/* * Hamlib TenTenc backend - TT-565 description * Copyright (c) 2004-2006 by Stephane Fillod & Martin Ewing * * $Id: orion.c,v 1.17 2006-10-30 20:17:58 aa6e Exp $ * * This library is free software; you can redistribute it and/or modify * it under the terms of the GNU Library General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ /* Edits by Martin Ewing AA6E, 23 Mar 2005 --> ?? * Added valid length settings before tentec_transaction calls. * Added vfo_curr initialization to VFO A * Fixed up VSWR & S-meter, set ATT, set AGC, add rough STR_CAL func. * Use local tt565_transaction due to quirky serial interface * Variable-length transaction read ok. * Calibrated S-meter response with signal generator. * Read re-tries implemented. * Added RIG_LEVEL_CWPITCH, RIG_LEVEL_KEYSPD, send_morse() * Added RIG_FUNC_TUNER, RIG_FUNC_LOCK and RIG_FUNC_VOX, fixed MEM_CAP. * Added VFO_OPS * Support LEVEL_VOX, VOXGAIN, ANTIVOX * Support LEVEL_NR as Orion NB setting (firmware bug), FUNC_NB -> NB=0,4 * Add get_, set_ant (ignores rx only ant) */ /* Known issues & to-do list: * Memory channels - emulate a more complete memory system? * Send_Morse() - needs to buffer more than 20 chars? * Figure out "granularities". * XCHG or other "fancy" VFO & MEM operations? */ /** * \addtogroup tentec_orion * @{ */ /** * \file orion.c * \brief Backend for Tentec Orion 565 / 566 * * This documentation is experimental, to see how we can do it for the backends. * \n This backend tested mostly with firmware version 1.372 */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include /* String function definitions */ #include /* UNIX standard function definitions */ #include #include #include "bandplan.h" #include "serial.h" #include "misc.h" #include "idx_builtin.h" #include "orion.h" #ifdef TT565_TIME /** * \returns current time in secs/microsecs */ double tt565_timenow() /* returns current time in secs+microsecs */ { struct timeval tv; gettimeofday(&tv, NULL); return (double)tv.tv_sec + ((double)tv.tv_usec)/1.0e+6; } #endif /** * \param rig Rig descriptor * \param cmd command to send * \param cmd_len length of command string * \param data string to receive return data from Orion (NULL if no return desired) * \param data_len length of data string * \returns RIG_OK or < 0 if error * \brief tt565_transaction, adapted from tentec_transaction (tentec.c) * * This is the basic I/O transaction to/from the Orion. * \n Read variable number of bytes, up to buffer size, if data & data_len != NULL. * \n We assume that rig!=NULL, rig->state!= NULL. * Otherwise, you'll get a nice seg fault. You've been warned! */ int tt565_transaction(RIG *rig, const char *cmd, int cmd_len, char *data, int *data_len) { int retval, data_len_init, itry; struct rig_state *rs; #ifdef TT565_TIME double ft1, ft2; #endif /* Capture buffer length for possible read re-try. */ data_len_init = (data && data_len) ? *data_len : 0; /* Allow transaction re-tries according to capabilities. */ for (itry=1; itry < rig->caps->retry; itry++) { rs = &rig->state; serial_flush(&rs->rigport); retval = write_block(&rs->rigport, cmd, cmd_len); if (retval != RIG_OK) return retval; /* no data expected, TODO: flush input? */ if (!data || !data_len) return 0; /* normal exit if no read */ #ifdef TT565_TIME ft1 = tt565_timenow(); #endif *data_len = data_len_init; /* restore orig. buffer length */ *data_len = read_string(&rs->rigport, data, *data_len, EOM, strlen(EOM)); if (*data_len > 0) return RIG_OK; /* normal exit if reading */ #ifdef TT565_TIME ft2 = tt565_timenow(); if (*data_len == -RIG_ETIMEOUT) rig_debug(RIG_DEBUG_ERR,"Timeout %d: Elapsed = %f secs.\n", itry, ft2-ft1); else rig_debug(RIG_DEBUG_ERR,"Other Error #%d, itry=%d: Elapsed = %f secs.\n", *data_len, itry, ft2-ft1); #endif } return -RIG_ETIMEOUT; } /** * \param rig * \returns RIG_OK or < 0 * \brief Basically, it just sets up *priv */ int tt565_init(RIG *rig) { struct tt565_priv_data *priv; priv = (struct tt565_priv_data*)malloc(sizeof(struct tt565_priv_data)); if (!priv) { return -RIG_ENOMEM; } /* no memory available */ memset(priv, 0, sizeof(struct tt565_priv_data)); priv->ch = 0; /* set arbitrary initial status */ priv->vfo_curr = RIG_VFO_A; rig->state.priv = (rig_ptr_t)priv; return RIG_OK; } /** * \param rig * \brief tt565_cleanup routine * * the serial port is closed by the frontend */ int tt565_cleanup(RIG *rig) { if (rig->state.priv) free(rig->state.priv); rig->state.priv = NULL; return RIG_OK; } /** * \param rig * \param vfo RIG_VFO_MAIN or RIG_VFO_SUB * \returns 'M' or 'S' for main or subreceiver or <0 error * \brief vfo must be RIG_VFO_MAIN or RIG_VFO_SUB * * Note that Orion's "VFO"s are supposed to be logically independent * of the main/sub receiver selection. (In reality, they are not quite * independent.) */ static char which_receiver(const RIG *rig, vfo_t vfo) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; if (vfo == RIG_VFO_CURR) vfo = priv->vfo_curr; switch (vfo) { case RIG_VFO_A: case RIG_VFO_B: case RIG_VFO_MAIN: return 'M'; case RIG_VFO_SUB: return 'S'; default: rig_debug(RIG_DEBUG_ERR,"%s: unsupported Receiver %s\n", __FUNCTION__, rig_strvfo(vfo)); return -RIG_EINVAL; } } /** * \param rig * \param vfo RIG_VFO_A, RIG_VFO_B, or RIG_VFO_NONE * \returns 'A' or 'B' or 'N' for VFO A, B, or null VFO, or <0 error * \brief vfo must be RIG_VFO_A, RIG_VFO_B, or RIG_VFO_NONE. */ static char which_vfo(const RIG *rig, vfo_t vfo) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; if (vfo == RIG_VFO_CURR) vfo = priv->vfo_curr; switch (vfo) { case RIG_VFO_A: return 'A'; case RIG_VFO_B: return 'B'; case RIG_VFO_NONE: return 'N'; default: rig_debug(RIG_DEBUG_ERR,"%s: unsupported VFO %s\n", __FUNCTION__, rig_strvfo(vfo)); return -RIG_EINVAL; } } /** * \param rig must != NULL * \param vfo RIG_VFO_A or RIG_VFO_B * \param freq * \brief Set a frequence into the specified VFO * * assumes rig->state.priv!=NULL * \n assumes priv->mode in AM,CW,LSB or USB. */ int tt565_set_freq(RIG *rig, vfo_t vfo, freq_t freq) { int cmd_len, retval; char cmdbuf[TT565_BUFSIZE]; cmd_len = sprintf (cmdbuf, "*%cF%"PRIll EOM, which_vfo(rig, vfo), (long long)freq); retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL, NULL); return retval; } /** * \param rig must != NULL * \param vfo RIG_VFO_A or RIG_VFO_B * \param freq must != NULL * \brief Get the frequency currently set in the specified VFO (A or B) * * Performs query on physical rig */ int tt565_get_freq(RIG *rig, vfo_t vfo, freq_t *freq) { int cmd_len, resp_len, retval; char cmdbuf[TT565_BUFSIZE], respbuf[TT565_BUFSIZE]; cmd_len = sprintf(cmdbuf, "?%cF" EOM, which_vfo(rig, vfo)); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[2] != 'F' || resp_len <= 3) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } *freq = (freq_t) atof(respbuf+3); return RIG_OK; } /** * \param rig must != NULL * \param vfo RIG_VFO_MAIN or RIG_VFO_SUB * \returns RIG_OK or < 0 * \brief set RIG_VFO_CURR and send info to physical rig. * * Places Orion into Main or Sub Rx active state */ int tt565_set_vfo(RIG *rig, vfo_t vfo) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; int vfo_len; char vfobuf[TT565_BUFSIZE]; if (vfo == RIG_VFO_CURR) return RIG_OK; if (vfo == RIG_VFO_MAIN || vfo == RIG_VFO_SUB) { /* Select Sub or Main RX */ vfo_len = sprintf (vfobuf, "*K%c" EOM, vfo == RIG_VFO_SUB ? 'S' : 'M'); return tt565_transaction (rig, vfobuf, vfo_len, NULL, NULL); } priv->vfo_curr = vfo; return RIG_OK; } /** * \param rig must != NULL * \param vfo Set = stored state of current VFO state * \returns RIG_OK */ int tt565_get_vfo(RIG *rig, vfo_t *vfo) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; *vfo = priv->vfo_curr; return RIG_OK; } /** * \param rig must != NULL * \param vfo Rx vfo specifier token * \param split (ignored - why?) * \param tx_vfo Tx vfo specifier token * \returns RIG_OK or < 0 * \brief Set split operating mode * * Sets Main Rx to "vfo"( A or B) , Main Tx to "tx_vfo" (A, B, or N). * \n Sub Rx is set to "None". That should be fixed! */ int tt565_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo) { int cmd_len, retval; char cmdbuf[TT565_BUFSIZE]; cmd_len = sprintf (cmdbuf, "*KV%c%c%c" EOM, which_vfo(rig, vfo), 'N', /* FIXME */ which_vfo(rig, tx_vfo)); retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL, NULL); return retval; } /** * \param c * \returns RIG_VFO_x, x= A, B, or NONE * \brief Translate an Orion command character to internal token form. */ static vfo_t tt2vfo(char c) { switch(c) { case 'A': return RIG_VFO_A; case 'B': return RIG_VFO_B; case 'N': return RIG_VFO_NONE; } return RIG_VFO_NONE; } /** * \param rig must != NULL * \param vfo * \param split Returned with RIG_SPLIT_ON if Tx <> Rx vfo, .._OFF otherwise * \param tx_vfo Returned RIG_VFO_x, signifying selected Tx vfo * \returns RIG_OK or < 0 * \brief Get the current split status and Tx vfo selection. */ int tt565_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo) { int cmd_len, resp_len, retval; char cmdbuf[TT565_BUFSIZE], respbuf[TT565_BUFSIZE]; char ttreceiver; cmd_len = sprintf(cmdbuf, "?KV" EOM); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[2] != 'V' || resp_len < 5) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } ttreceiver = vfo == RIG_VFO_SUB ? respbuf[3] : respbuf[4]; *tx_vfo = tt2vfo(respbuf[5]); *split = ttreceiver == respbuf[5] ? RIG_SPLIT_OFF : RIG_SPLIT_ON; return RIG_OK; } /** * \param rig must != NULL * \param vfo * \param mode * \param width passband in Hz or = RIG_PASSBAND_NORMAL (=0) which gives a nominal value * \brief Set operating mode to RIG_MODE_x with indicated passband width. * * Supported modes x= USB, LSB, CW, CWR, AM, FM, RTTY * \n This applies to currently selected receiver (Main Rx=Tx or Sub Rx) * \sa tt565_set_vfo * * \remarks Note widespread confusion between "VFO" and "Receiver". The Orion * has VFOs A and B which may be mapped to Main and Sub Receivers independently. * But Hamlib may have different ideas! */ int tt565_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { struct rig_state *rs = &rig->state; char ttmode, ttreceiver; int mdbuf_len, retval; char mdbuf[TT565_BUFSIZE]; switch (mode) { case RIG_MODE_USB: ttmode = TT565_USB; break; case RIG_MODE_LSB: ttmode = TT565_LSB; break; case RIG_MODE_CW: ttmode = TT565_CW; break; case RIG_MODE_CWR: ttmode = TT565_CWR; break; case RIG_MODE_AM: ttmode = TT565_AM; break; case RIG_MODE_FM: ttmode = TT565_FM; break; case RIG_MODE_RTTY: ttmode = TT565_RTTY; break; default: rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode %d\n", __FUNCTION__, mode); return -RIG_EINVAL; } if (width == RIG_PASSBAND_NORMAL) width = rig_passband_normal(rig, mode); ttreceiver = which_receiver(rig, vfo); mdbuf_len = sprintf(mdbuf, "*R%cM%c" EOM "*R%cF%d" EOM, ttreceiver, ttmode, ttreceiver, (int)width ); retval = write_block(&rs->rigport, mdbuf, mdbuf_len); return retval; } /** * \param rig must != NULL * \param vfo * \param mode Receives current mode setting, must be != NULL * \param width Receives current bandwidth setting, must be != NULL * \returns RIG_OK or < 0 * \brief Get op. mode and bandwidth for selected vfo * * \remarks Confusion of VFO and Main/Sub TRx/Rx. See tt565_set_mode. */ int tt565_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width) { int cmd_len, resp_len, retval; char cmdbuf[TT565_BUFSIZE], respbuf[TT565_BUFSIZE]; char ttmode, ttreceiver; ttreceiver = which_receiver(rig, vfo); /* Query mode */ cmd_len = sprintf(cmdbuf, "?R%cM" EOM, ttreceiver); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'R' || respbuf[3] != 'M' || resp_len <= 4) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } ttmode = respbuf[4]; switch (ttmode) { case TT565_USB: *mode = RIG_MODE_USB; break; case TT565_LSB: *mode = RIG_MODE_LSB; break; case TT565_CW: *mode = RIG_MODE_CW; break; case TT565_CWR: *mode = RIG_MODE_CWR; break; case TT565_AM: *mode = RIG_MODE_AM; break; case TT565_FM: *mode = RIG_MODE_FM; break; case TT565_RTTY: *mode = RIG_MODE_RTTY; break; default: rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode '%c'\n", __FUNCTION__, ttmode); return -RIG_EPROTO; } /* Query passband width (filter) */ cmd_len = sprintf(cmdbuf, "?R%cF" EOM, ttreceiver); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'R' || respbuf[3] != 'F' || resp_len <= 4) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } *width = atoi(respbuf+4); return RIG_OK; } /** * \param rig must != NULL * \param vfo * \param ts Tuning Step, Hz * \returns RIG_OK or < 0 * \brief Set Tuning Step for VFO A or B. */ int tt565_set_ts(RIG *rig, vfo_t vfo, shortfreq_t ts) { int cmd_len, retval; char cmdbuf[TT565_BUFSIZE]; cmd_len = sprintf(cmdbuf, "*R%cI%d" EOM, which_receiver(rig, vfo), (int)ts); retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL, NULL); return retval; } /** * \param rig must != NULL * \param vfo * \param ts Receives Tuning Step, Hz * \returns RIG_OK or < 0 * \brief Get Tuning Step for VFO A or B. */ int tt565_get_ts(RIG *rig, vfo_t vfo, shortfreq_t *ts) { int cmd_len, resp_len, retval; char cmdbuf[TT565_BUFSIZE], respbuf[TT565_BUFSIZE]; cmd_len = sprintf(cmdbuf, "?R%cI" EOM, which_receiver(rig, vfo)); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'R' || respbuf[3] != 'I' || resp_len <= 4) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } *ts = atoi(respbuf+4); return RIG_OK; } /** * \param rig must != NULL * \param vfo * \param rit Rx incremental tuning, Hz * \returns RIG_OK or < 0 * \brief Set Rx incremental tuning */ int tt565_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit) { int cmd_len, retval; char cmdbuf[TT565_BUFSIZE]; cmd_len = sprintf(cmdbuf, "*R%cR%d" EOM, which_receiver(rig, vfo), (int)rit); retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL, NULL); return retval; } /** * \param rig must != NULL * \param vfo * \param rit Receives Rx incremental tuning, Hz * \returns RIG_OK or < 0 * \brief Get Rx incremental tuning */ int tt565_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit) { int cmd_len, resp_len, retval; char cmdbuf[TT565_BUFSIZE], respbuf[TT565_BUFSIZE]; cmd_len = sprintf(cmdbuf, "?R%cR" EOM, which_receiver(rig, vfo)); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'R' || respbuf[3] != 'R' || resp_len <= 4) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } *rit = atoi(respbuf+4); return RIG_OK; } /** * \param rig must != NULL * \param vfo * \param xit Tx incremental tuning, Hz * \returns RIG_OK or < 0 * \brief Set Tx incremental tuning (Main TRx only) */ int tt565_set_xit(RIG *rig, vfo_t vfo, shortfreq_t xit) { int cmd_len, retval; char cmdbuf[TT565_BUFSIZE]; /* Sub receiver does not contain an XIT setting */ cmd_len = sprintf(cmdbuf, "*R%cX%d" EOM, 'M', (int)xit); retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL, NULL); return retval; } /** * \param rig must != NULL * \param vfo * \param xit Receives Tx incremental tuning, Hz * \returns RIG_OK or < 0 * \brief Get Tx incremental tuning (Main TRx only) */ int tt565_get_xit(RIG *rig, vfo_t vfo, shortfreq_t *xit) { int cmd_len, resp_len, retval; char cmdbuf[TT565_BUFSIZE], respbuf[TT565_BUFSIZE]; cmd_len = sprintf(cmdbuf, "?R%cX" EOM, 'M'); resp_len = sizeof(respbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'R' || respbuf[3] != 'X' || resp_len <= 4) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } *xit = atoi(respbuf+4); return RIG_OK; } /** * \param rig must != NULL * \param vfo * \param ptt RIG_PTT_ON or RIG_PTT_OFF * \returns RIG_OK or < 0 * \brief Set push to talk (Tx on/off) */ int tt565_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt) { struct rig_state *rs = &rig->state; return write_block(&rs->rigport, ptt==RIG_PTT_ON ? "*TK" EOM:"*TU" EOM, 4); } /** * \param rig must != NULL * \param vfo * \param ptt Receives RIG_PTT_ON or RIG_PTT_OFF * \returns RIG_OK or < 0 * \brief Get push to talk (Tx on/off) */ int tt565_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt) { int resp_len, retval; char respbuf[TT565_BUFSIZE]; resp_len = sizeof(respbuf); retval = tt565_transaction (rig, "?S" EOM, 3, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'S' || resp_len < 5) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } *ptt = respbuf[2]=='T' ? RIG_PTT_ON : RIG_PTT_OFF ; return RIG_OK; } /** * \param rig must != NULL * \param reset (not used) * \returns RIG_OK or < 0 * \brief Restart Orion firmware * * Sends an "X" command and listens for reply = "ORION START". This only * seems to test for healthy connection to the firmware. There is no effect * on Orion's state, AFAIK. */ int tt565_reset(RIG *rig, reset_t reset) { int retval, reset_len; char reset_buf[TT565_BUFSIZE]; reset_len = sizeof(reset_buf); retval = tt565_transaction (rig, "X" EOM, 2, reset_buf, &reset_len); if (retval != RIG_OK) return retval; if (!strstr(reset_buf, "ORION START")) { rig_debug(RIG_DEBUG_ERR, "%s: unexpected answer '%s'\n", __FUNCTION__, reset_buf); return -RIG_EPROTO; } return RIG_OK; } /** * \param rig must != NULL * \returns firmware identification string or NULL * \brief Get firmware identification, e.g., "Version 1.372" * * Re-entrancy issue (what else is new?) */ const char *tt565_get_info(RIG *rig) { static char buf[100]; /* FIXME: reentrancy */ int firmware_len, retval; firmware_len = sizeof(buf); retval = tt565_transaction (rig, "?V" EOM, 3, buf, &firmware_len); if (retval != RIG_OK || firmware_len < 8) { rig_debug(RIG_DEBUG_ERR,"%s: ack NG, len=%d\n", __FUNCTION__, firmware_len); return NULL; } buf[firmware_len] = '\0'; return buf; } /** * \param rig must != NULL * \param vfo * \param level A level id token, e.g. RIG_LEVEL_AF * \param val Value for the level, on a scale or via a token * \returns RIG_OK or < 0 * \brief Sets any of Orion's "Level" adjustments * * Unfortunately, "val" type is not well defined. Sometimes it is a float (AF gain), * an integer (RF Atten.), or an enum (RIG_AGC_FAST)... * * Supported Levels and Units * \n -RIG_LEVEL_RFPOWER, float 0.0 - 1.0 * \n -RIG_LEVEL_AGC, int RIG_AGC_x, x= OFF, FAST, MEDIUM, SLOW, USER * \n -RIG_LEVEL_AF, float 0.0 - 1.0 * \n -RIG_LEVEL_IF, passband tuning, int Hz * \n -RIG_LEVEL_RF, IF gain (!), float 0.0 - 1.0 * \n -RIG_LEVEL_ATT, Atten. setting, int dB (we pick 0, 6, 12, or 18 dB) * \n -RIG_LEVEL_PREAMP, Preamp on/off, 0-1 (main Rx only) * \n -RIG_LEVEL_SQL, squelch, float 0.0 - 1.0 * \n -RIG_LEVEL_MICGAIN, float 0.0 - 1.0 * \n -RIG_LEVEL_COMP, speech compression, float 0.0 - 1.0 * \n -RIG_LEVEL_CWPITCH, int Hz * \n -RIG_LEVEL_KEYSPD, int wpm * \n -RIG_LEVEL_NR, noise reduction/blank, float 0.0 - 1.0 * \n -RIG_LEVEL_VOX, vox delay, float x 1/10 second * \n -RIG_LEVEL_VOXGAIN, float 0.0 - 1.0 * \n -RIG_LEVEL_ANTIVOX, float 0.0 - 1.0 * * \n FIXME: cannot support PREAMP and ATT both at same time (make sens though) */ int tt565_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val) { int retval, cmd_len=0, ii; char cmdbuf[TT565_BUFSIZE], cc; switch (level) { case RIG_LEVEL_RFPOWER: cmd_len = sprintf(cmdbuf, "*TP%d" EOM, (int)(val.f*100)); break; case RIG_LEVEL_AGC: switch(val.i) { case RIG_AGC_OFF: cc = 'O'; break; case RIG_AGC_FAST: cc = 'F'; break; case RIG_AGC_MEDIUM: cc = 'M'; break; case RIG_AGC_SLOW: cc = 'S'; break; case RIG_AGC_USER: cc = 'P'; break; default: cc = 'M'; } cmd_len = sprintf(cmdbuf, "*R%cA%c" EOM, which_receiver(rig, vfo), cc); break; case RIG_LEVEL_AF: /* AF Gain, float 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*U%c%d" EOM, which_receiver(rig, vfo), (int)(val.f*255)); break; case RIG_LEVEL_IF: /* This is passband tuning int Hz */ cmd_len = sprintf(cmdbuf, "*R%cP%d" EOM, which_receiver(rig, vfo), val.i); break; case RIG_LEVEL_RF: /* This is IF Gain, float 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*R%cG%d" EOM, which_receiver(rig, vfo), (int)(val.f*100)); break; case RIG_LEVEL_ATT: /* RF Attenuator, int dB */ ii = -1; /* Request 0-5 dB -> 0, 6-11 dB -> 6, etc. */ while ( rig->caps->attenuator[++ii] != RIG_DBLST_END ) { if (rig->caps->attenuator[ii] > val.i) break; } cmd_len = sprintf(cmdbuf, "*R%cT%d" EOM, which_receiver(rig, vfo), ii); break; case RIG_LEVEL_PREAMP: /* Sub receiver does not contain a Preamp */ if (which_receiver(rig, vfo) == 'S') { return -RIG_EINVAL; } /* RF Preamp (main Rx), int 0 or 1 */ cmd_len = sprintf(cmdbuf, "*RME%d" EOM, val.i==0 ? 0 : 1); break; case RIG_LEVEL_SQL: /* Squelch level, float 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*R%cS%d" EOM, which_receiver(rig, vfo), (int)((val.f*127)-127)); break; case RIG_LEVEL_MICGAIN: /* Mic gain, float 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*TM%d" EOM, (int)(val.f*100)); break; case RIG_LEVEL_COMP: /* Speech Processor, float 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*TS%d" EOM, (int)(val.f*9)); break; case RIG_LEVEL_CWPITCH: /* "CWPITCH" is the "Tone" button on the Orion. Manual menu adjustment works down to 100 Hz, but not via computer. int Hz. */ if (val.i > TT565_TONE_MAX) val.i = TT565_TONE_MAX; else if (val.i < TT565_TONE_MIN) val.i = TT565_TONE_MIN; cmd_len = sprintf(cmdbuf, "*CT%d" EOM, val.i); break; case RIG_LEVEL_KEYSPD: /* Keyer speed setting does not imply Keyer = "on". That is a command which should be a hamlib function, but is not. Keyer speed determines the rate of computer sent CW also. */ if (val.i > TT565_CW_MAX) val.i = TT565_CW_MAX; else if (val.i < TT565_CW_MIN) val.i = TT565_CW_MIN; cmd_len = sprintf(cmdbuf, "*CS%d" EOM, val.i); break; case RIG_LEVEL_NR: /* Noise Reduction (blanking) Float 0.0 - 1.0 For some reason NB setting is supported in 1.372, but NR, NOTCH, and AN are not. FOR NOW -- RIG_LEVEL_NR controls the Orion NB setting */ cmd_len = sprintf(cmdbuf, "*R%cNB%d" EOM, which_receiver(rig, vfo), (int)(val.f*9)); break; case RIG_LEVEL_VOX: /* VOX delay, float tenths of seconds */ cmd_len = sprintf(cmdbuf, "*TH%4.2f" EOM, 0.1*val.f); break; case RIG_LEVEL_VOXGAIN: /* Float, 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*TG%d" EOM, (int)(100.0*val.f)); break; case RIG_LEVEL_ANTIVOX: /* Float, 0.0 - 1.0 */ cmd_len = sprintf(cmdbuf, "*TA%d" EOM, (int)(100.0*val.f)); break; default: rig_debug(RIG_DEBUG_ERR,"%s: unsupported level %d\n", __FUNCTION__, level); return -RIG_EINVAL; } retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL,NULL); return retval; } /** * \param rig must be != NULL * \param vfo * \param level identifier for level of interest * \param val Receives level's value, must != NULL * \brief Get the current value of an Orion "level" * * \sa tt565_set_level */ int tt565_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val) { int retval, cmd_len, lvl_len; char cmdbuf[TT565_BUFSIZE],lvlbuf[TT565_BUFSIZE]; /* Optimize: sort the switch cases with the most frequent first */ switch (level) { case RIG_LEVEL_SWR: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?S" EOM, 3, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; /* in Xmit, response is @STFuuuRvvvSwww (or ...Swwww) uuu = 000-100 (apx) fwd watts vvv = 000-100 rev watts www = 256-999 256 * VSWR in Rcv, response is @SRMuuuSvvv uuu = 000-100 (apx) Main S meter vvv = 000-100 (apx) Sub S meter */ if (lvlbuf[1] != 'S' || lvl_len < 5 ) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } if (lvlbuf[2]=='T') { val->f = atof(strchr(lvlbuf+5,'S')+1)/256.0; if (val->f < 1.0) val->f = 9.99; /* high VSWR */ } else val->f = 0.0; /* SWR in Receive = 0.0 */ break; case RIG_LEVEL_RAWSTR: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?S" EOM, 3, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'S' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } if (lvlbuf[2] == 'R') { val->i = atoi(strchr(lvlbuf+3, vfo == RIG_VFO_SUB ? 'S' : 'M')+1); /* check main/sub logic */ } else val->i = 0; /* S-meter in xmit = 0 */ break; case RIG_LEVEL_RFPOWER: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?TP" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'T' || lvlbuf[2] != 'P' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = atof(lvlbuf+3)/100.0; break; case RIG_LEVEL_AGC: cmd_len = sprintf(cmdbuf, "?R%cA" EOM, which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'A' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } switch(lvlbuf[4]) { case 'O': val->i=RIG_AGC_OFF; break; case 'F': val->i=RIG_AGC_FAST; break; case 'M': val->i=RIG_AGC_MEDIUM; break; case 'S': val->i=RIG_AGC_SLOW; break; case 'P': val->i=RIG_AGC_USER; break; default: return -RIG_EPROTO; } break; case RIG_LEVEL_AF: cmd_len = sprintf(cmdbuf, "?U%c" EOM, which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'U' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = atof(lvlbuf+3)/255.0; break; case RIG_LEVEL_IF: cmd_len = sprintf(cmdbuf, "?R%cP" EOM, /* passband tuning */ which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'P' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->i = atoi(lvlbuf+4); break; case RIG_LEVEL_RF: cmd_len = sprintf(cmdbuf, "?R%cG" EOM, which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'G' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = atof(lvlbuf+4)/100.0; break; case RIG_LEVEL_ATT: cmd_len = sprintf(cmdbuf, "?R%cT" EOM, which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'T' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } if (lvlbuf[4] == '0') val->i = 0; else val->i = rig->caps->attenuator[lvlbuf[4]-'1']; break; case RIG_LEVEL_PREAMP: /* Sub receiver does not contain a Preamp */ if (which_receiver(rig, vfo) == 'S') { val->i=0; break; } lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?RME" EOM, 5, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'E' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->i = lvlbuf[4] == '0' ? 0 : rig->caps->preamp[0]; break; case RIG_LEVEL_SQL: cmd_len = sprintf(cmdbuf, "?R%cS" EOM, which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'S' || lvl_len < 5) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = (atof(lvlbuf+4)+127.0)/127.0; break; case RIG_LEVEL_MICGAIN: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?TM" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'T' || lvlbuf[2] != 'M' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = atof(lvlbuf+3)/100.0; break; case RIG_LEVEL_COMP: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?TS" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'T' || lvlbuf[2] != 'S' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = atof(lvlbuf+3)/9.0; break; case RIG_LEVEL_CWPITCH: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?CT" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'C' || lvlbuf[2] != 'T' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->i = atoi(lvlbuf+3); break; case RIG_LEVEL_KEYSPD: lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?CS" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'C' || lvlbuf[2] != 'S' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->i = atoi(lvlbuf+3); break; case RIG_LEVEL_NR: /* RIG_LEVEL_NR controls Orion NB setting - TEMP */ cmd_len = sprintf(cmdbuf, "?R%cNB" EOM, which_receiver(rig, vfo)); lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, cmdbuf, cmd_len, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'R' || lvlbuf[3] != 'N' || lvlbuf[4] != 'B' || lvl_len < 6 ) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = atof(lvlbuf+5)/9.0; /* Note 0-9 -> 0.0 - 1.0 */ break; case RIG_LEVEL_VOX: /* =VOXDELAY, tenths of secs. */ lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?TH" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'T' || lvlbuf[2] != 'H' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = 10.0*atof(lvlbuf+3); break; case RIG_LEVEL_VOXGAIN: /* Float, 0.0 - 1.0 */ lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?TG" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'T' || lvlbuf[2] != 'G' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = 0.01 * atof(lvlbuf+3); break; case RIG_LEVEL_ANTIVOX: /* Float, 0.0 - 1.0 */ lvl_len = sizeof(lvlbuf); retval = tt565_transaction (rig, "?TA" EOM, 4, lvlbuf, &lvl_len); if (retval != RIG_OK) return retval; if (lvlbuf[1] != 'T' || lvlbuf[2] != 'A' || lvl_len < 4) { rig_debug(RIG_DEBUG_ERR,"%s: unexpected answer '%s'\n", __FUNCTION__, lvlbuf); return -RIG_EPROTO; } val->f = 0.01 * atof(lvlbuf+3); break; default: rig_debug(RIG_DEBUG_ERR,"%s: unsupported level %d\n", __FUNCTION__, level); return -RIG_EINVAL; } return RIG_OK; } /** * \param rig !=NULL * \param vfo * \param ch Channel number * \returns RIG_OK * \brief This only sets the current memory channel locally. No Orion I/O. * * Use RIG_OP_TO_VFO and RIG_OP_FROM_VFO to get/store a freq in the channel. * \sa tt565_vfo_op */ int tt565_set_mem(RIG * rig, vfo_t vfo, int ch) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; priv->ch = ch; /* See RIG_OP_TO/FROM_VFO */ return RIG_OK; } /** * \param rig != NULL * \param vfo * \param ch to receive the current channel number * \returns RIG_OK * \brief Get the current memory channel number (only) */ int tt565_get_mem(RIG * rig, vfo_t vfo, int *ch) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; *ch = priv->ch; return RIG_OK; } /** * \param rig != NULL * \param vfo * \param op Operation to perform, a RIG_OP token * \returns RIG_OK or < 0 * \brief perform a RIG_OP operation * * Supported operations: * \n RIG_OP_TO_VFO memory channel to VFO (includes bw, mode, etc) * \n RIG_OP_FROM_VFO stores VFO (& other data) to memory channel * \n RIG_OP_TUNE initiates a tuner cycle (if tuner present) MAY BE BROKEN * \n RIG_OP_UP increment VFO freq by tuning step * \n RIG_OP_DOWN decrement VFO freq by tuning step */ int tt565_vfo_op(RIG * rig, vfo_t vfo, vfo_op_t op) { struct tt565_priv_data *priv = (struct tt565_priv_data *)rig->state.priv; char cmdbuf[TT565_BUFSIZE]; int retval; int cmd_len; switch (op) { case RIG_OP_TO_VFO: case RIG_OP_FROM_VFO: cmd_len = sprintf (cmdbuf, "*K%c%c%d" EOM, op == RIG_OP_TO_VFO ? 'R' : 'W', which_vfo(rig, vfo), priv->ch); break; case RIG_OP_TUNE: strcpy(cmdbuf, "*TTT" EOM); cmd_len = 5; break; case RIG_OP_UP: case RIG_OP_DOWN: cmd_len = sprintf (cmdbuf, "*%cS%c1" EOM, which_vfo(rig, vfo), op == RIG_OP_UP ? '+' : '-'); break; default: rig_debug(RIG_DEBUG_ERR,"%s: Unsupported op %d\n", __FUNCTION__, op); return -RIG_EINVAL; } retval = tt565_transaction (rig, cmdbuf, cmd_len, NULL, NULL); return retval; } /** * \param rig * \param vfo * \param msg A message string (<= 20 char) * \returns RIG_OK * \brief Send a string as morse characters * * Orion keyer must be on for morse, but we do not have a "keyer on" function in * hamlib (yet). Keyer will be forced on. * * Orion can queue up to about 20 characters. * We could batch a longer message into 20 char chunks, but there is no * simple way to tell if message has completed. We could calculate a * duration based on keyer speed and the text that was sent, but * what we really need is a handshake for "message complete". * Without it, you can't easily use the Orion as a code practice machine. * For now, we let the user do the batching. * Note that rig panel is locked up for duration of message. */ int tt565_send_morse(RIG *rig, vfo_t vfo, const char *msg) { int msg_len, retval, ic, cmdl; char morsecmd[8]; static int keyer_set = 0; /*Shouldn't be here!*/ /* Force keyer on. */ if (!keyer_set) { retval = tt565_transaction(rig, "*CK1" EOM, 5, NULL, NULL); if (retval != RIG_OK) return retval; keyer_set = 1; usleep(100000); /* 100 msec - guess */ } msg_len = strlen(msg); if (msg_len > 20) msg_len = 20; /* sanity limit 20 chars */ for (ic = 0; ic < msg_len; ic++) { cmdl = sprintf(morsecmd,"/%c" EOM, msg[ic]); retval = tt565_transaction(rig,morsecmd,cmdl,NULL,NULL); if (retval != RIG_OK) return retval; } return RIG_OK; } /** * \param rig != NULL * \param vfo * \param func Identifier for function to be performed * \param status data for function * \returns RIG_OK or < 0 * \brief Set an Orion "function" * * Note that vfo must == RIG_VFO_CURR * * Supported functions & data * \n RIG_FUNC_TUNER, off/on, 0/1 * \n RIG_FUNC_VOX, off/on, 0/1 * \n RIG_FUNC_LOCK, unlock/lock, 0/1 * \n RIG_FUNC_NB, off/on, 0/1 (sets Orion NB=0 or =4), compare RIG_LEVEL_NR * */ int tt565_set_func(RIG *rig, vfo_t vfo, setting_t func, int status) { char fcmdbuf[TT565_BUFSIZE]; int retval, fcmdlen; if (vfo != RIG_VFO_CURR) return -RIG_EINVAL; switch (func) { case RIG_FUNC_TUNER: fcmdlen = sprintf(fcmdbuf,"*TT%c" EOM, !status ? 0:1); break; case RIG_FUNC_VOX: fcmdlen = sprintf(fcmdbuf,"*TV%c" EOM, !status ? 0:1); break; case RIG_FUNC_LOCK: fcmdlen = sprintf(fcmdbuf,"*%c%c" EOM, which_vfo(rig, vfo), !status ? 'U' : 'L' ); break; case RIG_FUNC_NB: /* NB "on" sets Orion NB=4; "off" -> NB=0. See also RIG_LEVEL_NR which maps to NB setting due to firmware limitation. */ fcmdlen = sprintf(fcmdbuf,"*R%cNB%c" EOM, which_receiver(rig, vfo), !status ? '0' : '4' ); break; default: rig_debug(RIG_DEBUG_ERR,"Unsupported set_func %#x", func); return -RIG_EINVAL; } retval = tt565_transaction(rig, fcmdbuf, fcmdlen, NULL, NULL); if (retval != RIG_OK) return retval; return RIG_OK; } /** * \param rig != NULL * \param vfo must == RIG_VFO_CURR * \param func * \param status receives result of function query * \returns RIG_OK or < 0 * \brief get state of an Orion "function" * * \sa tt565_set_func */ int tt565_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status) { char fcmdbuf[TT565_BUFSIZE], frespbuf[TT565_BUFSIZE]; int retval, fcmdlen, fresplen; if (vfo != RIG_VFO_CURR) return -RIG_EINVAL; switch (func) { case RIG_FUNC_TUNER: fcmdlen = sprintf(fcmdbuf, "?TT" EOM); break; case RIG_FUNC_VOX: fcmdlen = sprintf(fcmdbuf, "?TV" EOM); break; case RIG_FUNC_LOCK: fcmdlen = sprintf(fcmdbuf, "?%cU" EOM, which_vfo(rig, vfo) ); /* needs special treatment */ fresplen = sizeof(frespbuf); retval = tt565_transaction(rig, fcmdbuf, fcmdlen, frespbuf, &fresplen); if (retval != RIG_OK) return retval; /* response is @AL @AU or @BL @BU */ *status = frespbuf[ 2 ] == 'L' ? 1:0; return RIG_OK; case RIG_FUNC_NB: /* Note NB should be a LEVEL for Orion. It is also available through LEVEL_NR */ fcmdlen = sprintf(fcmdbuf, "?R%cNB" EOM, which_receiver(rig, vfo) ); /* needs special treatment */ fresplen = sizeof(frespbuf); retval = tt565_transaction(rig, fcmdbuf, fcmdlen, frespbuf, &fresplen); if (retval != RIG_OK) return retval; /* response is @RxNBn, n=0--9. Return 0 iff receive NB=0 */ *status = frespbuf[ 5 ] == '0' ? 0:1; return RIG_OK; default: rig_debug(RIG_DEBUG_ERR,"Unsupported get_func %#x", func); return -RIG_EINVAL; } fresplen = sizeof(frespbuf); retval = tt565_transaction(rig, fcmdbuf, fcmdlen, frespbuf, &fresplen); if (retval != RIG_OK) return retval; *status = frespbuf[ 3 ] == '1' ? 1:0; return RIG_OK; } /** * \param rig != NULL * \param vfo * \param ant antenna identifier RIG_ANT_1 or RIG_ANT_2 * \returns RIG_OK or < 0 * \brief Antenna selection for Orion * * We support Ant_1 and Ant_2 for M and S receivers. * \n Note that Rx-only antenna (Ant_3?) is not supported at this time. * \n Orion command assigns MSBN (main rtx, sub rx, both, or none) to each ant, * but hamlib wants to assign an ant to rx/tx! * The efficient way would be to keep current config in rig priv area, but we will * ask the rig what its state is each time... */ int tt565_set_ant(RIG * rig, vfo_t vfo, ant_t ant) { char respbuf[TT565_BUFSIZE]; int resp_len, retval; ant_t main_ant, sub_ant; /* First, find out what antenna config is now. */ resp_len = sizeof(respbuf); retval = tt565_transaction (rig, "?KA" EOM, 4, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (resp_len != 7 || respbuf[1] != 'K' || respbuf[2] != 'A') { rig_debug(RIG_DEBUG_ERR,"%s; tt565_set_ant: ?KA NG %s\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } /* respbuf="@KAxxx" * x='M'|'S'|'B'|'N'=main/sub/both/none for ants 1,2,3. * but hardware will not permit all combinations! * respbuf [3,4] can be MS, SM, BN, NB * decode to rx-centric view */ if (respbuf[3] == 'M' || respbuf[3] == 'B') main_ant = RIG_ANT_1; else main_ant = RIG_ANT_2; if (respbuf[3] == 'S' || respbuf[3] == 'B') sub_ant = RIG_ANT_1; else sub_ant = RIG_ANT_2; switch (which_receiver(rig,vfo)) { case 'M': main_ant = ant; break; case 'S': sub_ant = ant; break; default: { /* no change? */ } } /* re-encode ant. settings into command */ if (main_ant == RIG_ANT_1) { if (sub_ant == RIG_ANT_1) { respbuf[3] = 'B'; respbuf[4] = 'N'; } else { respbuf[3] = 'M'; respbuf[4] = 'S'; } } else if (sub_ant == RIG_ANT_2) { respbuf[3] = 'N'; respbuf[4] = 'B'; } else { respbuf[3] = 'S'; respbuf[4] = 'M'; } respbuf[0] = '*'; /* respbuf becomes a store command */ respbuf[5] = 'N'; /* Force no rx on Ant 3 */ respbuf[6] = EOM[0]; respbuf[7] = 0; retval = tt565_transaction (rig, respbuf, 7, NULL, NULL); if (retval != RIG_OK) return retval; return RIG_OK; } /** * \param rig != NULL * \param vfo * \param ant receives antenna identifier * \returns RIG_OK or < 0 * \brief Find what antenna is "attached" to our vfo * * \sa tt565_set_ant */ int tt565_get_ant(RIG *rig, vfo_t vfo, ant_t *ant) { char respbuf[TT565_BUFSIZE]; int resp_len, retval; resp_len = sizeof(respbuf); retval = tt565_transaction(rig, "?KA" EOM, 4, respbuf, &resp_len); if (retval != RIG_OK) return retval; if (respbuf[1] != 'K' || respbuf[2] != 'A' || resp_len != 7) { rig_debug(RIG_DEBUG_ERR,"%s; tt565_get_ant: NG %s\n", __FUNCTION__, respbuf); return -RIG_EPROTO; } /* Look for first occurrence of M or S in ant 1, 2, 3 characters */ if (respbuf[3] == which_receiver(rig,vfo) || respbuf[3] == 'B' ) { *ant = RIG_ANT_1; return RIG_OK; } if (respbuf[4] == which_receiver(rig,vfo) || respbuf[4] == 'B' ) { *ant = RIG_ANT_2; return RIG_OK; } *ant = RIG_ANT_NONE; /* ignore possible RIG_ANT_3 = rx only ant */ return RIG_OK; } /* End of orion.c */ /** @} */