/*
 *  Hamlib CI-V backend - description of IC-756 and variations
 *  Copyright (c) 2000,2001 by Stephane Fillod
 *
 *		$Id: ic756.c,v 1.1 2001-09-18 00:37:39 f4cfe Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <stdio.h>   /* Standard input/output definitions */
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */
#include <fcntl.h>   /* File control definitions */
#include <errno.h>   /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>

#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "icom.h"


#define IC756_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC756_1HZ_TS_MODES IC756_ALL_RX_MODES

/* 
 * 100W in all modes but AM (40W)
 */ 
#define IC756_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC756_AM_TX_MODES (RIG_MODE_AM)

#define IC756PRO_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_RNF)

#define IC756PRO_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF||RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH)

#define IC756_VFO_ALL (RIG_VFO_A|RIG_VFO_B)

#define IC756_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC756_SCAN_OPS (RIG_SCAN_MEM)

#define IC756PRO_STR_CAL { 16, \
	{ \
		{   0, -18 }, \
		{  10, -16 }, \
		{  27, -14 }, \
		{  45, -12 }, \
		{  60, -10 }, \
		{  76, -8 }, \
		{  89, -6 }, \
		{ 100, -4 }, \
		{ 110, -2 }, \
		{ 120, 0 }, \
		{ 125, 2 }, \
		{ 129, 4 }, \
		{ 133, 6 }, \
		{ 138, 8 }, \
		{ 142, 10 }, \
		{ 146, 12 } \
	} }

/*
 * ic756 rig capabilities.
 */
static const struct icom_priv_caps ic756_priv_caps = { 
		0x50,	/* default address */
		0,		/* 731 mode */
		ic756_ts_sc_list,
		IC756PRO_STR_CAL	/* FIXME */
};

const struct rig_caps ic756_caps = {
rig_model: RIG_MODEL_IC756,
model_name:"IC-756", 
mfg_name: "Icom", 
version: "0.2", 
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_TRANSCEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 300,
serial_rate_max: 19200,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE, 
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3, 
has_get_func: IC756PRO_FUNC_ALL,
has_set_func: IC756PRO_FUNC_ALL, 
has_get_level: IC756PRO_LEVEL_ALL,
has_set_level: RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,	/* FIXME: parms */
level_gran: {}, 		/* granularity */
parm_gran: {},
ctcss_list: common_ctcss_list,
dcs_list: NULL,
preamp:  { 10, RIG_DBLST_END, },	/* FIXME: TBC */
attenuator:  { 20, RIG_DBLST_END, },
max_rit: Hz(9999),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
vfo_ops: IC756_VFO_OPS,
scan_ops: IC756_SCAN_OPS,
transceive: RIG_TRN_RIG,
bank_qty:  0,
chan_desc_sz: 0,

chan_list: {
				   {   1,  99, RIG_MTYPE_MEM,  0 },
				   { 100, 101, RIG_MTYPE_EDGE, 0 },    /* two by two */
				   RIG_CHAN_END,
		},

rx_range_list1:  { RIG_FRNG_END, },	/* FIXME: enter region 1 setting */
tx_range_list1:  { RIG_FRNG_END, },

rx_range_list2:  { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
	RIG_FRNG_END, },
tx_range_list2: { {kHz(1800),MHz(2)-1,IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},	/* 100W class */
    {kHz(1800),MHz(2)-1,IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},	/* 40W class */
    {kHz(3500),MHz(4)-1,IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(3500),MHz(4)-1,IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
	{MHz(7),kHz(7300),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(7),kHz(7300),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {kHz(10100),kHz(10150),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(10100),kHz(10150),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(14),kHz(14350),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(14),kHz(14350),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {kHz(18068),kHz(18168),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(18068),kHz(18168),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(21),kHz(21450),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(21),kHz(21450),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {kHz(24890),kHz(24990),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(24890),kHz(24990),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(28),kHz(29700),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(28),kHz(29700),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(50),MHz(54),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(50),MHz(54),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
	RIG_FRNG_END, },

tuning_steps:	{
	 {IC756_1HZ_TS_MODES,1},
	 {IC756_ALL_RX_MODES,kHz(1)},
	 {IC756_ALL_RX_MODES,kHz(5)},
	 {IC756_ALL_RX_MODES,kHz(9)},
	 {IC756_ALL_RX_MODES,kHz(10)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
filters:	{
		{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)},
		{RIG_MODE_CW, Hz(500)},
		{RIG_MODE_AM, kHz(8)},
		{RIG_MODE_AM, kHz(2.4)},
		{RIG_MODE_FM, kHz(15)},
		{RIG_MODE_FM, kHz(8)},
		RIG_FLT_END,
	},

cfgparams: icom_cfg_params,
set_conf: icom_set_conf,
get_conf: icom_get_conf,

priv: (void*)&ic756_priv_caps,
rig_init:  icom_init,
rig_cleanup:  icom_cleanup,
rig_open: NULL,
rig_close: NULL,

set_freq: icom_set_freq,
get_freq: icom_get_freq,
set_mode: icom_set_mode,
get_mode: icom_get_mode,
set_vfo: icom_set_vfo,

decode_event: icom_decode_event,
set_level: icom_set_level,
get_level: icom_get_level,
set_func: icom_set_func,
get_func: icom_get_func,
set_mem: icom_set_mem,
vfo_op: icom_vfo_op,
scan: icom_scan,
get_dcd: icom_get_dcd,
set_ts: icom_set_ts,
get_ts: icom_get_ts,
set_rptr_shift: icom_set_rptr_shift,
get_rptr_shift: icom_get_rptr_shift,
set_rptr_offs: icom_set_rptr_offs,
get_rptr_offs: icom_get_rptr_offs,
set_split_freq: icom_set_split_freq,
get_split_freq: icom_get_split_freq,
set_split_mode: icom_set_split_mode,
get_split_mode: icom_get_split_mode,
set_split: icom_set_split,
get_split: icom_get_split,

};


/*
 * ic756pro rig capabilities.
 * TODO: check every paramters,
 * 		add antenna capabilities
 */
static const struct icom_priv_caps ic756pro_priv_caps = { 
		0x5c,	/* default address */
		0,		/* 731 mode */
		ic756_ts_sc_list,
		IC756PRO_STR_CAL
};

const struct rig_caps ic756pro_caps = {
rig_model: RIG_MODEL_IC756PRO,
model_name:"IC-756PRO", 
mfg_name: "Icom", 
version: "0.2", 
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_TRANSCEIVER,
ptt_type: RIG_PTT_RIG,
dcd_type: RIG_DCD_RIG,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 300,
serial_rate_max: 19200,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE, 
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3, 
has_get_func: IC756PRO_FUNC_ALL,
has_set_func: IC756PRO_FUNC_ALL, 
has_get_level: IC756PRO_LEVEL_ALL,
has_set_level: RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,	/* FIXME: parms */
level_gran: {}, 		/* granularity */
parm_gran: {},
ctcss_list: common_ctcss_list,
dcs_list: NULL,
preamp:  { 10, 20, RIG_DBLST_END, },	/* FIXME: TBC */
attenuator:  { 6, 12, 18, 20, RIG_DBLST_END, },
max_rit: Hz(9999),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
vfo_ops: IC756_VFO_OPS,
scan_ops: IC756_SCAN_OPS,
transceive: RIG_TRN_RIG,
bank_qty:  0,
chan_desc_sz: 0,

chan_list: {
				   {   1,  99, RIG_MTYPE_MEM,  0 },
				   { 100, 101, RIG_MTYPE_EDGE, 0 },    /* two by two */
				   RIG_CHAN_END,
		},

rx_range_list1:  { RIG_FRNG_END, },	/* FIXME: enter region 1 setting */
tx_range_list1:  { RIG_FRNG_END, },

rx_range_list2:  { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
	RIG_FRNG_END, },
tx_range_list2: { {kHz(1800),MHz(2)-1,IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},	/* 100W class */
    {kHz(1800),MHz(2)-1,IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},	/* 40W class */
    {kHz(3500),MHz(4)-1,IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(3500),MHz(4)-1,IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
	{MHz(7),kHz(7300),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(7),kHz(7300),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {kHz(10100),kHz(10150),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(10100),kHz(10150),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(14),kHz(14350),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(14),kHz(14350),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {kHz(18068),kHz(18168),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(18068),kHz(18168),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(21),kHz(21450),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(21),kHz(21450),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {kHz(24890),kHz(24990),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {kHz(24890),kHz(24990),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(28),kHz(29700),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(28),kHz(29700),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
    {MHz(50),MHz(54),IC756_OTHER_TX_MODES,5000,100000,IC756_VFO_ALL},
    {MHz(50),MHz(54),IC756_AM_TX_MODES,5000,40000,IC756_VFO_ALL},
	RIG_FRNG_END, },

tuning_steps:	{
	 {IC756_1HZ_TS_MODES,1},
	 {IC756_ALL_RX_MODES,kHz(1)},
	 {IC756_ALL_RX_MODES,kHz(5)},
	 {IC756_ALL_RX_MODES,kHz(9)},
	 {IC756_ALL_RX_MODES,kHz(10)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
filters:	{
		{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)},
		{RIG_MODE_CW, Hz(500)},
		{RIG_MODE_AM, kHz(8)},
		{RIG_MODE_AM, kHz(2.4)},
		{RIG_MODE_FM, kHz(15)},
		{RIG_MODE_FM, kHz(8)},
		RIG_FLT_END,
	},

cfgparams: icom_cfg_params,
set_conf: icom_set_conf,
get_conf: icom_get_conf,

priv: (void*)&ic756pro_priv_caps,
rig_init:  icom_init,
rig_cleanup:  icom_cleanup,
rig_open: NULL,
rig_close: NULL,

set_freq: icom_set_freq,
get_freq: icom_get_freq,
set_mode: icom_set_mode,
get_mode: icom_get_mode,
set_vfo: icom_set_vfo,

decode_event: icom_decode_event,
set_level: icom_set_level,
get_level: icom_get_level,
set_func: icom_set_func,
get_func: icom_get_func,
set_mem: icom_set_mem,
vfo_op: icom_vfo_op,
scan: icom_scan,
set_ptt: icom_set_ptt,
get_ptt: icom_get_ptt,
get_dcd: icom_get_dcd,
set_ts: icom_set_ts,
get_ts: icom_get_ts,
set_rptr_shift: icom_set_rptr_shift,
get_rptr_shift: icom_get_rptr_shift,
set_rptr_offs: icom_set_rptr_offs,
get_rptr_offs: icom_get_rptr_offs,
set_ctcss_tone: icom_set_ctcss_tone,
get_ctcss_tone: icom_get_ctcss_tone,
set_ctcss_sql: icom_set_ctcss_sql,
get_ctcss_sql: icom_get_ctcss_sql,
set_split_freq: icom_set_split_freq,
get_split_freq: icom_get_split_freq,
set_split_mode: icom_set_split_mode,
get_split_mode: icom_get_split_mode,
set_split: icom_set_split,
get_split: icom_get_split,

};