/*
 *  Hamlib R&S backend - EB200 description
 *  Copyright (c) 2009-2010 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "rs.h"


/* TODO: PULSE and IQ ? */
#define EB200_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define EB200_FUNC (RIG_FUNC_SQL|RIG_FUNC_AFC|RIG_FUNC_LOCK)

#define EB200_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_SQL|RIG_LEVEL_AGC|\
                        RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)

#define EB200_PARM_ALL (RIG_PARM_NONE)

#define EB200_VFO (RIG_VFO_A)

#define EB200_VFO_OPS (RIG_OP_NONE)

#define EB200_ANTS (RIG_ANT_1)

#define EB200_MEM_CAP {    \
        .freq = 1,      \
        .mode = 1,      \
        .width = 1,     \
        .ant = 1,     \
        .funcs = EB200_FUNC, \
        .levels = RIG_LEVEL_SET(EB200_LEVEL_ALL), \
        .channel_desc=1, \
        .flags = RIG_CHFLAG_SKIP, \
}


/*
 * EB200 rig capabilities.
 *
 * Needs option ESMBR2 for computer operation RS-232C
 *
 * TODO
 *  - set/get_channels
 *  - get_dcd
 *  - set_ant
 */

const struct rig_caps eb200_caps = {
.rig_model =  RIG_MODEL_EB200,
.model_name = "EB200",
.mfg_name =  "Rohde&Schwarz",
.version =  "0.1",
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,	/* 7E2 */
.serial_rate_max =  115200,	/* 7E1, RTS/CTS */
.serial_data_bits =  7,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_EVEN,
.serial_handshake =  RIG_HANDSHAKE_HARDWARE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,

.has_get_func =  EB200_FUNC,
.has_set_func =  EB200_FUNC,
.has_get_level =  EB200_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(EB200_LEVEL_ALL),
.has_get_parm =  EB200_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(EB200_PARM_ALL),
.level_gran =  {},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { 32, RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   0,
.chan_desc_sz =  7,	/* FIXME */
.vfo_ops =  EB200_VFO_OPS,

.chan_list =  {
    { 0, 999, RIG_MTYPE_MEM, EB200_MEM_CAP },
	RIG_CHAN_END,
	},

.rx_range_list1 =  {
	{kHz(10),GHz(3),EB200_MODES,-1,-1,EB200_VFO,EB200_ANTS},
	RIG_FRNG_END,
  },
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
	{kHz(10),GHz(3),EB200_MODES,-1,-1,EB200_VFO,EB200_ANTS},
	RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },

.tuning_steps =  {
	 {EB200_MODES,1},
	 {EB200_MODES,10},
	 {EB200_MODES,100},
	 {EB200_MODES,1000},
	 RIG_TS_END,
	},

        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_WFM, kHz(150)},
		{RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
		{EB200_MODES, kHz(2.4)},
		{EB200_MODES, kHz(1.5)},
		{EB200_MODES,  Hz(150)},
		{EB200_MODES,  Hz(300)},
		{EB200_MODES,  Hz(600)},
		{EB200_MODES, kHz(6)},
		{EB200_MODES, kHz(9)},
		{EB200_MODES, kHz(15)},
		{EB200_MODES, kHz(30)},
		{EB200_MODES, kHz(50)},
		{EB200_MODES, kHz(120)},
		RIG_FLT_END,
	},
.priv =  NULL,

.set_freq =  rs_set_freq,
.get_freq =  rs_get_freq,
.set_mode =  rs_set_mode,
.get_mode =  rs_get_mode,
.set_level =  rs_set_level,
.get_level =  rs_get_level,
.set_func =  rs_set_func,
.get_func =  rs_get_func,
.get_info =  rs_get_info,
.reset =  rs_reset,

#if 0
/* TODO */
.rig_open =  rs_rig_open,
.set_channel =  rs_set_channel,
.get_channel =  rs_get_channel,
#endif
};

/*
 * Function definitions below
 */