/* * Hamlib CI-V backend - description of the TenTenc OMNI VI * Copyright (c) 2000-2008 by Stephane Fillod * * $Id: omni.c,v 1.9 2008-03-31 14:22:58 aa6e Exp $ * * This library is free software; you can redistribute it and/or modify * it under the terms of the GNU Library General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Improvements by Martin Ewing, AA6E, 3/2008 * This backend should support either the Ten-Tec Omni VI Plus (564) or the * Omni VI (563). Tested on an Omni VI. */ /* Known problems: * * To Do: * Implement vfo split, FSK mode */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include "icom.h" #include "icom_defs.h" #include "frame.h" #include #define OMNIVIP_VFO_ALL (RIG_VFO_A|RIG_VFO_B) #define OMNIVIP_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM) #define OMNIVIP_ALL_RX_MODES (OMNIVIP_OTHER_TX_MODES) #define OMNIVIP_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO) #define OMNIVIP_STR_CAL { 0, { } } int omni6_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt); int omni6_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit); int omni6_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit); static const struct icom_priv_caps omnivip_priv_caps = { 0x04, /* default address */ 0, /* 731 mode */ NULL }; const struct rig_caps omnivip_caps = { .rig_model = RIG_MODEL_OMNIVIP, .model_name = "Omni VI Plus", .mfg_name = "Ten-Tec", .version = "0.2", .copyright = "LGPL", .status = RIG_STATUS_BETA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, // Allow program controlled PTT .dcd_type = RIG_DCD_NONE, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 1200, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 200, .retry = 3, .has_get_func = RIG_FUNC_NONE, .has_set_func = RIG_FUNC_NONE, .has_get_level = RIG_LEVEL_NONE, .has_set_level = RIG_LEVEL_NONE, .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .level_gran = {}, .parm_gran = {}, .preamp = { RIG_DBLST_END, }, .attenuator = { RIG_DBLST_END, }, .max_rit = Hz(9980), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = OMNIVIP_VFO_OPS, .scan_ops = RIG_SCAN_NONE, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 0, 99, RIG_MTYPE_MEM, IC_MIN_MEM_CAP }, RIG_CHAN_END, }, .rx_range_list1 = { RIG_FRNG_END, }, .tx_range_list1 = { RIG_FRNG_END, }, /* These limits measured on Omni VI SN 1A10473 */ .rx_range_list2 = { {kHz(1770),kHz(2330),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(3471),kHz(4030),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(6821),kHz(7338),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(9971),kHz(10530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(13971),kHz(14530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(17971),kHz(18530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(20971),kHz(21530),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(24471),kHz(25030),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, {kHz(27971),kHz(30030),OMNIVIP_ALL_RX_MODES,-1,-1,OMNIVIP_VFO_ALL}, RIG_FRNG_END, }, /* Note: There is no AM mode. */ .tx_range_list2 = { {kHz(1800),MHz(2)-1,OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {kHz(3500),MHz(4)-1,OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {MHz(7),kHz(7300),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {kHz(10100),kHz(10150),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {MHz(14),kHz(14350),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {kHz(18068),kHz(18168),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {MHz(21),kHz(21450),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {kHz(24890),kHz(24990),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, {MHz(28),kHz(29700),OMNIVIP_OTHER_TX_MODES,5000,100000,OMNIVIP_VFO_ALL}, RIG_FRNG_END, }, .tuning_steps = { {OMNIVIP_ALL_RX_MODES, Hz(10)}, // This radio has 10 Hz steps. RIG_TS_END, }, /* mode/filter list, remember: order matters! * Possible XTAL filters: 2.4, 1.8, 0.5, 0.25 kHz - may not all be * present. FM filter is 15 kHz. * We are not supporting the 'FSK' (RTTY) mode at this time. */ .filters = { {RIG_MODE_SSB|RIG_MODE_CW, kHz(2.4)}, {RIG_MODE_FM, kHz(15)}, RIG_FLT_END, }, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void*)&omnivip_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, // icom.c has no get_vfo .set_rit = omni6_set_rit, .get_rit = omni6_get_rit, // icom.c has no get_rit .set_xit = omni6_set_rit, // xit=rit for this rig .get_xit = omni6_get_rit, // (front panel controlled) .set_ptt = omni6_set_ptt, .decode_event = icom_decode_event, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, }; /* * omni6_set_ptt based on icom_set_ptt * Assumes rig!=NULL, rig->state.priv!=NULL */ int omni6_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt) { int retval, sc; sc = ptt == RIG_PTT_ON ? 0x1 : 0x2; /* * Ignore ACK/NAK on this command, because in CW mode, the Omni VI * does not send an ACK. */ retval = icom_transaction (rig, C_OMNI6_XMT, sc, NULL, 0, NULL, NULL); if (retval != RIG_OK) return retval; return RIG_OK; } /* * These 'rit' commands actually deal with an offset frequency. The operator * must select rit on/off or xit on/off manually to apply this offset. * Omni VI's rit uses 9's complement for negative freq, and freqs are in units * of 10 Hz. on the Omni. * Note that Omni VI rejects rit > 9980, but takes rit >= -9990. So the * rit limit should be +/- 9.98 kHz. */ int omni6_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit) { unsigned char freqbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN]; int freq_len, ack_len=sizeof(ackbuf), retval; shortfreq_t rit10; rit10 = rit / 10; // 10 Hz resolution for Omni if (rit10 < 0) rit10 += 10000L; // 9's compl. freq_len = 2; to_bcd(freqbuf, rit10, 2*freq_len); retval = icom_transaction (rig, C_SET_OFFS, -1, freqbuf, freq_len, ackbuf, &ack_len); if (retval != RIG_OK) return retval; if (ack_len != 1 || ackbuf[0] != ACK) { rig_debug(RIG_DEBUG_ERR,"omni6_set_rit: ack NG (%#.2x), " "len=%d\n", ackbuf[0],ack_len); return -RIG_ERJCTED; } return RIG_OK; } /* * Note: icom.c does not provide a get_rit method. It would have been * wrong for the Omni VI, anyway, so we implement it here. */ int omni6_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit) { unsigned char buffer[MAXFRAMELEN]; int buffer_len, retval; shortfreq_t my_rit; retval = icom_transaction (rig, C_RD_OFFS, -1, NULL, 0, buffer, & buffer_len); if (retval != RIG_OK) return retval; if (buffer_len != 3) { rig_debug(RIG_DEBUG_ERR,"omni6_get_rit: wrong length response (%d)\n", buffer_len); return -RIG_ERJCTED; } my_rit = 10*from_bcd(buffer, 2*buffer_len); if (my_rit > 10000L) my_rit -= 100000L; // 9's compl for negatives *rit = my_rit; return RIG_OK; }