/* * ft736.c - (C) Stephane Fillod 2004 * * This shared library provides an API for communicating * via serial interface to an FT-736R using the "CAT" interface * * $Id: ft736.c,v 1.3 2006-10-07 15:51:38 csete Exp $ * * This library is free software; you can redistribute it and/or modify * it under the terms of the GNU Library General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include /* String function definitions */ #include /* UNIX standard function definitions */ #include "hamlib/rig.h" #include "serial.h" #include "misc.h" #include "yaesu.h" #define FT736_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_FM) #define FT736_VFOS (RIG_VFO_A) /* TODO: Sat mode ? */ /* TODO: get real measure numbers */ #define FT736_STR_CAL { 2, { \ { 0x30, -60 }, /* S0 -6dB */ \ { 0xad, 60 } /* +60 */ \ } } /* Private helper function prototypes */ static int ft736_open(RIG *rig); static int ft736_close(RIG *rig); static int ft736_set_freq(RIG *rig, vfo_t vfo, freq_t freq); static int ft736_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); static int ft736_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo); static int ft736_set_split_freq(RIG *rig, vfo_t vfo, freq_t freq); static int ft736_set_split_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); static int ft736_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt); static int ft736_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd); static int ft736_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val); static int ft736_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t shift); static int ft736_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs); /* * ft736 rigs capabilities. * Also this struct is READONLY! * * TODO: * - repeater func & offset * - CTCSS & DCS * - AQS */ const struct rig_caps ft736_caps = { .rig_model = RIG_MODEL_FT736R, .model_name = "FT-736R", .mfg_name = "Yaesu", .version = "0.2", .copyright = "LGPL", .status = RIG_STATUS_UNTESTED, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 4800, .serial_rate_max = 4800, .serial_data_bits = 8, .serial_stop_bits = 2, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, /* RTS low, DTR high, and CTS low. */ .write_delay = 30, /* 50ms to be real safe */ .post_write_delay = 0, .timeout = 2000, .retry = 0, .has_get_func = RIG_FUNC_NONE, .has_set_func = RIG_FUNC_NONE, .has_get_level = RIG_LEVEL_RAWSTR, .has_set_level = RIG_LEVEL_NONE, .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .vfo_ops = RIG_OP_NONE, .preamp = { RIG_DBLST_END, }, .attenuator = { RIG_DBLST_END, }, .max_rit = Hz(0), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = RIG_TARGETABLE_FREQ, .transceive = RIG_TRN_OFF, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { RIG_CHAN_END, }, .rx_range_list1 = { {MHz(50), MHz(53.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(144), MHz(145.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(430), MHz(439.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(1240), MHz(1299.99999), FT736_MODES, -1, -1, FT736_VFOS }, RIG_FRNG_END, }, /* Region 1 rx ranges */ .tx_range_list1 = { {MHz(50), MHz(53.99999), FT736_MODES, W(5), W(30), FT736_VFOS }, {MHz(144), MHz(145.99999), FT736_MODES, W(5), W(60), FT736_VFOS }, {MHz(430), MHz(439.99999), FT736_MODES, W(5), W(60), FT736_VFOS }, {MHz(1240), MHz(1299.99999), FT736_MODES, W(5), W(45), FT736_VFOS }, RIG_FRNG_END, }, /* region 1 TX ranges */ .rx_range_list2 = { {MHz(50), MHz(53.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(144), MHz(147.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(220), MHz(224.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(430), MHz(449.99999), FT736_MODES, -1, -1, FT736_VFOS }, {MHz(1240), MHz(1299.99999), FT736_MODES, -1, -1, FT736_VFOS }, RIG_FRNG_END, }, /* Region 2 rx ranges */ .tx_range_list2 = { {MHz(50), MHz(53.99999), FT736_MODES, W(5), W(30), FT736_VFOS }, {MHz(144), MHz(147.99999), FT736_MODES, W(5), W(60), FT736_VFOS }, {MHz(220), MHz(224.99999), FT736_MODES, W(5), W(60), FT736_VFOS }, {MHz(430), MHz(449.99999), FT736_MODES, W(5), W(60), FT736_VFOS }, {MHz(1240), MHz(1299.99999), FT736_MODES, W(5), W(45), FT736_VFOS }, RIG_FRNG_END, }, /* region 2 TX ranges */ .tuning_steps = { {FT736_MODES, Hz(10)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR, kHz(2.2)}, {RIG_MODE_CW, Hz(600)}, {RIG_MODE_FM, kHz(12)}, {RIG_MODE_FM, kHz(8)}, RIG_FLT_END, }, .str_cal = FT736_STR_CAL, .rig_open = ft736_open, .rig_close = ft736_close, .set_freq = ft736_set_freq, .set_mode = ft736_set_mode, .set_ptt = ft736_set_ptt, .get_dcd = ft736_get_dcd, .get_level = ft736_get_level, .set_split_vfo = ft736_set_split_vfo, .set_split_freq = ft736_set_split_freq, .set_split_mode = ft736_set_split_mode, .set_rptr_shift = ft736_set_rptr_shift, .set_rptr_offs = ft736_set_rptr_offs, }; /* * ft736_open routine * */ int ft736_open(RIG *rig) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x00}; rig_debug(RIG_DEBUG_TRACE, "%s called\n",__FUNCTION__); /* send Ext Cntl ON: Activate CAT */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_close(RIG *rig) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x80, 0x80, 0x80, 0x80, 0x80}; rig_debug(RIG_DEBUG_TRACE, "%s called\n",__FUNCTION__); /* send Ext Cntl OFF: Deactivate CAT */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_set_freq(RIG *rig, vfo_t vfo, freq_t freq) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x01}; /* store bcd format in cmd (MSB) */ to_bcd_be(cmd,freq/10,8); /* special case for 1.2GHz band */ if (freq > GHz(1.2)) cmd[0] = (cmd[0] & 0x0f) | 0xc0; /* Frequency set */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } #define MD_LSB 0x00 #define MD_USB 0x01 #define MD_CW 0x02 #define MD_CWR 0x03 #define MD_AM 0x04 #define MD_FM 0x08 int ft736_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x07}; unsigned char md; /* * translate mode from generic to ft736 specific */ switch(mode) { case RIG_MODE_CW: md = MD_CW; break; case RIG_MODE_CWR: md = MD_CWR; break; case RIG_MODE_USB: md = MD_USB; break; case RIG_MODE_LSB: md = MD_LSB; break; case RIG_MODE_FM: md = MD_FM; break; case RIG_MODE_AM: md = MD_AM; break; default: return -RIG_EINVAL; /* sorry, wrong MODE */ } if (width != RIG_PASSBAND_NORMAL && width < rig_passband_normal(rig, mode)) { md |= 0x80; } cmd[0] = md; /* Mode set */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x8e}; /* * this can be misleading as Yaesu call it "Full duplex" * or "sat mode", and split Yaesu terms is repeater shift. */ cmd[4] = split == RIG_SPLIT_ON ? 0x0e : 0x8e; return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_set_split_freq(RIG *rig, vfo_t vfo, freq_t freq) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x1e}; /* store bcd format in cmd (MSB) */ to_bcd_be(cmd,freq/10,8); /* special case for 1.2GHz band */ if (freq > GHz(1.2)) cmd[0] = (cmd[0] & 0x0f) | 0xc0; /* Frequency set */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_set_split_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x27}; unsigned char md; /* * translate mode from generic to ft736 specific */ switch(mode) { case RIG_MODE_CW: md = MD_CW; break; case RIG_MODE_CWR: md = MD_CWR; break; case RIG_MODE_USB: md = MD_USB; break; case RIG_MODE_LSB: md = MD_LSB; break; case RIG_MODE_FM: md = MD_FM; break; case RIG_MODE_AM: md = MD_AM; break; default: return -RIG_EINVAL; /* sorry, wrong MODE */ } if (width != RIG_PASSBAND_NORMAL && width < rig_passband_normal(rig, mode)) { md |= 0x80; } cmd[0] = md; /* Mode set */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x88}; cmd[4] = ptt == RIG_PTT_ON ? 0x08 : 0x88; /* Tx/Rx set */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xe7}; int retval; serial_flush(&rig->state.rigport); retval = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); if (retval < 0) return retval; /* read back the 1 byte */ retval = read_block(&rig->state.rigport, (char *) cmd, 5); if (retval < 1) { rig_debug(RIG_DEBUG_ERR,"%s: read squelch failed %d\n", __FUNCTION__,retval); return retval < 0 ? retval : -RIG_EIO; } *dcd = cmd[0] == 0x00 ? RIG_DCD_OFF : RIG_DCD_ON; return RIG_OK; } int ft736_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xf7}; int retval; if (level != RIG_LEVEL_RAWSTR) return -RIG_EINVAL; serial_flush(&rig->state.rigport); /* send Test S-meter cmd to rig */ retval = write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); if (retval < 0) return retval; /* read back the 1 byte */ retval = read_block(&rig->state.rigport, (char *) cmd, 5); if (retval < 1) { rig_debug(RIG_DEBUG_ERR,"%s: read meter failed %d\n", __FUNCTION__,retval); return retval < 0 ? retval : -RIG_EIO; } val->i = cmd[0]; return RIG_OK; } int ft736_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t shift) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x88}; switch (shift) { case RIG_RPT_SHIFT_NONE: cmd[4] = 0x88; break; case RIG_RPT_SHIFT_MINUS: cmd[4] = 0x09; break; case RIG_RPT_SHIFT_PLUS: cmd[4] = 0x49; break; default: return -RIG_EINVAL; } return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); } int ft736_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t offs) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0xf9}; /* store bcd format in cmd (MSB) */ to_bcd_be(cmd,offs,8); /* Offset set */ return write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); }