/*
 *  Hamlib TEnTenc backend - RX-320 PC-Radio capabilities
 *  Copyright (c) 2001 by Stephane Fillod
 *
 *		$Id: rx320.c,v 1.1 2001-07-14 16:42:48 f4cfe Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <stdio.h>   /* Standard input/output definitions */
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */
#include <fcntl.h>   /* File control definitions */
#include <errno.h>   /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>

#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "tentec.h"


#define RX320_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)

#define RX320_LEVELS (RIG_LEVEL_AGC|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)

#define RX320_VFO (RIG_VFO_A)

/* 
 * a bit coarse, but I don't have a RX320, and the manual is not
 * verbose on the subject. Please test it and report! --SF
 */
#define RX320_STR_CAL { 2, { \
		{      0, -60 }, \
		{  10000,  20 }, \
	} }

static const struct tentec_priv_caps rx320_priv_caps = {
		RX320_STR_CAL
};

/*
 * rx320 receiver capabilities.
 *
 * protocol is documented at 
 *		http://www.tentec.com/rx320prg.zip
 *
 * TODO:
 */
const struct rig_caps rx320_caps = {
rig_model: RIG_MODEL_RX320,
model_name:"RX-320",
mfg_name: "Ten-Tec",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_PCRECEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 1200,
serial_rate_max: 1200,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,

has_get_func: RIG_FUNC_NONE,
has_set_func: RIG_FUNC_NONE,
has_get_level: RX320_LEVELS,
has_set_level: RIG_LEVEL_SET(RX320_LEVELS),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,
level_gran: {},                 /* FIXME: granularity */
parm_gran: {},
ctcss_list: NULL,
dcs_list: NULL,
preamp:  { RIG_DBLST_END },
attenuator:  { RIG_DBLST_END },
max_rit: Hz(0),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
transceive: RIG_TRN_OFF,
bank_qty:  0,
chan_desc_sz: 0,

chan_list: {
			RIG_CHAN_END,
		},

rx_range_list1: { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: {
	{kHz(100),MHz(30),RX320_MODES,-1,-1,RX320_VFO},
	RIG_FRNG_END,
  },
tx_range_list2: { RIG_FRNG_END, },
tuning_steps: {
	 {RX320_MODES,10},	/* FIXME: add other ts */
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
filters: {
		{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.5)},
		{RIG_MODE_AM, kHz(6)},
		RIG_FLT_END,
	},
priv: (void*)&rx320_priv_caps,

rig_init: tentec_init,
rig_cleanup: tentec_cleanup,
set_freq: tentec_set_freq,
get_freq: tentec_get_freq,
set_mode: tentec_set_mode,
get_mode: tentec_get_mode,
set_level: tentec_set_level,
get_level: tentec_get_level,
get_info: tentec_get_info,

};

/*
 * Function definitions below
 */