/* * Hamlib CI-V backend - description of IC-7800 and variations * Copyright (c) 2009-2010 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include /* String function definitions */ #include #include "token.h" #include "idx_builtin.h" #include "icom.h" #include "icom_defs.h" #include "bandplan.h" #define IC7800_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_PSK|RIG_MODE_PSKR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTAM|RIG_MODE_PKTFM) #define IC7800_1HZ_TS_MODES IC7800_ALL_RX_MODES #define IC7800_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_PSK|RIG_MODE_PSKR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM) #define IC7800_AM_TX_MODES (RIG_MODE_AM|RIG_MODE_PKTAM) #define IC7800_FUNCS (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK|RIG_FUNC_RIT|RIG_FUNC_XIT|RIG_FUNC_TUNER|RIG_FUNC_APF|RIG_FUNC_DUAL_WATCH) #define IC7800_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_ANTIVOX|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC|RIG_LEVEL_RFPOWER_METER|RIG_LEVEL_RFPOWER_METER_WATTS|RIG_LEVEL_COMP_METER|RIG_LEVEL_VD_METER|RIG_LEVEL_ID_METER|RIG_LEVEL_MONITOR_GAIN|RIG_LEVEL_NB) #define IC7800_VFOS (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM) #define IC7800_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT) #define IC7800_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE) #define IC7800_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO) #define IC7800_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3|RIG_ANT_4) // IC-7800 S-meter calibration data based on manual #define IC7800_STR_CAL { 3, \ { \ { 0, -54 }, /* S0 */ \ { 120, 0 }, /* S9 */ \ { 241, 60 } /* S9+60 */ \ } } #define IC7800_SWR_CAL { 5, \ { \ { 0, 1.0f }, \ { 48, 1.5f }, \ { 80, 2.0f }, \ { 120, 3.0f }, \ { 240, 6.0f } \ } } #define IC7800_ALC_CAL { 2, \ { \ { 0, 0.0f }, \ { 120, 1.0f } \ } } #define IC7800_RFPOWER_METER_CAL { 13, \ { \ { 0, 0.0f }, \ { 21, 5.0f }, \ { 43, 10.0f }, \ { 65, 15.0f }, \ { 83, 20.0f }, \ { 95, 25.0f }, \ { 105, 30.0f }, \ { 114, 35.0f }, \ { 124, 40.0f }, \ { 143, 50.0f }, \ { 183, 75.0f }, \ { 213, 100.0f }, \ { 255, 120.0f } \ } } #define IC7800_COMP_METER_CAL { 3, \ { \ { 0, 0.0f }, \ { 130, 15.0f }, \ { 241, 30.0f } \ } } #define IC7800_VD_METER_CAL { 4, \ { \ { 0, 0.0f }, \ { 151, 44.0f }, \ { 180, 48.0f }, \ { 211, 52.0f } \ } } #define IC7800_ID_METER_CAL { 3, \ { \ { 0, 0.0f }, \ { 165, 10.0f }, \ { 241, 15.0f } \ } } int ic7800_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val); int ic7800_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val); struct cmdparams ic7800_extcmds[] = { { {.s = RIG_LEVEL_VOXDELAY}, CMD_PARAM_TYPE_LEVEL, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x83}, CMD_DAT_INT, 1 }, { { 0 } } }; int ic7800_ext_tokens[] = { TOK_DRIVE_GAIN, TOK_DIGI_SEL_FUNC, TOK_DIGI_SEL_LEVEL, TOK_BACKEND_NONE }; /* * IC-7800 rig capabilities. */ static const struct icom_priv_caps ic7800_priv_caps = { 0x6a, /* default address */ 0, /* 731 mode */ 0, /* no XCHG */ ic756pro_ts_sc_list, .antack_len = 4, .ant_count = 3, .agc_levels_present = 1, .agc_levels = { { .level = RIG_AGC_OFF, .icom_level = 0 }, { .level = RIG_AGC_FAST, .icom_level = 1 }, { .level = RIG_AGC_MEDIUM, .icom_level = 2 }, { .level = RIG_AGC_SLOW, .icom_level = 3 }, { .level = -1, .icom_level = 0 }, }, .extcmds = ic7800_extcmds, }; const struct rig_caps ic7800_caps = { RIG_MODEL(RIG_MODEL_IC7800), .model_name = "IC-7800", .mfg_name = "Icom", .version = BACKEND_VER ".1", .copyright = "LGPL", .status = RIG_STATUS_UNTESTED, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = IC7800_FUNCS, .has_set_func = IC7800_FUNCS, .has_get_level = IC7800_LEVELS, .has_set_level = RIG_LEVEL_SET(IC7800_LEVELS), .has_get_parm = IC7800_PARMS, .has_set_parm = RIG_PARM_SET(IC7800_PARMS), /* FIXME: parms */ .level_gran = { // cppcheck-suppress * [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, [LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } }, [LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } }, [LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } }, }, .parm_gran = {}, .ext_tokens = ic7800_ext_tokens, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 10, 16, RIG_DBLST_END, }, .attenuator = { 3, 6, 9, 12, 15, 18, 21, RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(9999), .max_ifshift = Hz(0), .agc_level_count = 4, .agc_levels = { RIG_AGC_OFF, RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW }, .targetable_vfo = RIG_TARGETABLE_FREQ | RIG_TARGETABLE_MODE, .vfo_ops = IC7800_VFO_OPS, .scan_ops = IC7800_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 99, RIG_MTYPE_MEM }, { 100, 101, RIG_MTYPE_EDGE }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30), MHz(60), IC7800_ALL_RX_MODES, -1, -1, IC7800_VFOS, IC7800_ANTS}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1, IC7800_OTHER_TX_MODES, W(5), W(200), IC7800_VFOS, IC7800_ANTS), FRQ_RNG_6m(1, IC7800_OTHER_TX_MODES, W(5), W(200), IC7800_VFOS, IC7800_ANTS), FRQ_RNG_HF(1, IC7800_AM_TX_MODES, W(5), W(50), IC7800_VFOS, IC7800_ANTS), /* AM class */ FRQ_RNG_6m(1, IC7800_AM_TX_MODES, W(5), W(50), IC7800_VFOS, IC7800_ANTS), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30), MHz(60), IC7800_ALL_RX_MODES, -1, -1, IC7800_VFOS, IC7800_ANTS}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2, IC7800_OTHER_TX_MODES, W(5), W(200), IC7800_VFOS, IC7800_ANTS), FRQ_RNG_6m(2, IC7800_OTHER_TX_MODES, W(5), W(200), IC7800_VFOS, IC7800_ANTS), FRQ_RNG_HF(2, IC7800_AM_TX_MODES, W(5), W(50), IC7800_VFOS, IC7800_ANTS), /* AM class */ FRQ_RNG_6m(2, IC7800_AM_TX_MODES, W(5), W(50), IC7800_VFOS, IC7800_ANTS), /* AM class */ /* USA only, TBC: end of range and modes */ {MHz(5.33050), MHz(5.33350), IC7800_OTHER_TX_MODES, W(2), W(100), IC7800_VFOS, IC7800_ANTS}, /* USA only */ {MHz(5.34650), MHz(5.34950), IC7800_OTHER_TX_MODES, W(2), W(100), IC7800_VFOS, IC7800_ANTS}, /* USA only */ {MHz(5.36650), MHz(5.36950), IC7800_OTHER_TX_MODES, W(2), W(100), IC7800_VFOS, IC7800_ANTS}, /* USA only */ {MHz(5.37150), MHz(5.37450), IC7800_OTHER_TX_MODES, W(2), W(100), IC7800_VFOS, IC7800_ANTS}, /* USA only */ {MHz(5.40350), MHz(5.40650), IC7800_OTHER_TX_MODES, W(2), W(100), IC7800_VFOS, IC7800_ANTS}, /* USA only */ RIG_FRNG_END, }, .tuning_steps = { {IC7800_1HZ_TS_MODES, 1}, {IC7800_ALL_RX_MODES, Hz(100)}, {IC7800_ALL_RX_MODES, kHz(1)}, {IC7800_ALL_RX_MODES, kHz(5)}, {IC7800_ALL_RX_MODES, kHz(9)}, {IC7800_ALL_RX_MODES, kHz(10)}, {IC7800_ALL_RX_MODES, kHz(12.5)}, {IC7800_ALL_RX_MODES, kHz(20)}, {IC7800_ALL_RX_MODES, kHz(25)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(2.4)}, {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(1.8)}, {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(3)}, {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_PSK | RIG_MODE_PSKR, Hz(400)}, {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_PSK | RIG_MODE_PSKR, Hz(50)}, {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_PSK | RIG_MODE_PSKR, kHz(1.0)}, {RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)}, {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(6)}, {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(3)}, {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(9)}, {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(12)}, {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(8)}, {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(15)}, RIG_FLT_END, }, .str_cal = IC7800_STR_CAL, .swr_cal = IC7800_SWR_CAL, .alc_cal = IC7800_ALC_CAL, .rfpower_meter_cal = IC7800_RFPOWER_METER_CAL, .comp_meter_cal = IC7800_COMP_METER_CAL, .vd_meter_cal = IC7800_VD_METER_CAL, .id_meter_cal = IC7800_ID_METER_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void *)& ic7800_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = icom_rig_open, .rig_close = icom_rig_close, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode_with_data, .get_mode = icom_get_mode_with_data, .set_vfo = icom_set_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .set_rit = icom_set_rit_new, .get_rit = icom_get_rit_new, .get_xit = icom_get_rit_new, .set_xit = icom_set_xit_new, .decode_event = icom_decode_event, .set_level = ic7800_set_level, .get_level = ic7800_get_level, .set_ext_level = icom_set_ext_level, .get_ext_level = icom_get_ext_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_parm = icom_set_parm, .get_parm = icom_get_parm, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .set_ptt = icom_set_ptt, .get_ptt = icom_get_ptt, .get_dcd = icom_get_dcd, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_get_split_vfo, .set_powerstat = icom_set_powerstat, .get_powerstat = icom_get_powerstat, .send_morse = icom_send_morse, .stop_morse = icom_stop_morse, .wait_morse = rig_wait_morse }; /* * IC-7800 has 0x11 command using index instead of backend's real dB value * * c.f. http://www.plicht.de/ekki/civ/civ-p42.html */ int ic7800_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val) { rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (level) { case RIG_LEVEL_ATT: if (val.i != 0) { /* Convert dB to index */ int i; for (i = 0; i < 7; i++) { if (val.i == rig->state.attenuator[i]) { val.i = i + 1; break; } } /* TODO: Should fail when not found? */ } return icom_set_level(rig, vfo, level, val); default: return icom_set_level(rig, vfo, level, val); } } /* * IC-7800 has 0x11 command using index instead of backend's real dB value */ int ic7800_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val) { int retval; rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); switch (level) { case RIG_LEVEL_ATT: retval = icom_get_level(rig, vfo, level, val); if (retval != RIG_OK) { return retval; } /* Convert index to dB * Rem: ATT index 0 means attenuator Off */ if (val->i > 0 && val->i <= 7) { val->i = rig->state.attenuator[val->i - 1]; } break; default: return icom_get_level(rig, vfo, level, val); } return RIG_OK; }