		},

.rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
	{kHz(100),MHz(30),NRD545_MODES,-1,-1,NRD545_VFO},
	RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },

.tuning_steps =  {
	 {NRD545_MODES,1},
	 {NRD545_MODES,10},
	 {NRD545_MODES,100},
	 {NRD545_MODES,kHz(1)},
	 {NRD545_MODES,kHz(5)},
	 {NRD545_MODES,kHz(6.25)},
	 {NRD545_MODES,kHz(9)},
	 {NRD545_MODES,kHz(10)},
	 {NRD545_MODES,kHz(12.5)},
	 {NRD545_MODES,kHz(20)},
	 {NRD545_MODES,kHz(25)},
	 {NRD545_MODES,kHz(30)},
	 {NRD545_MODES,kHz(100)},
	 RIG_TS_END,
	},
        /* mode/filter list, .remember =  order matters! */
.filters =  {
		{RIG_MODE_AM|RIG_MODE_FM, kHz(10)},
		{NRD545_MODES, kHz(2.4)},
		{NRD545_MODES, kHz(1)},
		{NRD545_MODES, kHz(4.5)},
		RIG_FLT_END,
	},
.priv =  (void*)&nrd545_priv_caps,

.rig_open =  jrc_open,
.rig_close =  jrc_close,
.set_freq =  jrc_set_freq,
.get_freq =  jrc_get_freq,
.set_mode =  jrc_set_mode,
.set_func =  jrc_set_func,
.get_func =  jrc_get_func,
.set_level =  jrc_set_level,
.get_level =  jrc_get_level,
.set_parm =  jrc_set_parm,
.get_parm =  jrc_get_parm,
.get_dcd =  jrc_get_dcd,
.set_trn =  jrc_set_trn,
.reset =  jrc_reset,
.set_mem =  jrc_set_mem,
.vfo_op =  jrc_vfo_op,
.scan =  jrc_scan,
.set_powerstat =  jrc_set_powerstat,
.decode_event =  jrc_decode_event,

};

/*
 * Function definitions below
 */