/*
 *  Hamlib Alinco backend - DX77 description
 *  Copyright (c) 2001 by Stephane Fillod
 *
 *		$Id: dx77.c,v 1.3 2001-07-13 19:08:14 f4cfe Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <stdio.h>   /* Standard input/output definitions */
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */
#include <fcntl.h>   /* File control definitions */
#include <errno.h>   /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>

#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "alinco.h"


#define DX77_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DX77_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DX77_AM_TX_MODES RIG_MODE_AM

#define DX77_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TONE|RIG_FUNC_COMP)

#define DX77_LEVEL_ALL (RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH|RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD|RIG_LEVEL_BKINDL|RIG_LEVEL_CWPITCH)

#define DX77_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT)

#define DX77_VFO (RIG_VFO_A|RIG_VFO_B)

/* 90 is S9 */
#define DX77_STR_CAL { 13, { \
		{   0, -60 }, \
		{  28, -48 }, \
		{  36, -42 }, \
		{  42, -36 }, \
		{  50, -30 }, \
		{  58, -24 }, \
		{  66, -18 }, \
		{  74, -12 }, \
		{  82, -6 }, \
		{  90, 0 }, \
		{ 132, 20 }, \
		{ 174, 40 }, \
		{ 216, 60 }, \
	} }

static const struct alinco_priv_caps dx77_priv_caps = {
		DX77_STR_CAL
};

/*
 * dx77 rig capabilities.
 *
 * protocol is documented at 
 * 		http://www.alinco.com/pdf.files/DX77-77_SOFTWARE_MANUAL.pdf
 *
 * This backend was a pleasure to develop. Documentation is clear,
 * and the protocol logical. I'm wondering is the rig's good too. --SF
 *
 * TODO:
 *  - get_parm/set_parm and some LEVELs left (Set Data "2W" command).
 * 	- tuner
 * 	- up/down
 * 	- scan
 */
const struct rig_caps dx77_caps = {
rig_model: RIG_MODEL_DX77,
model_name:"DX-77",
mfg_name: "Alinco",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_TRANSCEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 9600,
serial_rate_max: 9600,
serial_data_bits: 8,
serial_stop_bits: 2,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,

has_get_func: DX77_FUNC,
has_set_func: DX77_FUNC|RIG_FUNC_MON,
has_get_level: DX77_LEVEL_ALL,
has_set_level: RIG_LEVEL_SET(DX77_LEVEL_ALL),
has_get_parm: DX77_PARM_ALL,
has_set_parm: RIG_PARM_SET(DX77_PARM_ALL),
level_gran: {},                 /* FIXME: granularity */
parm_gran: {},
ctcss_list: common_ctcss_list,
dcs_list: NULL,
preamp:  { 10, RIG_DBLST_END },
attenuator:  { 10, 20, RIG_DBLST_END },
max_rit: kHz(1),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
transceive: RIG_TRN_OFF,
bank_qty:  0,
chan_desc_sz: 0,

chan_list: {
			{ 0, 99, RIG_MTYPE_MEM, 0 },
			RIG_CHAN_END,
		},

rx_range_list1: { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: {
	{kHz(500),MHz(30),DX77_ALL_MODES,-1,-1,DX77_VFO},
	RIG_FRNG_END,
  },
tx_range_list2: {
    {kHz(1800),MHz(2)-100,DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {kHz(1800),MHz(2)-100,DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {kHz(3500),MHz(4)-100,DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {kHz(3500),MHz(4)-100,DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {MHz(7),kHz(7300),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {MHz(7),kHz(7300),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {kHz(10100),kHz(10150),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {kHz(10100),kHz(10150),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {MHz(14),kHz(14350),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {MHz(14),kHz(14350),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {kHz(18068),kHz(18168),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {kHz(18068),kHz(18168),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {MHz(21),kHz(21450),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {MHz(21),kHz(21450),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {kHz(24890),kHz(24990),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {kHz(24890),kHz(24990),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
    {MHz(28),kHz(29700),DX77_OTHER_TX_MODES,W(10),W(100),DX77_VFO},
    {MHz(28),kHz(29700),DX77_AM_TX_MODES,W(4),W(40),DX77_VFO},
	RIG_FRNG_END,
  },
tuning_steps: {
	 {DX77_ALL_MODES,10},	/* FIXME: add other ts */
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
filters: {
		{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.7)},
		{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
		{RIG_MODE_AM, kHz(2.7)},
		RIG_FLT_END,
	},
priv: (void*)&dx77_priv_caps,

set_freq: alinco_set_freq,
get_freq: alinco_get_freq,
set_mode: alinco_set_mode,
get_mode: alinco_get_mode,
set_vfo: alinco_set_vfo,
get_vfo: alinco_get_vfo,
set_split: alinco_set_split,
get_split: alinco_get_split,
set_split_freq: alinco_set_split_freq,
get_split_freq: alinco_get_split_freq,
set_ctcss_tone: alinco_set_ctcss_tone,
get_rit: alinco_get_rit,
get_ptt: alinco_get_ptt,
get_dcd: alinco_get_dcd,
set_func: alinco_set_func,
get_func: alinco_get_func,
set_level: alinco_set_level,
get_level: alinco_get_level,
set_mem: alinco_set_mem,
get_mem: alinco_get_mem,

};

/*
 * Function definitions below
 */