Basic Installation ================== For more information specific to Hamlib, please read the README as well as README.betatester and the first part of README.developer to see which additional development packages are needed. This source code distribution is autoconfiguring and you should be able to compile it and install it without manual interventions such as editing Makefiles, configuration files, and so on. These are generic instructions for people who are not familiar with installing autoconfiguring software (along with some Hamlib-specific information). The simplest way to compile this package is to enter the source code main directory and do the following: 1. Configure the source code by typing: $ ./configure If you are planning to install the package into your home directory or to a location other than `/usr/local' then add the flag `--prefix=PATH' to `configure'. For example, if your home directory is `/home/username' and you would like to install it to a directory named 'local' you can configure the package to install itself there by invoking: $ ./configure --prefix=$HOME/local The configure script has several options to configure Hamlib. See the Optional Features section below. While running, `configure' prints some messages telling you which features it is checking for. 2. Compile the package by typing: $ make Running `make' takes a while. Since Hamlib is a package, now is the time to go get a cup of coffee. 3. Some packages are bundled with self-tests for source-code verification. If this package includes such tests, you can optionally run them after compilation by typing $ make check 4. Type `make install' to install the programs and any data files and documentation. Type `make uninstall' to undo the installation. N.B. Be aware that Super User (root) privileges will be required to install to /usr/local or any other system location outside of your home directory. Many distributions include the `sudo' command which will permit you to install Hamlib after entering your password. Otherwise you will need to log in as 'root'. During installation, the following files go to the following directories: Executables -> /prefix/bin Libraries -> /prefix/lib Public header files -> /prefix/include Man pages -> /prefix/man/man? Info files -> /prefix/info Doc files -> /prefix/share/doc/ Share files -> /prefix/share/ where `prefix' is either `/usr/local' or the PATH that you specified in the `--prefix' flag. If any of these directories do not presently exist, they will be created on demand. If you are installing in your home directory make sure that `/home/username/bin' is in your path. If you're using the bash shell add these lines at the end of your .bashrc file: PATH="/home/username/bin:${PATH}" export PATH If you are using csh or tcsh, then use this line instead: setenv PATH /home/username/bin:${PATH} By prepending your home directory to the rest of the PATH you can override systemwide installed software with your own custom installation. 5. After installation you may need to update the ld.so.cache as the installation files are placed in /usr/local/lib by default. On most systems this is easily accomplished by running the `ldconfig' command as the superuser (root). The following line may need to be added to /etc/ld.so.conf: /usr/local/lib Most modern distributions have an /etc/ld.so.conf.d/ directory where local configuration can be made. Later versions of Debian and derivatives have a file named 'libc.conf' in this directory. The contents of libc.conf are: # libc default configuration /usr/local/lib If your system does not have such a file, one will need to be created and then `ldconfig' will need to be run as the root user so that applications using the Hamlib libraries can find them. Now `ldconfig' can be run. While the programs built along with Hamlib will probably work fine without running `ldconfig', experience has shown that precompiled binaries like Fldigi will not be able to find a locally compiled libhamlib.so.2 without updating the ld.so.cache. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. The `configure' program will need to be run again to recompile Hamlib. 7. You can optionally generate the Doxygen documentation files: cd doc make doc The HTML output files are provided for binary releases on the hamlib.org web site. 8. Finally, if you wish to remove Hamlib, run `make uninstall' as superuser (root), unless Hamlib was installed into your home directory, from the Hamlib source directory. This will work unless `make distclean' has been run. Compiler configuration (Advanced usage) ======================================= The `configure' shell script is responsible for choosing and configuring the compiler(s). All programs are compiled with optimization level 2 by default (-O2). Occasionally that confuses the debugger when code is inlined. To disable optimization and enable debugging, set the shell environment variables CFLAGS, CXXFLAGS. On the bash shell, you can do this like this: $ export CFLAGS="-g" $ export CXXFLAGS="-g" On the tcsh shell, use the `setenv' command instead: % setenv CFLAGS "-g" ...etc... For other shells, please consult your shell's documentation. Similarly, you can increase the optimization level by assigning these variables to "-O3". These variables may also follow all options on the configure command line: ./configure --prefix="$HOME/local" [more options] \ CFLAGS="-g -O0" \ CXXFLAGS="-g -O0" which will set the installation path to the the directory named 'local' under user's home directory(executables will be installed to $HOME/local/bin, header files to $HOME/local/include, and so on) and tells the C and C++ compilers to enable debugging symbols and disable optimizations. N.B. When setting environment variables on the configure command line, always put them last so the configure script is aware of them and can store them in the cache. When placed before the configure script on the command line, they cannot be cached. Depending on what languages the package uses, some of these options may or may not be available. To see what is available, type: % sh ./configure --help About the configure script ========================== The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' is used to create `configure' by a program called `autoreconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. This project uses a custom `bootstrap' for running autoreconf in a developer's checkout of Hamlib from a source repository. Advanced installation options. ============================== The `configure' script also understands the following more advanced options, to handle situations for which `--prefix' alone is not sufficient. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. The configure script enables both shared and static Hamlib library builds by default. In some cases only one or the other is needed. The following options control the type of library: --disable-shared # Only build a static library --disable-static # Only build a shared library Shared libraries (DLLs on Windows) are used most often, however, there are times when it is desirable to have Hamlib included as a built-in part of an application which the use a static library (see Static Build below). MS Windows ========== - Debian system with mingw32msvc cross-compiler ./configure --host=i586-mingw32msvc - Debian system with MinGW W64 cross-compiler for Windows 32 bit ./configure --host=i686-w64-mingw32 - Specifying the directory of libusb-1.0 for a Windows build using MinGW as libusb-1.0 must be installed separately, use the following environment variables after all other options. ./configure [other options] \ CPPFLAGS="-I/path_to_libusb-1.0/include" \ LDFLAGS="-L/path_to_libusb-1.0/lib/gcc" - Mingw compiler under Cygwin ./configure --host=i686-pc-mingw32 \ CC="gcc -mno-cygwin" \ CXX="g++ -mno-cygwin" - Cygwin Native Cygwin requires no special options besides regular ones. N.B. See the 'build-win32.sh' script and its associated README.build-win32 file in the 'scripts' directory for complete details on building a Windows 32 binary with MSVCC library support. Hamlib Specific Features ======================== Various Hamlib features requiring the presence of third party packages are enabled with options beginning with '--with-'. At this time these options are: --with-xml-support build rigmem with XML support [default=no] --without-readline disable readline in rigctl/rotctl [default=yes] --without-cxx-binding do not build C++ binding and demo [default=yes] --with-perl-binding build perl binding and demo [default=no] --with-perl-inc directory containing perl includes --with-python-binding build python binding and demo [default=no] --with-tcl-binding build Tcl binding and demo [default=no] --with-tcl=PATH directory containing tcl configuration (tclConfig.sh) --with-lua-binding build lua binding and demo [default=no] --without-indi disable INDI rotator support [default=no] Optional features that may require specialized hardware are: --disable-html-matrix do not generate HTML rig feature matrix (requires libgd-dev) [default=check] --disable-winradio do not build winradio backend [default=yes] --enable-usrp build USRP backend [default=no] Bindings notes -------------- Should you encounter any problem with the build of the C++ binding, you can disable this optional part by passing `--without-cxx-binding' to the configure script (may happen under MacOSX). Note that the Perl, Python, Lua and TCL bindings are disabled by default so they will need to be specifically enabled for language binding support (this has no effect on rigctld/rotctld). You may get a make error (which means it will quit before compilation is complete) if the --with-[perl|python|tcl|lua]-binding option(s) are given and the Swig package is not installed. Perl and Python bindings should be installed into a 'configure' runtime discovered location under the default prefix. The TCL binding will be installed into $(libdir)/tcl/Hamlib (default). If a non-default --prefix is passed to 'configure', the 'lappend' line in tcltest.tcl script will need to be modified accordingly so the script can load the Hamlib package. As TCL doesn't seem to have a "standard" location for additional packages and since there seemed to be no common location among distributions, this path was chosen arbitrarily. Any patches to improve installation path discovery of local packages are welcome. Lua binding will be installed into $(libdir)/lua/$(LUA_VERSION) (default). For non-default settings, see notes at other bindings. When running 'make uninstall' the installed files for the Python, Lua and TCL modules are removed. The Perl files will remain due to a design decision of the Perl MakeMaker module. Installed Perl binding files will need to be removed manually. Static Build ============ Note, the following is still experimental. As noted above, there are times when including Hamlib as part of an application may be thought to ease its distribution. As a static library is built by default the following notes may assist application authors. The 'kit' backend depends on libusb-1.0. To link libusb-1.0 statically set the following environment variable on the 'configure' command line: LIBUSB_LIBS="/usr/lib/i386-linux-gnu/libusb-1.0.a" do note that the absolute path to 'libusb-1.0.a' may well be quite different on other systems. By default the GNU linker (ld) will include most all symbols in a static library into the executable. As it may be desired to only include the actual symbols used by the application, set the following environment variables on the command line of the application's 'configure' script: CFLAGS="-fdata-sections -ffunction-sections" LDFLAGS="-Wl,--gc-sections" These can be set on the Hamlib 'configure' script's command line to see the effect on the Hamlib utilities when they are built as statically linked applicatins (--disable-shared option passed to 'configure'). With these environment variables it can be seen that 'rigctl' contains no rotor symbols nor does 'rotctl' contain any rig symbols. Combining the above, everything above may be put together: ./configure --disable-shared --prefix="$HOME/local" --without-cxx-binding \ --disable-winradio CFLAGS="-fdata-sections -ffunction-sections" \ LDFLAGS="-Wl,--gc-sections" LIBUSB_LIBS="/usr/lib/i386-linux-gnu/libusb-1.0.a" to make a static only Hamlib library, statically link libusb-1.0, and include only the needed symbols in the Hamlib utilities linking to libhamlib.a.