/*
 *  Hamlib CI-V backend - description of IC-821H (VHF/UHF All-Mode Tranceiver)
 *  Contributed by Francois Retief <fgretief@sun.ac.za>
 *  Copyright (c) 2000,2001 by Stephane Fillod
 *
 *      $Id: ic821h.c,v 1.1 2001-12-20 23:04:43 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <hamlib/rig.h>
#include "icom.h"


#define IC821H_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)

#define IC821H_VFO_ALL (RIG_VFO_A|RIG_VFO_C)
/* FIXME: What about MAIN/SUB mode? And satellite mode? */

#define IC821H_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_CPY|RIG_OP_MCL)

#define IC821H_SCAN_OPS (RIG_SCAN_MEM)
/* FIXME: Manual talks about 3 modes: Programmed scan, Memory scan and
 * Mode select memory scan operation. How do i encode these?
 */


#define IC821H_STR_CAL { 0, { } }
/*
 */
static const struct icom_priv_caps ic821h_priv_caps = {
   	0x4c,   		/* default address */
	1,				/* 731 mode */
   	ic737_ts_sc_list,
   	IC821H_STR_CAL
};

const struct rig_caps ic821h_caps = {
rig_model: RIG_MODEL_IC821H,
model_name:"IC-821H",
mfg_name: "Icom",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_ALPHA,
rig_type: RIG_TYPE_TRANSCEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 300,
serial_rate_max: 19200,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,
has_get_func: RIG_FUNC_NONE,
has_set_func: RIG_FUNC_NONE,
has_get_level: RIG_LEVEL_NONE,
has_set_level: RIG_LEVEL_NONE,
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,
level_gran: {},
parm_gran: {},
ctcss_list: NULL,
dcs_list: NULL,
preamp:  { RIG_DBLST_END, },
attenuator:  { RIG_DBLST_END, },    /* Attanuator 15dB for each band. manual button */
max_rit: Hz(0),     /* SSB,CW: +-1.0kHz  FM: +-5.0kHz */
max_xit: Hz(0),
max_ifshift: Hz(0),	/* 1.2kHz manual knob */
targetable_vfo: 0,
vfo_ops: IC821H_VFO_OPS,
scan_ops: IC821H_SCAN_OPS,
transceive: RIG_TRN_RIG,
bank_qty:  0,
chan_desc_sz: 0,

chan_list: {
                   /* FIXME: Each band has 80 channels (2*80) */
                   {   1,  80, RIG_MTYPE_MEM,   0 },
                   {  81,  82, RIG_MTYPE_EDGE,  0 },
				   RIG_CHAN_END,
		},

rx_range_list1:  {
    {MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
    {MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
	RIG_FRNG_END, },
tx_range_list1: {
    {MHz(144),MHz(146),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
    {MHz(144),MHz(146),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
    {MHz(430),MHz(440),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
    {MHz(430),MHz(440),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
	RIG_FRNG_END, },

rx_range_list2:  {
    {MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
    {MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
	RIG_FRNG_END, },
    /*
     *   From manual:    VHF                UHF
     * USA           144.0-148.0 MHz    430.0-450.0 MHz
     * Europe        144.0-146.0 MHz    430.0-440.0 MHz
     * Australia     144.0-148.0 MHz    430.0-450.0 MHz
     * Sweden        144.0-146.0 MHz    432.0-438.0 MHz
     */
tx_range_list2: {
    {MHz(144),MHz(148),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
    {MHz(144),MHz(148),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
    {MHz(430),MHz(450),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
    {MHz(430),MHz(450),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
	RIG_FRNG_END, },

tuning_steps:	{
    {RIG_MODE_SSB|RIG_MODE_CW,1},
    {RIG_MODE_SSB|RIG_MODE_CW,10},
    {RIG_MODE_SSB|RIG_MODE_CW,50},
    {RIG_MODE_SSB|RIG_MODE_CW,100},
    {RIG_MODE_FM,kHz(5)},
    RIG_TS_END, },
	/* mode/filter list, remember: order matters! */
filters:	{
    {RIG_MODE_CW|RIG_MODE_SSB, kHz(2.3)},   /* buildin */
    {RIG_MODE_FM, kHz(15)},                 /* buildin */
     RIG_FLT_END, },

cfgparams: icom_cfg_params,
set_conf: icom_set_conf,
get_conf: icom_get_conf,

priv: (void*)&ic821h_priv_caps,
rig_init:  icom_init,
rig_cleanup:  icom_cleanup,
rig_open: NULL,
rig_close: NULL,

set_freq: icom_set_freq,
get_freq: icom_get_freq,
set_mode: icom_set_mode,
get_mode: icom_get_mode,
set_vfo: icom_set_vfo,

decode_event: icom_decode_event,
set_mem: icom_set_mem,
vfo_op: icom_vfo_op,
scan: icom_scan,

};