/* * Hamlib CI-V backend - description of IC-910 (VHF/UHF All-Mode Transceiver) * Contributed by Francois Retief * Copyright (c) 2000-2010 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "misc.h" #include "icom.h" #include "icom_defs.h" #include "frame.h" #include "idx_builtin.h" /* * It seems some IC910 out there have weird firmware. Uncomment the following * if your modes are wrong, and please report to hamlib-developer maillist * with firmware number. That'd be interesting to have a word from Icom * on this subject, and if firmware updates are possible. */ #ifdef HAVE_WEIRD_IC910_MODES static int ic910_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { /* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */ if (mode == RIG_MODE_FM) { mode = RIG_MODE_RTTY; } return icom_set_mode(rig, vfo, mode, width); } static int ic910_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width) { /* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */ int retval = icom_get_mode(rig, vfo, mode, width); if (*mode == RIG_MODE_RTTY) { *mode = RIG_MODE_FM; } return retval; } #endif /* HAVE_WEIRD_IC910_MODES */ /* * This function does the special bandwidth coding for IC-910 * (1 - normal, 2 - narrow) */ static int ic910_r2i_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width, unsigned char *md, signed char *pd) { int err; err = rig2icom_mode(rig, vfo, mode, width, md, pd); if (*pd == PD_NARROW_3) { *pd = PD_NARROW_2; } return err; } #define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM) #define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM) #define IC910_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM|RIG_VFO_MAIN_A|RIG_VFO_MAIN_B|RIG_VFO_SUB_A|RIG_VFO_SUB_B) #define IC910_SCAN_OPS (RIG_SCAN_MEM) #define IC910_VFO_OPS (RIG_OP_FROM_VFO| \ RIG_OP_TO_VFO| \ RIG_OP_CPY| \ RIG_OP_MCL| \ RIG_OP_XCHG) #define IC910_FUNC_ALL (RIG_FUNC_NB| \ RIG_FUNC_NR| \ RIG_FUNC_ANF| \ RIG_FUNC_TONE| \ RIG_FUNC_TSQL| \ RIG_FUNC_COMP| \ RIG_FUNC_VOX| \ RIG_FUNC_FBKIN| \ RIG_FUNC_AFC| \ RIG_FUNC_SATMODE| \ RIG_FUNC_SCOPE) #define IC910_LEVEL_ALL (RIG_LEVEL_AF| \ RIG_LEVEL_RF| \ RIG_LEVEL_SQL| \ RIG_LEVEL_IF| \ RIG_LEVEL_NR| \ RIG_LEVEL_CWPITCH| \ RIG_LEVEL_RFPOWER| \ RIG_LEVEL_MICGAIN| \ RIG_LEVEL_KEYSPD| \ RIG_LEVEL_COMP| \ RIG_LEVEL_VOXGAIN| \ RIG_LEVEL_VOXDELAY| \ RIG_LEVEL_ANTIVOX| \ RIG_LEVEL_ATT| \ RIG_LEVEL_PREAMP) #define IC910_STR_CAL UNKNOWN_IC_STR_CAL /* FIXME */ static const struct icom_priv_caps ic910_priv_caps = { 0x60, /* default address */ 0, /* 731 mode */ 1, /* no XCHG to avoid display flicker */ ic910_ts_sc_list, .r2i_mode = ic910_r2i_mode }; int ic910_set_func(RIG *rig, vfo_t vfo, setting_t func, int status) { switch (func) { case RIG_FUNC_SCOPE: return icom_set_raw(rig, C_CTL_MEM, S_MEM_BANDSCOPE, 0, NULL, 1, status ? 1 : 0); case RIG_FUNC_SATMODE: return icom_set_raw(rig, C_CTL_MEM, S_MEM_SATMODE910, 0, NULL, 1, status ? 1 : 0); default: return icom_set_func(rig, vfo, func, status); } } int ic910_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status) { switch (func) { case RIG_FUNC_SCOPE: return icom_get_raw(rig, C_CTL_MEM, S_MEM_BANDSCOPE, 0, NULL, status); case RIG_FUNC_SATMODE: return icom_get_raw(rig, C_CTL_MEM, S_MEM_SATMODE910, 0, NULL, status); default: return icom_get_func(rig, vfo, func, status); } } int ic910_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val) { rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (level) { case RIG_LEVEL_VOXDELAY: return icom_set_level_raw(rig, level, C_CTL_MEM, S_MEM_VOXDELAY, 0, NULL, 1, val); default: return icom_set_level(rig, vfo, level, val); } } int ic910_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val) { rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (level) { case RIG_LEVEL_VOXDELAY: return icom_get_level_raw(rig, level, C_CTL_MEM, S_MEM_VOXDELAY, 0, NULL, val); default: return icom_get_level(rig, vfo, level, val); } } const struct rig_caps ic910_caps = { RIG_MODEL(RIG_MODEL_IC910), .model_name = "IC-910", .mfg_name = "Icom", .version = BACKEND_VER ".1", .copyright = "LGPL", .status = RIG_STATUS_STABLE, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = IC910_FUNC_ALL, .has_set_func = IC910_FUNC_ALL | RIG_FUNC_RESUME, .has_get_level = IC910_LEVEL_ALL | (RIG_LEVEL_RAWSTR), .has_set_level = IC910_LEVEL_ALL, .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .level_gran = { // cppcheck-suppress * [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, [LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } }, }, .parm_gran = {}, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 20, RIG_DBLST_END, }, .attenuator = { 20, RIG_DBLST_END, }, .max_rit = Hz(0), /* SSB,CW: +-1.0kHz FM: +-5.0kHz */ .max_xit = Hz(0), .max_ifshift = Hz(0), /* 1.2kHz manual knob */ // .targetable_vfo = RIG_TARGETABLE_FREQ, .vfo_ops = IC910_VFO_OPS, .scan_ops = IC910_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 99, RIG_MTYPE_MEM }, { 100, 105, RIG_MTYPE_EDGE }, { 106, 106, RIG_MTYPE_CALL }, RIG_CHAN_END, }, .rx_range_list1 = { /* USA */ {MHz(144), MHz(148), IC910_MODES, -1, -1, IC910_VFO_ALL}, {MHz(430), MHz(450), IC910_MODES, -1, -1, IC910_VFO_ALL}, {MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { {MHz(144), MHz(148), IC910_MODES, W(5), W(100), IC910_VFO_ALL}, {MHz(430), MHz(450), IC910_MODES, W(5), W(75), IC910_VFO_ALL}, {MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL}, RIG_FRNG_END, }, .rx_range_list2 = { /* Europe */ {MHz(144), MHz(146), IC910_MODES, -1, -1, IC910_VFO_ALL}, {MHz(430), MHz(440), IC910_MODES, -1, -1, IC910_VFO_ALL}, {MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { {MHz(144), MHz(146), IC910_MODES, W(5), W(100), IC910_VFO_ALL}, {MHz(430), MHz(440), IC910_MODES, W(5), W(75), IC910_VFO_ALL}, {MHz(1240), MHz(1300), IC910_MODES, -1, -1, IC910_VFO_ALL}, RIG_FRNG_END, }, .tuning_steps = { {RIG_MODE_SSB | RIG_MODE_CW, 1}, {RIG_MODE_SSB | RIG_MODE_CW, 10}, {RIG_MODE_SSB | RIG_MODE_CW, 50}, {RIG_MODE_SSB | RIG_MODE_CW, 100}, {RIG_MODE_FM, kHz(0.1)}, {RIG_MODE_FM, kHz(5)}, {RIG_MODE_FM, kHz(6.25)}, {RIG_MODE_FM, kHz(10)}, {RIG_MODE_FM, kHz(12.5)}, {RIG_MODE_FM, kHz(20)}, {RIG_MODE_FM, kHz(25)}, {RIG_MODE_FM, kHz(100)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_CW | RIG_MODE_SSB, kHz(2.3)}, /* builtin */ {RIG_MODE_CW, Hz(600)}, /* with optional FL-132/Fl133 CW filters */ {RIG_MODE_FM, kHz(15)}, /* builtin */ {RIG_MODE_FM, kHz(6)}, /* builtin */ RIG_FLT_END, }, .str_cal = IC910_STR_CAL, .priv = &ic910_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .get_freq = icom_get_freq, .set_freq = icom_set_freq, #ifdef HAVE_WEIRD_IC910_MODES .get_mode = ic910_get_mode, .set_mode = ic910_set_mode, #else .get_mode = icom_get_mode, .set_mode = icom_set_mode, #endif .set_ptt = icom_set_ptt, .get_ptt = icom_get_ptt, .set_vfo = icom_set_vfo, .get_ts = icom_get_ts, .set_ts = icom_set_ts, .get_func = ic910_get_func, .set_func = ic910_set_func, .get_level = ic910_get_level, .set_level = ic910_set_level, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .get_dcd = icom_get_dcd, .decode_event = icom_decode_event, .rig_open = icom_rig_open, .rig_close = icom_rig_close, .set_split_vfo = icom_set_split_vfo, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_freq_mode = icom_set_split_freq_mode, .get_split_freq_mode = icom_get_split_freq_mode, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_rptr_shift = icom_set_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, };