/* * Hamlib CI-V backend - description of IC-2730 and variations * Copyright (c) 2015 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #include #include #include "hamlib/rig.h" #include "idx_builtin.h" #include "icom.h" #define IC2730_MODES (RIG_MODE_FM) #define IC2730_ALL_RX_MODES (RIG_MODE_AM|IC2730_MODES) #define IC2730_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB) #define IC2730_SCAN_OPS RIG_SCAN_NONE #define IC2730_VFO_OPS RIG_OP_NONE #define IC2730_FUNC_ALL ( \ RIG_FUNC_TONE| \ RIG_FUNC_TSQL| \ RIG_FUNC_VOX) #define IC2730_LEVEL_ALL (RIG_LEVEL_AF| \ RIG_LEVEL_SQL| \ RIG_LEVEL_RFPOWER| \ RIG_LEVEL_MICGAIN| \ RIG_LEVEL_VOXGAIN) #define IC2730_PARM_ALL RIG_PARM_NONE /* * FIXME: real measurement */ #define IC2730_STR_CAL UNKNOWN_IC_STR_CAL static const struct icom_priv_caps ic2730_priv_caps = { 0x90, /* default address */ 0, /* 731 mode */ 1, /* no XCHG */ }; const struct rig_caps ic2730_caps = { RIG_MODEL(RIG_MODEL_IC2730), .model_name = "IC-2730", .mfg_name = "Icom", .version = BACKEND_VER ".0", .copyright = "LGPL", .status = RIG_STATUS_UNTESTED, .rig_type = RIG_TYPE_MOBILE, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 4800, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = IC2730_FUNC_ALL, .has_set_func = IC2730_FUNC_ALL, .has_get_level = IC2730_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC2730_LEVEL_ALL), .has_get_parm = IC2730_PARM_ALL, .has_set_parm = IC2730_PARM_ALL, .level_gran = { // cppcheck-suppress * [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .ctcss_list = common_ctcss_list, .dcs_list = full_dcs_list, .preamp = { RIG_DBLST_END, }, .attenuator = { RIG_DBLST_END, }, .max_rit = Hz(0), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC2730_VFO_OPS, .scan_ops = IC2730_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { // There's no memory support through CI-V, // but there is a clone mode apart. RIG_CHAN_END, }, .rx_range_list1 = { {MHz(118), MHz(174), IC2730_ALL_RX_MODES, -1, -1, IC2730_VFO_ALL}, {MHz(375), MHz(550), IC2730_ALL_RX_MODES, -1, -1, IC2730_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { {MHz(144), MHz(146), IC2730_MODES, W(5), W(25), IC2730_VFO_ALL}, {MHz(430), MHz(440), IC2730_MODES, W(5), W(25), IC2730_VFO_ALL}, RIG_FRNG_END, }, .rx_range_list2 = { {MHz(118), MHz(174), IC2730_ALL_RX_MODES, -1, -1, IC2730_VFO_ALL}, {MHz(375), MHz(550), IC2730_ALL_RX_MODES, -1, -1, IC2730_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { {MHz(144), MHz(148), IC2730_MODES, W(5), W(50), IC2730_VFO_ALL}, {MHz(430), MHz(450), IC2730_MODES, W(5), W(50), IC2730_VFO_ALL}, RIG_FRNG_END, }, .tuning_steps = { // Rem: no support for changing tuning step {IC2730_ALL_RX_MODES, kHz(5)}, {IC2730_ALL_RX_MODES, kHz(6.25)}, // The 8.33 kHz step is not selectable, depending on the operating band or mode. {IC2730_ALL_RX_MODES, kHz(8.33)}, {IC2730_ALL_RX_MODES, kHz(10)}, {IC2730_ALL_RX_MODES, 12500}, {IC2730_ALL_RX_MODES, kHz(15)}, {IC2730_ALL_RX_MODES, kHz(20)}, {IC2730_ALL_RX_MODES, kHz(25)}, {IC2730_ALL_RX_MODES, kHz(30)}, {IC2730_ALL_RX_MODES, kHz(50)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_FM | RIG_MODE_AM, kHz(12)}, {RIG_MODE_FM | RIG_MODE_AM, kHz(6)}, RIG_FLT_END, }, .str_cal = IC2730_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void *)& ic2730_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = icom_rig_open, .rig_close = icom_rig_close, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .set_powerstat = icom_set_powerstat, .get_powerstat = icom_get_powerstat, .decode_event = icom_decode_event, .set_func = icom_set_func, .get_func = icom_get_func, .set_level = icom_set_level, .get_level = icom_get_level, .set_ptt = icom_set_ptt, .get_ptt = icom_get_ptt, .get_dcd = icom_get_dcd, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_dcs_sql = icom_set_dcs_code, .get_dcs_sql = icom_get_dcs_code, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_get_split_vfo, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .hamlib_check_rig_caps = "HAMLIB_CHECK_RIG_CAPS" };