/*
 *  Hamlib Uniden backend - BCD996T description
 *  Copyright (c) 2001-2008 by Stephane Fillod
 *
 *	$Id: bcd996t.c,v 1.2 2008-10-18 06:21:31 roger-linux Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
/*#include "uniden.h"*/
#include "uniden_digital.h"


/* TODO: All these defines have to be filled in properly */

#define BCD996T_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define BCD996T_FUNC (RIG_FUNC_MUTE)

#define BCD996T_LEVEL_ALL (RIG_LEVEL_ATT)

#define BCD996T_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT)

#define BCD996T_VFO (RIG_VFO_A|RIG_VFO_B)

#define BCD996T_CHANNEL_CAPS \
			.freq=1,\
			.flags=1, /* L/O */

/*
 * bcd996t rig capabilities.
 *
 * TODO: check this with manual or web site.
 */
const struct rig_caps bcd996t_caps = {
.rig_model =  RIG_MODEL_BCD996T,
.model_name = "BCD-996T",
.mfg_name =  "Uniden",
.version =  BACKEND_DIGITAL_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_TRUNKSCANNER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  9600,
.serial_rate_max =  115200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  1,
.timeout =  2000,
.retry =  3,

.has_get_func =  BCD996T_FUNC,
.has_set_func =  BCD996T_FUNC,
.has_get_level =  BCD996T_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(BCD996T_LEVEL_ALL),
.has_get_parm =  BCD996T_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(BCD996T_PARM_ALL),
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  NULL,	/* FIXME: CTCSS list? */
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
		{ 0, 5999, RIG_MTYPE_MEM, {BCD996T_CHANNEL_CAPS} }, /* Really 6000 channels? */
		RIG_CHAN_END,
	},

.rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
	{MHz(25),MHz(512),BCD996T_MODES,-1,-1,BCD996T_VFO},
	{MHz(764),MHz(776),BCD996T_MODES,-1,-1,BCD996T_VFO},
	{MHz(794),MHz(956),BCD996T_MODES,-1,-1,BCD996T_VFO},
	{MHz(1240),MHz(1300),BCD996T_MODES,-1,-1,BCD996T_VFO}, /* TBC */
	RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },
.tuning_steps =  {
	 {BCD996T_MODES,10},	/* FIXME: add other ts */
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
		{RIG_MODE_WFM, kHz(230)},
		RIG_FLT_END,
	},

.get_info =  uniden_digital_get_info,
.set_freq =  uniden_digital_set_freq,
.get_freq =  uniden_digital_get_freq,

};

/*
 * Function definitions below
 */