/*
 *  Hamlib Rotator backend - SDR-1000
 *  Copyright (c) 2003-2004 by Stephane Fillod
 *
 *	$Id: sdr1k.c,v 1.6 2004-05-17 21:09:42 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */
#include <math.h>

#include "hamlib/rig.h"
#include "serial.h"
#include "misc.h"
#include "bandplan.h"
#include "register.h"

#include "sdr1k.h"

static int sdr1k_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int sdr1k_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int sdr1k_reset(RIG *rig, reset_t reset);
static int sdr1k_init(RIG *rig);
static int sdr1k_open(RIG *rig);
static int sdr1k_close(RIG *rig);
static int sdr1k_cleanup(RIG *rig);
static int sdr1k_set_ptt (RIG *rig, vfo_t vfo, ptt_t ptt);
static int sdr1k_set_level (RIG *rig, vfo_t vfo, setting_t level, value_t val);

typedef enum { L_EXT = 0, L_BAND = 1, L_DDS0 = 2, L_DDS1 = 3 } latch_t;

#define TR	0x40
#define MUTE	0x80
#define GAIN	0x80
#define WRB	0x40
#define RESET	0x80

/* DDS Control Constants */
#define COMP_PD		0x10	/* DDS Comparator power down */
#define DIG_PD		0x01	/* DDS Digital Power down */
#define BYPASS_PLL	0x20	/* Bypass DDS PLL */
#define INT_IOUD	0x01	/* Internal IO Update */
#define OSK_EN		0x20	/* Offset Shift Keying enable */
#define OSK_INT		0x10	/* Offset Shift Keying */
#define BYPASS_SINC	0x40	/* Bypass Inverse Sinc Filter */
#define PLL_RANGE	0x40	/* Set PLL Range */

static int write_latch (RIG *rig, latch_t which, unsigned value, unsigned mask);
static int dds_write_reg (RIG *rig, unsigned addr, unsigned data);
static int set_bit (RIG *rig, latch_t reg, unsigned bit, unsigned state);


#define DEFAULT_XTAL MHz(200)
#define DEFAULT_PLL_MULT 1
#define DEFAULT_DAC_MULT 4095

struct sdr1k_priv_data {
  unsigned	shadow[4];	/* shadow latches */
  freq_t	dds_freq;	/* current freq */
  freq_t	xtal;		/* base XTAL */
  int	pll_mult;		/* PLL mult */
};


#define SDR1K_FUNC  RIG_FUNC_MUTE
#define SDR1K_LEVEL RIG_LEVEL_PREAMP
#define SDR1K_PARM  RIG_PARM_NONE

#define SDR1K_MODES (RIG_MODE_NONE)

#define SDR1K_VFO RIG_VFO_A

#define SDR1K_ANTS 0


/* ************************************************************************* */
/*
 * http://www.flex-radio.com
 * SDR-1000 rig capabilities.
 *
 *
 * TODO: RIG_FUNC_MUTE, set_external_pin?
 *
 *    def set_mute (self, mute = 1):
 *      self.set_bit(1, 7, mute)
 *
 *    def set_unmute (self):
 *      self.set_bit(1, 7, 0)
 *
 *    def set_external_pin (self, pin, on = 1):
 *      assert (pin < 8 and pin > 0), "Out of range 1..7"
 *      self.set_bit(0, pin-1, on)
 *
 *    def read_input_pin
 *
 *    set_conf(XTAL,PLL_mult,spur_red)
 *
 *    What about IOUD_Clock?
 */

const struct rig_caps sdr1k_rig_caps = {
  .rig_model =      RIG_MODEL_SDR1000,
  .model_name =     "SDR-1000",
  .mfg_name =       "Flex-radio",
  .version =        "0.1.2",
  .copyright = 	    "LGPL",
  .status =         RIG_STATUS_NEW,
  .rig_type =       RIG_TYPE_TUNER,
  .targetable_vfo = 	 0,
  .ptt_type =       RIG_PTT_RIG,
  .dcd_type =       RIG_DCD_NONE,
  .port_type =      RIG_PORT_PARALLEL,

  .has_get_func =   SDR1K_FUNC,
  .has_set_func =   SDR1K_FUNC,
  .has_get_level =  SDR1K_LEVEL,
  .has_set_level =  RIG_LEVEL_SET(SDR1K_LEVEL),
  .has_get_parm = 	 SDR1K_PARM,
  .has_set_parm = 	 RIG_PARM_SET(SDR1K_PARM),
  .chan_list = 	 {
			RIG_CHAN_END,
		 },
  .scan_ops = 	 RIG_SCAN_NONE,
  .vfo_ops = 	 RIG_OP_NONE,
  .transceive =     RIG_TRN_OFF,
  .attenuator =     { RIG_DBLST_END, },
  .preamp = 	 { 14, RIG_DBLST_END, },

  .rx_range_list1 =  { {.start=Hz(1),.end=MHz(65),.modes=SDR1K_MODES,
		    .low_power=-1,.high_power=-1,SDR1K_VFO},
		    RIG_FRNG_END, },
  .tx_range_list1 =  {
	  	/* restricted to ham band */
		FRQ_RNG_HF(1,SDR1K_MODES, W(1),W(1),SDR1K_VFO,SDR1K_ANTS),
		FRQ_RNG_6m(1,SDR1K_MODES, W(1),W(1),SDR1K_VFO,SDR1K_ANTS),
		RIG_FRNG_END, },

  .rx_range_list2 =  { {.start=Hz(1),.end=MHz(65),.modes=SDR1K_MODES,
		    .low_power=-1,.high_power=-1,SDR1K_VFO},
		    RIG_FRNG_END, },
  .tx_range_list2 =  {
	  	/* restricted to ham band */
		FRQ_RNG_HF(2,SDR1K_MODES, W(1),W(1),SDR1K_VFO,SDR1K_ANTS),
		FRQ_RNG_6m(2,SDR1K_MODES, W(1),W(1),SDR1K_VFO,SDR1K_ANTS),
		RIG_FRNG_END, },

  .tuning_steps =  { {SDR1K_MODES,1},
			RIG_TS_END,
  },
  .priv =  NULL,	/* priv */

  .rig_init =     sdr1k_init,
  .rig_open =     sdr1k_open,
  .rig_close =    sdr1k_close,
  .rig_cleanup =  sdr1k_cleanup,

  .set_freq =     sdr1k_set_freq,
  .get_freq =     sdr1k_get_freq,
  .set_ptt  =     sdr1k_set_ptt,
  .reset    =     sdr1k_reset,
  .set_level=     sdr1k_set_level,
//  .set_func =     sdr1k_set_func,

};


/* ************************************************************************* */

DECLARE_INITRIG_BACKEND(flexradio)
{
	rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __FUNCTION__);

	rig_register(&sdr1k_rig_caps);

	return RIG_OK;
}

/* ************************************************************************* */

int sdr1k_init(RIG *rig)
{
	struct sdr1k_priv_data *priv;

	priv = (struct sdr1k_priv_data*)malloc(sizeof(struct sdr1k_priv_data));
	if (!priv) {
		/* whoops! memory shortage! */
		return -RIG_ENOMEM;
	}

	priv->dds_freq = RIG_FREQ_NONE;
	priv->xtal = DEFAULT_XTAL;
	priv->pll_mult = DEFAULT_PLL_MULT;

	rig->state.priv = (void*)priv;

	return RIG_OK;
}

static void pdelay(RIG *rig)
{
	unsigned char r;
	par_read_data(&rig->state.rigport, &r);	/* ~1us */
}

int sdr1k_open(RIG *rig)
{
	struct sdr1k_priv_data *priv = (struct sdr1k_priv_data *)rig->state.priv;

	priv->shadow[0] = 0;
	priv->shadow[1] = 0;
	priv->shadow[2] = 0;
	priv->shadow[3] = 0;

	sdr1k_reset(rig, 1);

	return RIG_OK;
}

int sdr1k_close(RIG *rig)
{
	/* TODO: release relays? */

	return RIG_OK;
}

int sdr1k_cleanup(RIG *rig)
{
	struct sdr1k_priv_data *priv = (struct sdr1k_priv_data *)rig->state.priv;

	if (priv) {
		free(priv);
	}
	rig->state.priv = NULL;

	return RIG_OK;
}

static int set_band(RIG *rig, freq_t freq)
{
	int band, ret;

	/* set_band */
        if (freq <= MHz(2.25))
		band = 0;
	else if ( freq <= MHz(5.5))
		band = 1;
	else if (freq <= MHz(11))
		band = 3;    /* due to wiring mistake on board */
	else if (freq <= MHz(22))
		band = 2;    /* due to wiring mistake on board */
	else if (freq <= MHz(37.5))
		band = 4;
	else
		band = 5;

	ret = write_latch (rig, L_BAND, 1 << band, 0x3f);

	rig_debug(RIG_DEBUG_VERBOSE, "%s %lld band %d\n", __FUNCTION__, (long long)freq, band);

	return ret;
}

/*
 * set DDS frequency.
 * NB: due to spur reduction, effective frequency might not be the expected one
 */
int sdr1k_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
	struct sdr1k_priv_data *priv = (struct sdr1k_priv_data *)rig->state.priv;
	int i;
	double ftw;
	double DDS_step_size;
	freq_t frqval;
	int spur_red = 1;
	int ret;

	ret = set_band(rig, freq);
	if (ret != RIG_OK)
		return ret;

	/* Calculate DDS step for spu reduction
	 * DDS steps = 3051.7578125Hz
	 */
	DDS_step_size = ((double)priv->xtal * priv->pll_mult ) / 65536;
	rig_debug(RIG_DEBUG_VERBOSE, "%s DDS step size %g %g %g\n", __FUNCTION__, DDS_step_size, (double)freq / DDS_step_size,
			rint((double)freq / DDS_step_size));
	if (spur_red)
		frqval = (freq_t) (DDS_step_size * rint((double)freq / DDS_step_size));
	else
		frqval = freq;

	rig_debug(RIG_DEBUG_VERBOSE, "%s curr %lld frqval %lld\n", __FUNCTION__, (long long)freq, (long long)frqval);

	if (priv->dds_freq == frqval) {
		return RIG_OK;
	}

	/*** */
	ftw = (double)frqval / priv->xtal ;

	for (i = 0; i<6; i++) {
		unsigned word;

		if (spur_red && i==2)
			word = 128;
		else if (spur_red && i>2)
			word = 0;
		else {
			word = (unsigned)(ftw * 256);
			ftw = ftw*256 - word;
		}
		rig_debug(RIG_DEBUG_TRACE, "DDS %d [%02x]\n", i, word);

		ret = dds_write_reg (rig, 4+i, word);
		if (ret != RIG_OK)
			return ret;
	}

	priv->dds_freq = frqval;

	return ret;
}

int sdr1k_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
	struct sdr1k_priv_data *priv = (struct sdr1k_priv_data *)rig->state.priv;

	*freq = priv->dds_freq;
	rig_debug(RIG_DEBUG_TRACE,"%s: %lld\n", __FUNCTION__, (long long)priv->dds_freq);

	return RIG_OK;
}

/* Set DAC multiplier value */
static int DAC_mult(RIG *rig, unsigned mult)
{
	rig_debug(RIG_DEBUG_TRACE, "DAC [%02x,%02x]\n", mult>>8, mult&0xff);

	/* Output Shape Key I Mult */
	dds_write_reg (rig, 0x21, mult >> 8);
	dds_write_reg (rig, 0x22, mult & 0xff);

	/* Output Shape Key Q Mult */
	dds_write_reg (rig, 0x23, mult >> 8);
	dds_write_reg (rig, 0x24, mult & 0xff);

	return RIG_OK;
}

int sdr1k_reset (RIG *rig, reset_t reset)
{
  /* Reset all Latches (relays off) */
  write_latch (rig, L_BAND, 0x00, 0xff);
  write_latch (rig, L_DDS1, 0x00, 0xff);
  write_latch (rig, L_DDS0, 0x00, 0xff);
  write_latch (rig, L_EXT,  0x00, 0xff);

  /* Reset DDS */
  write_latch (rig, L_DDS1, RESET|WRB, 0xff);	/* reset the DDS chip */
  write_latch (rig, L_DDS1, WRB, 0xff);		/* leave WRB high */

  dds_write_reg (rig, 0x1d, COMP_PD);		/* Power down comparator */
  /* TODO: add PLL multiplier property and logic */
  dds_write_reg (rig, 0x1e, BYPASS_PLL);	/* Bypass PLL */

  dds_write_reg (rig, 0x20, BYPASS_SINC|OSK_EN);/* Bypass Inverse Sinc and enable DAC */
  DAC_mult(rig, DEFAULT_DAC_MULT);	/* Set DAC multiplier value */

  return RIG_OK;
}

int sdr1k_set_ptt (RIG *rig, vfo_t vfo, ptt_t ptt)
{
	return set_bit(rig, L_BAND, 6, ptt == RIG_PTT_ON);
}
  

int sdr1k_set_level (RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
	rig_debug(RIG_DEBUG_TRACE,"%s: %s %d\n", __FUNCTION__, rig_strlevel(level), val.i);

	switch (level) {
	case RIG_LEVEL_PREAMP:
 		return set_bit(rig, L_EXT, 7, !(val.i == rig->caps->preamp[0]));
		break;
	default:
		return -RIG_EINVAL;
	}
}
  

int
write_latch (RIG *rig, latch_t which, unsigned value, unsigned mask)
{
  struct sdr1k_priv_data *priv = (struct sdr1k_priv_data *)rig->state.priv;
  port_t *pport = &rig->state.rigport;

  if (!(L_EXT <= which && which <= L_DDS1))
    return -RIG_EINVAL;
  
  par_lock (pport);
  priv->shadow[which] = (priv->shadow[which] & ~mask) | (value & mask);
  par_write_data (pport, priv->shadow[which]);
  pdelay(rig);
  par_write_control (pport, 0x0F ^ (1 << which));
  pdelay(rig);
  par_write_control (pport, 0x0F);
  pdelay(rig);
  par_unlock (pport);

  return RIG_OK;
}


int
dds_write_reg (RIG *rig, unsigned addr, unsigned data)
{
#if 0
	write_latch (rig, L_DDS1, addr & 0x3f, 0x3f);
	write_latch (rig, L_DDS0, data, 0xff);
	write_latch (rig, L_DDS1, 0x40, 0x40);
	write_latch (rig, L_DDS1, 0x00, 0x40);
#else
	/* set up data bits */
	write_latch (rig, L_DDS0, data, 0xff);

	/* set up address bits with WRB high */
	//write_latch (rig, L_DDS1, addr & 0x3f, 0x3f);
	write_latch (rig, L_DDS1, WRB | addr, 0xff);

	/* send write command with WRB low */
	write_latch (rig, L_DDS1, addr, 0xff);

	/* return WRB high */
	write_latch (rig, L_DDS1, WRB, 0xff);
#endif

	return RIG_OK;
}

int
set_bit (RIG *rig, latch_t reg, unsigned bit, unsigned state)
{
	unsigned val;
	
	val = state ? 1<<bit : 0;

	return write_latch (rig, reg, val, 1<<bit);
}