/* * Hamlib CI-V backend - description of IC-910 (VHF/UHF All-Mode Tranceiver) * Contributed by Francois Retief * Copyright (c) 2000,2001 by Stephane Fillod * * $Id: ic910.c,v 1.1 2002-02-28 10:59:46 fgretief Exp $ * * This library is free software; you can redistribute it and/or modify * it under the terms of the GNU Library General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include "icom.h" int ic910_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { /* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */ if (mode == RIG_MODE_FM) { mode = RIG_MODE_RTTY; } return icom_set_mode(rig, vfo, mode, width); } int ic910_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width) { /* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */ int retval = icom_get_mode(rig, vfo, mode, width); if (*mode == RIG_MODE_RTTY) { *mode = RIG_MODE_FM; } return retval; } #define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM) #define IC910_VFO_ALL (RIG_VFO_A|RIG_VFO_C) #define IC910_SCAN_OPS (RIG_SCAN_MEM) #define IC910_VFO_OPS (RIG_OP_FROM_VFO| \ RIG_OP_TO_VFO| \ RIG_OP_CPY| \ RIG_OP_MCL) #define IC910_FUNC_ALL (RIG_FUNC_FAGC| \ RIG_FUNC_NB| \ RIG_FUNC_NR| \ RIG_FUNC_ANF| \ RIG_FUNC_TONE| \ RIG_FUNC_TSQL| \ RIG_FUNC_COMP| \ RIG_FUNC_VOX| \ RIG_FUNC_FBKIN| \ RIG_FUNC_AFC| \ RIG_FUNC_SATMODE| \ RIG_FUNC_SCOPE) #define IC910_LEVEL_ALL (RIG_LEVEL_AF| \ RIG_LEVEL_RF| \ RIG_LEVEL_SQL| \ RIG_LEVEL_IF| \ RIG_LEVEL_NR| \ RIG_LEVEL_CWPITCH| \ RIG_LEVEL_RFPOWER| \ RIG_LEVEL_MICGAIN| \ RIG_LEVEL_KEYSPD| \ RIG_LEVEL_COMP| \ RIG_LEVEL_VOXGAIN| \ RIG_LEVEL_VOXDELAY| \ RIG_LEVEL_ANTIVOX| \ RIG_LEVEL_ATT) #define IC910_STR_CAL { 0, { } } /* */ static const struct icom_priv_caps ic910_priv_caps = { 0x60, /* default address */ 1, /* 731 mode */ ic910_ts_sc_list, IC910_STR_CAL }; const struct rig_caps ic910_caps = { rig_model: RIG_MODEL_IC910, model_name:"IC-910", mfg_name: "Icom", version: "0.1", copyright: "LGPL", status: RIG_STATUS_ALPHA, rig_type: RIG_TYPE_TRANSCEIVER, ptt_type: RIG_PTT_NONE, dcd_type: RIG_DCD_NONE, port_type: RIG_PORT_SERIAL, serial_rate_min: 300, serial_rate_max: 19200, serial_data_bits: 8, serial_stop_bits: 1, serial_parity: RIG_PARITY_NONE, serial_handshake: RIG_HANDSHAKE_NONE, write_delay: 0, post_write_delay: 0, timeout: 200, retry: 3, has_get_func: IC910_FUNC_ALL, has_set_func: IC910_FUNC_ALL, has_get_level: IC910_LEVEL_ALL | (RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH), has_set_level: IC910_LEVEL_ALL, has_get_parm: RIG_PARM_NONE, has_set_parm: RIG_PARM_NONE, level_gran: {}, parm_gran: {}, ctcss_list: NULL, dcs_list: NULL, preamp: { RIG_DBLST_END, }, attenuator: { RIG_DBLST_END, }, max_rit: Hz(0), /* SSB,CW: +-1.0kHz FM: +-5.0kHz */ max_xit: Hz(0), max_ifshift: Hz(0), /* 1.2kHz manual knob */ targetable_vfo: 0, vfo_ops: IC910_VFO_OPS, scan_ops: IC910_SCAN_OPS, transceive: RIG_TRN_RIG, bank_qty: 0, chan_desc_sz: 0, chan_list: { { 1, 99, RIG_MTYPE_MEM, 0 }, { 100, 105, RIG_MTYPE_EDGE, 0 }, { 106, 106, RIG_MTYPE_CALL, 0 }, RIG_CHAN_END, }, rx_range_list1: { /* USA */ {MHz(144),MHz(148),IC910_MODES,-1,-1,IC910_VFO_ALL}, {MHz(430),MHz(450),IC910_MODES,-1,-1,IC910_VFO_ALL}, RIG_FRNG_END, }, tx_range_list1: { {MHz(144),MHz(148),IC910_MODES,W(5),W(100),IC910_VFO_ALL}, {MHz(430),MHz(450),IC910_MODES,W(5),W(75),IC910_VFO_ALL}, RIG_FRNG_END, }, rx_range_list2: { /* Europe */ {MHz(144),MHz(146),IC910_MODES,-1,-1,IC910_VFO_ALL}, {MHz(430),MHz(440),IC910_MODES,-1,-1,IC910_VFO_ALL}, RIG_FRNG_END, }, tx_range_list2: { {MHz(144),MHz(146),IC910_MODES,W(5),W(100),IC910_VFO_ALL}, {MHz(430),MHz(440),IC910_MODES,W(5),W(75),IC910_VFO_ALL}, RIG_FRNG_END, }, tuning_steps: { {RIG_MODE_SSB|RIG_MODE_CW,1}, {RIG_MODE_SSB|RIG_MODE_CW,10}, {RIG_MODE_SSB|RIG_MODE_CW,50}, {RIG_MODE_SSB|RIG_MODE_CW,100}, {RIG_MODE_FM,kHz(0.1)}, {RIG_MODE_FM,kHz(5)}, {RIG_MODE_FM,kHz(6.25)}, {RIG_MODE_FM,kHz(10)}, {RIG_MODE_FM,kHz(12.5)}, {RIG_MODE_FM,kHz(20)}, {RIG_MODE_FM,kHz(25)}, {RIG_MODE_FM,kHz(100)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ filters: { {RIG_MODE_CW|RIG_MODE_SSB, kHz(2.3)}, /* buildin */ {RIG_MODE_FM, kHz(15)}, /* buildin */ RIG_FLT_END, }, priv: (void*)&ic910_priv_caps, rig_init: icom_init, rig_cleanup: icom_cleanup, rig_open: NULL, rig_close: NULL, cfgparams: icom_cfg_params, set_conf: icom_set_conf, get_conf: icom_get_conf, get_freq: icom_get_freq, set_freq: icom_set_freq, get_mode: ic910_get_mode, set_mode: ic910_set_mode, get_vfo: NULL, set_vfo: icom_set_vfo, get_ts: icom_get_ts, set_ts: icom_set_ts, get_channel: icom_get_channel, set_channel: icom_set_channel, get_func: icom_get_func, set_func: icom_set_func, get_level: icom_get_level, set_level: icom_set_level, set_mem: icom_set_mem, vfo_op: icom_vfo_op, scan: icom_scan, decode_event: icom_decode_event, }; /* end of file */