/*
 * hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com)
 *
 * ft857.h - (C) Tomi Manninen 2003 (oh2bns@sral.fi)
 *
 *  ...derived but heavily modified from:
 *
 * ft817.h - (C) Chris Karpinsky 2001 (aa1vl@arrl.net)
 *
 * This shared library provides an API for communicating
 * via serial interface to an FT-817 using the "CAT" interface.
 * The starting point for this code was Frank's ft847 implementation.
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifndef _FT857_H
#define _FT857_H 1

/*
 * No need to wait between written characters.
 */
#define FT857_WRITE_DELAY		0

/*
 * Wait 'delay' milliseconds after writing a command sequence.
 *
 * Setting this to zero means no delay but wait for an acknowledgement
 * from the rig after a command. This is undocumented but seems to work.
 * It's also the most optimal way as long as it works...
 *
 * A non-zero value disables waiting for the ack. Processing a command
 * seems to take about 60 ms so set this to 80 or so to be safe.
 */
#define FT857_POST_WRITE_DELAY		0

/*
 * Read timeout.
 */
#define FT857_TIMEOUT			200

/*
 * The time the TX, RX and FREQ/MODE status are cached (in millisec).
 * This optimises the common case of doing eg. rig_get_freq() and
 * rig_get_mode() in a row.
 *
 * The timeout is deliberately set lower than the time taken to process
 * a single command (~ 60 ms) so that a sequence
 *
 *   rig_get_freq();
 *   rig_set_freq();
 *   rig_get_freq();
 *
 * doesn't return a bogus (cached) value in the last rig_get_freq().
 */
#define FT857_CACHE_TIMEOUT		50

int ft857_set_vfo(RIG *rig, vfo_t vfo);
int ft857_get_vfo(RIG *rig, vfo_t *vfo);

#endif /* _FT857_H */