2001-01-08 13:37  f4cfe

	* ChangeLog, LICENSE: Initial release

2001-01-07 17:02  javabear

	* yaesu/: ft847.c, ft847.h: minor cleanup

2001-01-06 00:49  javabear

	* yaesu/: ft747.c, ft847.c: added targetable_vfo value to caps

2001-01-05 12:24  f4cfe

	* src/rig.c: * added targetable_vfo support in wrappers for rigs
	that cannot address directly VFOs

2001-01-05 12:22  f4cfe

	* tests/: dumpcaps.c, rigmatrix.c: * added targetable_vfo support

2001-01-05 12:21  f4cfe

	* include/hamlib/rig.h: * added targetable_vfo field in caps

2001-01-05 12:20  f4cfe

	* icom/: frame.c, icom.c: * icom_set_mode fixup (passband not done
	right)

2001-01-05 12:18  f4cfe

	* aor/ar8200.c, icom/ic706.c, kenwood/ts870s.c: * added
	targetable_vfo field in caps

2001-01-04 20:03  javabear

	* yaesu/ft747.c: general cleanup, added _send_priv_cmd

2001-01-04 01:03  javabear

	* yaesu/: ft747.c, ft747.h, ft847.c, ft847.h: Begin to use common
	yaesu code

2001-01-03 23:47  javabear

	* tests/Makefile.am: common yaesu dir

2001-01-03 23:41  javabear

	* Makefile.am, configure.in: common yaesu handling

2001-01-03 23:39  javabear

	* yaesu/: ft747.c, ft747.h, ft847.c, ft847.h: Moved from ft747 and
	ft847 dirs

2001-01-03 22:42  javabear

	* yaesu/Makefile.am: Initial yaesu Makefile

2001-01-03 17:14  f4cfe

	* configure.in: * bumped version number to 1.1.1 * added kenwood
	sub-Makefile

2001-01-03 17:10  f4cfe

	* Makefile.am: * added kenwood/ subdirectory

2000-12-23 02:40  f4cfe

	* kenwood/: Makefile.am, README.kenwood, kenwood.c, kenwood.h,
	ts870s.c: * Initial release

2000-12-21 22:59  javabear

	* yaesu/yaesu.h: nseq uses YAESU_CMD_LENGTH

2000-12-21 19:41  javabear

	* yaesu/yaesu.h: add version tag

2000-12-21 19:36  javabear

	* yaesu/yaesu.h: Initial release, common yaesu declareations etc.

2000-12-21 19:27  javabear

	* ft847/ft847.c: removed old API functions, general cleanup tested
	rig_close and rig_cleanup

2000-12-21 19:16  javabear

	* src/: misc.c, misc.h: removed unused calc_ functions.

2000-12-21 18:56  javabear

	* src/rig.c: rig_cleanup and rig_close not calling backend

2000-12-20 00:33  javabear

	* ft847/ft847.c: Added ft847_send_priv_cmd(), converted some part
	of API to use this. Added _set_mode to work now.  TODO: put
	_send_priv_cmd into yaesu.[ch] so ft747 can use also.  Turned on
	PTT also (stand back)..

2000-12-17 23:17  javabear

	* ft847/: ft847.c, ft847.h: more table driven stuff for ft847.
	cat/ptt/freq being converted.

2000-12-17 16:14  javabear

	* ft847/: ft847.c, ft847.h: converting ft847 to table driven,
	similar to ft747.

2000-12-16 09:13  f4cfe

	* Makefile.am: * remove WANTED from dist

2000-12-12 19:27  javabear

	* tests/testrig.c: Added some new freq/mode combinations.

2000-12-12 19:26  javabear

	* ft747/: ft747.c, ft747.h: Removed static stuff from functions. 
	Also, begin to implement table driven command translation from API
	to rig native. priv now contains a cmd table that is used for
	backend commands towards rig.

2000-12-10 22:19  javabear

	* ft747/: ft747.c, ft747.h: trying different approach to storing
	cmd sequence.  _set_ptt is being converted. Needs tidying up
	though.  Some sequences are complete, and can be read from static
	data. Incomplete sequences will eventually be copied form static
	declaration, and completed in priv data.

2000-12-09 15:50  javabear

	* tests/testrig.c: added ptt handling example, stand back !

2000-12-09 15:48  javabear

	* ft747/ft747.c: minor updates to active vfo handling

2000-12-08 20:03  javabear

	* ft747/ft747.h: some new defines for FT747_VFO_A/B

2000-12-08 20:01  javabear

	* ft747/ft747.c: minor update to active VFO handling in _set_vfo

2000-12-06 20:34  javabear

	* ft747/: ft747.c, ft747.h: 1. Added VFO as target for some set/get
	cmds.  2. ./testrig still runs ok using RIG_VFO_CURR.

2000-12-05 16:04  f4cfe

	* tests/: rigctl.c, testrig.c, testtrn.c: * updates since the new
	API now requires a target VFO to be specified.	  Mainly,
	RIG_VFO_CURR is used, which should ensure the same behaviour	of
	the tests programs as before.

2000-12-05 16:01  f4cfe

	* aor/aor.c, aor/aor.h, icom/icom.c, icom/icom.h, src/rig.c,
	include/hamlib/rig.h: * all the API functions are now targetted to
	a particular VFO.    This is a major change in the library
	interface, and the implementation    is not complete yet
	(especially in the backends), but the API should    be fine.
	Anyway, at this stage of developement, interface design   
	experimenting matters more than completeness.  * added new
	shortfreq_t type for frequencies on 31bits (up to 2GHz)   for use
	by offset/shifts/etc.

2000-12-05 15:52  f4cfe

	* TODO: * more stuff to do

2000-12-05 15:51  f4cfe

	* doc/Makefile.am: * added NOTES in the distribution

2000-12-05 13:32  f4cfe

	* tests/testrig.c: * [sg]et_mode is now responsible for
	setting/getting the passband

2000-12-04 17:45  f4cfe

	* include/config.h.in: * regenerated due to added libgd option

2000-12-04 17:39  f4cfe

	* aor/aor.c, aor/aor.h, icom/frame.c, icom/frame.h, icom/icom.c,
	icom/icom.h, include/hamlib/rig.h, src/rig.c, tests/rigctl.c: *
	removed [sg]et_passband in favor of an enhanced [sg]et_mode which  
	includes the passband, since most rigs tie these parameters
	together   quite often. For exemple, WFM is
	(RIG_MODE_FM,RIG_PASSBAND_WIDE) in Hamlib.    Another set of
	functions will be needed to fine tune aditional    frequency
	response/filters.

2000-12-04 17:28  f4cfe

	* doc/NOTES: Initial release

2000-11-28 16:38  f4cfe

	* configure: * regenerate (libgd check)

2000-11-28 16:36  f4cfe

	* configure.in: * check for libgd, and build rigmatrix accordingly

2000-11-28 16:35  f4cfe

	* tests/Makefile.am: * made rigmatrix build optional

2000-11-28 16:34  f4cfe

	* tests/: dumpcaps.c, rigctl.c: * misc format fixup

2000-11-28 16:33  f4cfe

	* src/rig.c: * cleanup, removed "not implemented" misleading
	comments * added added squelch primitives of DCS/CTCSS * added
	set/get_RIT and rig_get_info wrappers

2000-11-28 16:31  f4cfe

	* include/hamlib/rig.h: * added squelch primitives of DCS/CTCSS *
	added set/get_RIT and rig_get_info()

2000-11-28 16:28  f4cfe

	* include/hamlib/riglist.h: * misc reordering, added Skanti

2000-11-28 16:26  f4cfe

	* icom/ic706.c: * added split/rptr capability

2000-11-28 16:23  f4cfe

	* icom/TODO.icom: some work done

2000-11-25 15:52  javabear

	* tests/testrig.c: more set_freq() examples

2000-11-25 15:49  javabear

	* ft747/: ft747.c, ft747.h: added set/get freq to use generic bcd
	etc

2000-11-25 02:19  javabear

	* ft747/: ft747.h, ft747.c: updated ptt/mode/vfo

2000-11-17 13:11  f4cfe

	* NEWS: Initial release

2000-11-04 15:37  f4cfe

	* INSTALL: new install notes, ala autoconf

2000-11-04 15:35  f4cfe

	* AUTHORS: clarification on license

2000-11-01 17:27  f4cfe

	* tests/: dumpcaps.c, listrigs.c: * load/know more backends

2000-11-01 17:24  f4cfe

	* tests/Makefile.am: * added rigmatrix

2000-11-01 17:23  f4cfe

	* aor/Makefile.am, aor/README.aor, aor/aor.c, aor/aor.h,
	aor/ar8200.c, tests/rigmatrix.c: Initial release

2000-11-01 17:21  f4cfe

	* icom/: frame.c, frame.h: * some cleanup (removed deprecated
	make_cmd_frame_freq and make_cmd_frame_chan)

2000-11-01 17:20  f4cfe

	* icom/README.icom: * misc changes

2000-11-01 17:19  f4cfe

	* TODO: * done some work, still lot to do\!

2000-11-01 17:18  f4cfe

	* PLAN: * cosmetic changes

2000-11-01 17:16  f4cfe

	* Makefile.am, configure, configure.in: * added new AOR backend

2000-10-30 15:45  f4cfe

	* include/hamlib/rig.h: * misc fix of the size of immediate value
	(long long)

2000-10-29 10:35  f4cfe

	* tests/rigctl.c: Initial release

2000-10-29 10:31  f4cfe

	* tests/Makefile.am: * added rigctl

2000-10-29 10:30  f4cfe

	* src/rig.c: * addded wrapper for rig_set_bank * misc fixups

2000-10-29 10:29  f4cfe

	* include/hamlib/rig.h: * misc cleanup

2000-10-29 10:27  f4cfe

	* icom/icom_defs.h: * defined some argument common lengths

2000-10-29 10:26  f4cfe

	* icom/icom.h: * added icom_set_rptr_offs/icom_get_rptr_offs,	   
	  icom_set_split_freq/icom_get_split_freq and	     
	icom_set_split/icom_get_split

2000-10-29 10:25  f4cfe

	* icom/icom.c: * added icom_set_rptr_offs/icom_get_rptr_offs,  
	icom_set_split_freq/icom_get_split_freq and    
	icom_set_split/icom_get_split * also fixed a bug in icom_set_mem,
	and icom_set_bank (invalid arg len)

2000-10-29 04:18  f4cfe

	* ft747/Makefile.am, ft847/Makefile.am: * include missing header
	files in the distribution

2000-10-29 04:17  f4cfe

	* doc/Makefile.am: * include scripts in the distribution. I don't
	know why noinst_SCRIPTS doesn't do it by itself

2000-10-29 04:15  f4cfe

	* configure, configure.in: * Added include paths so 'make
	distcheck' works

2000-10-23 14:59  f4cfe

	* tests/Makefile.am: byebye LD_LIBRARY_PATH, hello unreadability :)

2000-10-23 14:58  f4cfe

	* src/serial.c: * coded in a solution to not have active
	post_write_delay wait loop

2000-10-23 14:56  f4cfe

	* src/rig.c: * misc comments update about CTCSS & DCS

2000-10-23 14:55  f4cfe

	* include/hamlib/riglist.h: * try to be more exhaustive in the rig
	list. Any volounteers ? * cleanup

2000-10-23 14:53  f4cfe

	* include/hamlib/rig.h: * added rig_set_bank() to the API * added
	struct timeval post_write_date to rig_state, so the
	post_write_delay   may not be an active wait loop.  * cleanup

2000-10-23 14:48  f4cfe

	* icom/: ic706.c, icom.c, icom.h, icom_defs.h: * Added some more
	capabilities

2000-10-22 11:19  f4cfe

	* include/: Makefile.am, hamlib/Makefile.am: Initial release

2000-10-22 11:14  f4cfe

	* tests/dumpcaps.c: * API function names changed: *_rpt_* functions
	to *_rptr_*

2000-10-22 11:13  f4cfe

	* tests/Makefile.am: * Added path to shared libs and modules,
	LD_LIBRARY_PATH is history (for now)

2000-10-22 11:09  f4cfe

	* src/Makefile.am: * Added -release option to LDFLAGS so the shared
	lib shows the current numbers

2000-10-22 11:08  f4cfe

	* src/rig.c: * Added "hamlib-doc" source comments, ala
	kernel-doc,gnome-doc.	 See doc/ subdirectory for more info. The
	work is still in progress,    the current comments are pretty
	shallow rigth now, they're still    lacking the valuable
	information like semantics, side effects,    special cases, error
	definitions, etc. that makes a good API documention.	Please help
	commenting, fixing typos and mispellings!  * renamed rig_*_rpt_*
	functions to rig_*_rptr_* to be more uniform * made use of
	setting_t type in *_has_* functions * removed set_volume,
	get_volume, set_squelch, get_squelch,	get_squelch_status,
	set_ant, get_ant, int et_att, get_att,	 set_preamp, get_preamp,
	set_power, and get_power   in favor of set_level/get_level.  *
	set_func takes one more arg for the status (activate or
	desactivate)

2000-10-22 11:02  f4cfe

	* include/hamlib/rig.h: * renamed rig_*_rpt_* functions to
	rig_*_rptr_* to be more uniform * made use of setting_t type in
	*_has_* functions * removed set_volume, get_volume, set_squelch,
	get_squelch,   get_squelch_status, set_ant, get_ant, int et_att,
	get_att,   set_preamp, get_preamp, set_power, and get_power   in
	favor of set_level/get_level.  * set_func takes one more arg for
	the status (activate or desactivate)

2000-10-22 10:55  f4cfe

	* ft747/Makefile.am, ft847/Makefile.am, icom/Makefile.am: * added
	-avoid-version to LDFLAGS for dlopen modules

2000-10-22 10:53  f4cfe

	* configure.in: * added DLTOOL check * added automaked include/ and
	doc/ subdirectories

2000-10-22 10:50  f4cfe

	* Makefile.am: * added include/ and doc/ automaked subdirectories

2000-10-22 10:48  f4cfe

	* doc/: Makefile.am, hamlib-doc, split-man.pl: Initial release

2000-10-16 17:37  f4cfe

	* icom/icom_defs.h: * Various defines renamed (S_SET -> S_CTL) *
	S_LVL_* added

2000-10-16 17:35  f4cfe

	* icom/icom.h: new prototypes (*_level,*_channel)

2000-10-16 17:34  f4cfe

	* icom/icom.c: * more CI-V addresses, RIG_MODEL_IC820 still missing
	* Added icom_[sg]et_channel (untested, not complete) * Added
	icom_[sg]et_level (30% implemented, get_strength tested and OK)

2000-10-16 17:32  f4cfe

	* icom/ic706.c: * Reworked the RIG_MODE_* defines. see rig.h *
	Added has_level caps fields

2000-10-16 17:30  f4cfe

	* icom/frame.c: * Accomodate with new API modes, WFM is FM + Wide
	filter

2000-10-16 17:28  f4cfe

	* icom/Makefile.am: * Listed local include files

2000-10-16 17:27  f4cfe

	* ft747/ft747.c, ft847/ft847.c: Misc changes to accomodate with new
	API, pls check modes handling and new has_level caps field

2000-10-16 17:13  f4cfe

	* tests/dumpcaps.c: Updated after caps has been reworked

2000-10-16 17:10  f4cfe

	* tests/testbcd.c: Added Big Endian tests

2000-10-16 17:08  f4cfe

	* src/rig.c: * Added rig_[sg]et_passband to [sg]et
	narrow/normal/wide filter. These are a good companions to
	rig_[sg]et_mode. Maybe they should be merged?
	
	* Added rig_[sg]et_rpt_offs to set/get repeater offset
	
	* Added rig_split functions: rig_[sg]et_split_freq (set RX and TX
	freq) and rig_[sg]et_split to activate split mode
	
	* Added rig_[gs]et_level, however
	rig_set_preamp/rig_set_att/rig_set_ant et al. will be removed very
	soon.
	
	* Added Memory/VFO handling routines (actually wrappers, like the
	rest)

2000-10-16 16:58  f4cfe

	* include/hamlib/rig.h: * Replaced
	
	* Added rig_has_level/rig_has_set_level (cloned from their *_func
	cousins)
	
	* Reworked the RIG_MODE_* defines. The filter information (narrow,
	normal, wide) has been splited for less complexity. Thus adding
	rig_[sg]et_passband.
	
	* Reworked the vfo_t enum. Main is now an alias for VFO A, Sub for
	VFO B, Sat for VFO C. I'm almost sure it's a wrong assumption.
	Could someone tell if Main is or is not VFO A ?
	
	* Coded in a Memory/VFO handling proposal. Access is done through
	mv_ctl. See mem_vfo_op_e for a list of available operations.
	
	* Renamed [sg]et_tone to [sg]et_dcs and [sg]et_tonesq to
	[sg]et_ctcss.
	rig_?et_volume/rig_?et_squelch/rig_get_squelch_status/rig_get_stren
	gth/rig_?et_ant/rig_?et_att/rig_?et_preamp by
	rig_set_level/rig_get_level. This is a good saving in terms of
	namespace, but a potential gain in messy backend implementation.
	Feedback welcome.

2000-10-16 16:53  f4cfe

	* src/: misc.c, misc.h: * fix in to_bcd(), in case of odd len
	numbers * Added to_bcd_be/from_bcd_be for Big endian BCD
	representation

2000-10-16 16:50  f4cfe

	* src/Makefile.am: * Listed local include files

2000-10-16 16:48  f4cfe

	* include/hamlib/riglist.h: * Added RIG_MODEL_MINISCOUT

2000-10-13 22:55  javabear

	* ft747/ft747.c: minor fixes

2000-10-12 13:37  javabear

	* TODO: cvs mail update works ok :-)

2000-10-12 12:47  javabear

	* TODO: cvs mails to hamlib-cvs-digest

2000-10-11 12:46  f4cfe

	* common/: API_Candidates, Makefile, Makefile.testrig, rig.c,
	rig.h, riglist.h, serial.c, serial.h, testrig.c: files moved to
	../src or ../include/hamlib

2000-10-10 17:17  f4cfe

	* icom/icom_defs.h: added PTT defs and other

2000-10-10 17:13  f4cfe

	* tests/dumpcaps.c: dumps more 'I have/I dont have function XX'

2000-10-10 17:11  f4cfe

	* src/rig.c: * added support for set_trn to activate on the fly the
	transceive mode

2000-10-10 17:09  f4cfe

	* include/hamlib/rig.h: * added [sg]et_rpt_offs to set repeater
	offset * added [sg]et_split_freq to set split frequencies * added
	[sg]et_split to activate split operation * added get_squelch_status
	to get the open/close status of the squelch * added [sg]et_trn to
	activate on the run the transceive mode (PCR1000 can do that)

2000-10-10 17:05  f4cfe

	* include/hamlib/riglist.h: added Icom models in the list

2000-10-10 16:58  f4cfe

	* icom/: icom.c, icom.h: * added tuning step support * added
	rptr_shift setting * added ptt control (untested)

2000-10-08 20:17  javabear

	* aclocal.m4, configure, ft747/ft747.c, ft747/ft747.h,
	ft847/ft847.c, ft847/ft847.h, icom/frame.c, icom/ic706.c,
	include/hamlib/rig.h, src/rig.c, src/serial.c, src/serial.h,
	tests/dumpcaps.c, tests/testrig.c: added post_write_delay

2000-10-08 18:06  javabear

	* ft747/ft747.c: merge with TRN stuff and add some set/get_mode and
	vfo stuff

2000-10-08 17:58  javabear

	* ft747/ft747.h: API updates - added set/get_mode

2000-10-08 16:57  f4cfe

	* ft747/ft747.c, ft847/ft847.c: rig.h is in include/hamlib, added
	dynamic loading support and set transceive cap to off

2000-10-08 16:48  f4cfe

	* tests/testrig.c: added dynamic loading support, and
	rig_get_strength call

2000-10-08 16:47  f4cfe

	* tests/Makefile.am: renamed printcaps to dumpcaps, added listrigs,
	testtrn rules

2000-10-08 16:46  f4cfe

	* src/serial.h: added fread_block

2000-10-08 16:46  f4cfe

	* src/serial.c: added fread_block for file buffered access

2000-10-08 16:45  f4cfe

	* src/rig.c: * added dynamic loading support with new data struct
	for known rig list, * keep track of opened rigs
	(add_opened_rig/remove_opened_rig/foreach_opened_rig), *
	misunderstanding on RIG_ENIMPL, this is RIG_ENAVAIL in most cases,
	* added support for file buffered access (opt.), * added
	rig_set_trn to turn on/off transceive support

2000-10-08 16:43  f4cfe

	* src/misc.h: added Hold_Decode/Unhold_Decode macros to rule
	receiving

2000-10-08 16:43  f4cfe

	* src/misc.c, tests/testbcd.c: include moved

2000-10-08 16:41  f4cfe

	* src/Makefile.am: added register.c (dynamic loading) and event.c
	(async notification from rig)

2000-10-08 16:39  f4cfe

	* icom/icom.h: added new caps prototypes

2000-10-08 16:38  f4cfe

	* icom/icom.c: * added added dynamic loading support, * added CI-V
	ID list, * added generic
	icom_set_mode,icom_get_mode,icom_set_vfo,icom_get_vfo,icom_get_stre
	ngth,icom_decode_event

2000-10-08 16:37  f4cfe

	* icom/ic706.c: * headers moved, * added rig transceive cap On, *
	made use of MHz,KHz macros, * added get_strength and decode_event
	to ic706iig

2000-10-08 16:35  f4cfe

	* icom/frame.h: added
	read_icom_frame,icom2hamlib_mode,hamlib2icom_mode

2000-10-08 16:26  f4cfe

	* icom/frame.c: * read_icom_block now uses file buffered access, *
	added read_icom_frame which read a whole CI-V frame (until
	receiving EOM), * added hamlib2icom_modeand icom2hamlib_mode
	functions to convert from one representation to another

2000-10-08 16:24  f4cfe

	* configure.in: include/rig.h moved to include/hamlib/rig.h, added
	version defines

2000-10-08 16:23  f4cfe

	* configure: regenrated from configure.in (mainly include/rig.h
	moved to include/hamlib/rig.h)

2000-10-08 16:21  f4cfe

	* tests/: dumpcaps.c, printcaps.c: printcaps renamed to dumpcaps

2000-10-08 16:17  f4cfe

	* lib/usleep.c, src/event.c, src/event.h, src/register.c,
	tests/listrigs.c, tests/testtrn.c: Initial release

2000-10-08 16:16  f4cfe

	* include/: rig.h, riglist.h: include files moved again (to
	include/hamlib)

2000-10-08 16:15  f4cfe

	* include/hamlib/: rig.h, riglist.h: include files moved again

2000-10-07 15:52  javabear

	* README: updated lib names for backend to libhamlib-xxxxx.so

2000-10-01 19:01  javabear

	* ft747/: ft747.h, ft747.c: added ft747_open and ft747_close

2000-10-01 18:49  javabear

	* ft847/: ft847.h, ft847.c: added ft847_open and ft847_close to
	enable CAT ON/OFF

2000-10-01 16:38  f4cfe

	* AUTHORS: Initial release

2000-10-01 09:31  f4cfe

	* TODO: Made the list longer

2000-10-01 09:28  f4cfe

	* ft747/Makefile, ft847/Makefile, icom/Makefile, Makefile:
	Deprecated by autoconf/automake

2000-10-01 09:24  f4cfe

	* src/: serial.c, serial.h: Moved from ../common

2000-10-01 07:53  f4cfe

	* tests/testrig.c: Moved from ../common

2000-10-01 07:52  f4cfe

	* tests/: Makefile.am, printcaps.c, testbcd.c: Initial release

2000-10-01 07:47  f4cfe

	* ft747/Makefile.am, ft847/Makefile.am: Initial release

2000-10-01 07:45  f4cfe

	* include/: rig.h, riglist.h: Moved from ../common

2000-10-01 07:41  f4cfe

	* config.guess, Makefile.am, aclocal.m4, config.sub, configure,
	configure.in, install-sh, ltconfig, ltmain.sh, missing,
	mkinstalldirs, include/config.h.in: Initial release

2000-10-01 07:37  f4cfe

	* icom/icom.h: Helper functions moved to frame.h

2000-10-01 07:37  f4cfe

	* icom/icom.c: Moved frame handling to frame.c Renamed
	bcd2freq/freq2bcd to from_bcd/to_bcd Coded and tested icom_get_freq
	Made use of generic icom_transaction

2000-10-01 07:33  f4cfe

	* icom/ic706.c: added icom_get_freq capability

2000-10-01 07:32  f4cfe

	* icom/Makefile.am: Initial release

2000-10-01 07:31  f4cfe

	* icom/: frame.c, frame.h: Initial release, some functions gathered
	from icom.c

2000-10-01 07:29  f4cfe

	* src/rig.c: Moved from ../common Added more wrappers, coded in
	mW2power power2mW Added rig_set_debug/rig_need_debug/rig_debug
	Various fixes

2000-10-01 07:26  f4cfe

	* src/Makefile.am: Initial release

2000-10-01 07:25  f4cfe

	* src/: misc.c, misc.h: Initial release, functions gathered from
	serial.c and others

2000-09-28 22:33  javabear

	* common/Makefile: better libhamlib.so version :-)

2000-09-28 22:29  javabear

	* common/rig.c: added printf's to confirm rig.c (hamlib) is being
	called ok

2000-09-28 22:21  javabear

	* common/rig.c: alternative rig_base declaration removes references
	to rig_caps at compile time. should populate it another way -- FS

2000-09-28 22:15  javabear

	* common/: Makefile, Makefile.testrig, rig.c: makefile for testing
	testrig linking

2000-09-28 22:12  javabear

	* common/testrig.c: added	printf("testrig:main() has been
	called \n"); for testing linking

2000-09-27 19:43  f4cfe

	* common/serial.c: added 2400bauds support

2000-09-27 19:42  f4cfe

	* common/rig.c: added new wrappers

2000-09-27 19:41  f4cfe

	* common/rig.h: augmented API

2000-09-24 19:02  javabear

	* Makefile: removed "make verify". Added reference to
	common/Makefile

2000-09-24 18:49  javabear

	* common/: Makefile, Makefile: make, make install, and make clean
	work ok, using ./lib and ./include directories also.

2000-09-24 18:32  javabear

	* common/Makefile: starting on libhamlib Makefile, added ./lib and
	./include under common

2000-09-24 18:30  javabear

	* common/rig.h: added VFO types to enum

2000-09-23 22:37  javabear

	* common/rig.h: added typedef enum ptt_type_e ptt_type_t;

2000-09-23 22:36  javabear

	* ft747/ft747.h: starting to implement set/get pairs

2000-09-23 22:35  javabear

	* ft747/ft747.c: started ft747_set_ptt and ft747_set_vfo

2000-09-23 21:19  javabear

	* README.developer: updated code snippet example

2000-09-23 21:15  javabear

	* README: describe frontend/backend structure

2000-09-23 00:10  javabear

	* common/Makefile: test making a shared lib  for the frontend -
	make hamlib

2000-09-22 23:55  javabear

	* common/Makefile: test making a shared lib (at last) for the
	frontend - more todo

2000-09-22 22:49  javabear

	* ft847/ft847.h: [no log message]

2000-09-22 22:48  javabear

	* ft847/ft847.c: updated rig_caps structure

2000-09-22 21:45  javabear

	* common/: serial.c, serial.h: added usleep to read_sleep()

2000-09-22 21:26  javabear

	* common/Makefile: added testrig to Makefile, no linking yet

2000-09-22 21:17  javabear

	* common/testrig.c: added some set/get examples with return code
	checking

2000-09-22 19:35  javabear

	* ft747/ft747.c: added extra rig caps

2000-09-22 19:34  javabear

	* ft747/ft747.h: minor updates

2000-09-21 01:46  f4cfe

	* icom/: ic706.c, icom.c: RIG_E* modified, added tuning_step

2000-09-21 01:44  f4cfe

	* common/: rig.c, rig.h, serial.c: RIG_E modified, added rigerror()
	and new field tuning_steps available on rig.

2000-09-20 01:13  f4cfe

	* common/riglist.h: added RIG_MODEL_IC731

2000-09-20 01:12  f4cfe

	* common/: rig.c, rig.h: added rig_has_func() and misc fields

2000-09-19 02:06  f4cfe

	* icom/icom.h: function renamed

2000-09-19 02:06  f4cfe

	* icom/icom_defs.h: new defs

2000-09-19 02:04  f4cfe

	* icom/icom.c: added return codes and read_icom_block()

2000-09-19 02:02  f4cfe

	* THANKS: Initial release

2000-09-19 02:01  f4cfe

	* common/rig.h: added error code def's, ptt_type_e, func support
	(AGC, NB, etc.), vfo_comp, renamed functions, changed way of
	getting return value of rig_get_*

2000-09-19 02:00  f4cfe

	* common/rig.c: added error code returns, vfo compensation

2000-09-19 01:59  f4cfe

	* common/testrig.c: function calls renamed

2000-09-19 01:59  f4cfe

	* common/serial.c: added error code returns

2000-09-19 01:58  f4cfe

	* common/serial.h: write_block2 renamed to write_block

2000-09-18 20:25  javabear

	* common/: rig.h, rig.c: still thinking about set/get strategy

2000-09-18 19:25  javabear

	* common/riglist.h: added extern const struct rig_caps ft747_caps;

2000-09-18 19:16  javabear

	* common/serial.h: cleanup comments

2000-09-17 22:59  javabear

	* common/testrig.c: Example of setting rig Main VFO to 439.700 Mhz
	FM

2000-09-17 22:47  javabear

	* common/: rig.h, rig.c: added 3 more cmd_* for API examples

2000-09-16 23:43  javabear

	* ft847/ft847.c: converting to frontend/backend style

2000-09-16 22:21  javabear

	* ft847/ft847.h: changing to frontend/backend style

2000-09-16 22:03  javabear

	* common/rig.c: fixed typos, added &ft747_caps in rig_caps

2000-09-16 19:06  javabear

	* common/serial.h: removed open_port() and write_block()

2000-09-16 18:56  javabear

	* common/serial.c: removed open_port() and write_block()

2000-09-16 18:15  javabear

	* ft747/: ft747.h, ft747.c: converting to frontend/backend
	structure compiles ok

2000-09-16 16:37  javabear

	* common/rig.h: missing ; in some enums

2000-09-16 16:23  javabear

	* common/rig.h: fixed some typos, added  3 more candidates for API

2000-09-16 13:14  javabear

	* common/serial.c: removed old open_port2() using old rig_caps

2000-09-16 12:58  javabear

	* common/API_Candidates: frontend API clarification

2000-09-15 21:00  f4cfe

	* ic706/: Makefile, README.icom706, TODO.ic706, ic706.c, ic706.h:
	moved to icom/

2000-09-15 20:54  f4cfe

	* common/riglist.h: moved in extern defs of rig_caps

2000-09-15 20:49  f4cfe

	* icom/icom.c: Icom generic stuff, added in CI-V frame maker
	helpers

2000-09-15 20:46  f4cfe

	* icom/ic706.c: stripped down and kept only ic706 rig tables and
	functions

2000-09-15 20:45  f4cfe

	* icom/icom_defs.h: Initial release, holds CI-V constants

2000-09-15 20:43  f4cfe

	* icom/: Makefile, README.icom, TODO.icom, icom.h: moved from
	../ic706, made Icom CI-V generic

2000-09-15 20:37  f4cfe

	* common/rigcaps.h: cut/pasted into rig.h

2000-09-15 20:32  f4cfe

	* common/testrig.c: now uses the rig_init()/rig_open() sequence

2000-09-15 20:29  f4cfe

	* common/: serial.c, serial.h: added serial_open() helper for the
	frontend       write_block2()/read_block() handle
	timeout/write_delay features

2000-09-15 20:25  f4cfe

	* common/rig.c: now compiles, added (serial) port opening

2000-09-15 20:23  f4cfe

	* common/rig.h: cut/pasted rigcaps.h, major cleanup, updated some
	data structs (rig, rig_state)

2000-09-15 20:21  f4cfe

	* common/Makefile: remove "-ansi" define which breaks usleep() and
	CRTSCTS

2000-09-15 20:09  f4cfe

	* TODO: some work has been done, but there's more to do!

2000-09-15 20:08  f4cfe

	* PLAN: [no log message]

2000-09-15 00:08  javabear

	* common/API_Candidates: frontend reduction on backend function
	namespace - phew !!

2000-09-13 19:52  f4cfe

	* common/: Makefile, rig.h: Updated for the new frontend/backend
	caps

2000-09-13 19:50  f4cfe

	* common/: API_Candidates, rig.c, rigcaps.h, riglist.h, testrig.c:
	Initial revision, very alpha stage

2000-09-13 19:48  f4cfe

	* API, COPYING, PLAN: file creation, basically scratch notes

2000-09-13 19:44  f4cfe

	* ic706/: Makefile, TODO.ic706, ic706.c, ic706.h: file creation,
	not in a compilable/working state

2000-09-13 19:42  f4cfe

	* ic706/README.icom706: file creation

2000-09-04 14:58  javabear

	* ft747/ft747.c, ft747/ft747.h, ft747/test/testlibft747.c,
	ft847/test/testlibft847.c: adding rig_caps stuff

2000-09-04 12:51  javabear

	* common/rig.h, common/serial.c, common/serial.h, ft847/ft847.c,
	ft847/ft847.h, ft847/test/testlibft847.c: adding rig_caps
	functionality

2000-09-04 10:11  javabear

	* TODO: add capabilities and preferences

2000-09-03 23:07  javabear

	* ft747/ft747.c: adding rig_caps stuff

2000-09-03 23:06  javabear

	* ft747/test/testlibft747.c: adding rig_cap stuff

2000-09-03 22:58  javabear

	* ft747/ft747.h: adding rig_caps stuff

2000-09-03 22:50  javabear

	* common/rig.h: added GPL stuff and comments

2000-09-03 22:45  javabear

	* ft847/test/testlibft847.c: starting to add rig_caps stuff.

2000-09-03 22:44  javabear

	* ft847/test/testlibft847.c: starting to add rig_caps stuff

2000-09-03 22:36  javabear

	* ft847/: ft847.c, ft847.h: starting to add rig_caps stuff

2000-09-03 22:19  javabear

	* common/rig.h: initial capabilities stuff

2000-09-03 18:44  javabear

	* ft847/test/testlibft847.c: adding capabilities

2000-09-03 18:38  javabear

	* ft747/test/Makefile: added  -I$(COMMON_DIR) to find rig.h

2000-09-03 18:36  javabear

	* ft847/test/Makefile: added -I$(COMMON_DIR) to find rig.h

2000-08-20 16:52  javabear

	* README, README.developer: Updated docs to point to 
	http://sourceforge.net/projects/hamlib/ and added a C code snippet
	on how to use the API.

2000-08-19 11:21  javabear

	* README.license: included full GPL license

2000-08-18 23:07  javabear

	* common/serial.c, common/serial.h, ft747/ft747.c, ft747/ft747.h,
	ft747/test/testlibft747.c, ft747/test/testlibft747.h,
	ft847/ft847.c, ft847/ft847.h, ft847/test/testlibft847.c,
	ft847/test/testlibft847.h: added GPL license info

2000-08-18 22:14  javabear

	* README.license: added README.license for GPL

2000-08-08 20:26  javabear

	* ft847/README.ft847: describe faulty yaesu documentation

2000-08-08 20:24  javabear

	* ft847/: ft847.c, ft847.h: adding dcs tables and repeater offset
	in Hz

2000-08-03 21:48  javabear

	* common/: serial.h, serial.c: void dump_hex(unsigned char *ptr,
	int size, int width);

2000-07-30 00:09  javabear

	* ft847/ft847.h: cleanup

2000-07-30 00:06  javabear

	* ft747/ft747.c, ft847/ft847.c, common/serial.c: cleanup

2000-07-30 00:03  javabear

	* ft847/test/testlibft847.c, ft747/test/testlibft747.c,
	ft747/test/testlibft747.c: cleanup

2000-07-29 23:35  javabear

	* common/: serial.h, serial.c: calc_packed_from_char and
	calc_char_from_packed now here

2000-07-29 23:26  javabear

	* ft847/ft847.c: calc_freq_from_packed4 is about to be replaced

2000-07-29 23:05  javabear

	* ft747/test/testlibft747.c: removed dump_hex from here..

2000-07-29 23:02  javabear

	* ft747/ft747.c: removed unwanted debug printf's

2000-07-29 22:57  javabear

	* common/serial.c: added generic hex dump routine, static void
	dump_hex(unsigned char *ptr, int size, int width);

2000-07-29 21:53  javabear

	* ft847/ft847.c: minor

2000-07-29 21:03  javabear

	* ft847/ft847.c: added routines for dec <-> packed decimal
	conversion

2000-07-29 21:02  javabear

	* ft847/test/testlibft847.c: trying some cms_set_freq_xxx commands

2000-07-29 21:00  javabear

	* common/serial.c: dump raw hex data when writing and reading

2000-07-29 19:29  javabear

	* ft847/ft847.h: fix typo

2000-07-29 19:28  javabear

	* ft847/ft847.c: now set sat rx and tx freq and mode also

2000-07-29 18:15  javabear

	* TODO: add scanning todo

2000-07-29 18:13  javabear

	* ft847/test/testlibft847.c: starting on cmd_set_freq commands now

2000-07-29 18:12  javabear

	* ft847/ft847.h: starting on cmd_set commands now

2000-07-29 18:11  javabear

	* ft847/ft847.c:  starting with the cmd_set commands now

2000-07-29 15:31  javabear

	* ft847/test/testlibft847.c:	 frq =
	cmd_get_freq_mode_status_main_vfo(fd, &mode);

2000-07-29 15:30  javabear

	* ft847/ft847.c: long int cmd_get_freq_mode_status_main_vfo(int fd,
	unsigned char *mode)

2000-07-29 15:26  javabear

	* ft847/ft847.h: long int cmd_get_freq_mode_status_main_vfo(int fd,
	unsigned char *mode);

2000-07-28 21:39  javabear

	* ft847/test/testlibft847.c: playing with test routines

2000-07-28 21:38  javabear

	* ft847/ft847.c: working out freq conversion, unfinished

2000-07-28 20:47  javabear

	* ft847/ft847.h: use #defines for MODE_XXX used in case statements

2000-07-28 19:52  javabear

	* ft747/ft747.h: cannot use const int in case statements ?? so use
	#define instead

2000-07-28 19:50  javabear

	* ft747/test/testlibft747.c: use MODE_xx defines

2000-07-28 17:11  javabear

	* README.developer: using CVS instead of RCS directories

2000-07-27 22:09  javabear

	* ft747/test/testlibft747.c: removed cmd_get_update

2000-07-27 22:05  javabear

	* ft747/: ft747.h, ft747.c: removed cmd_get_update

2000-07-27 21:02  javabear

	* ft847/: ft847.h, test/testlibft847.c, ft847.c: had rx and tx
	status swapped (document error?)

2000-07-27 20:20  javabear

	* ft847/ft847.c: using read_sleep from serial.h

2000-07-27 19:57  javabear

	* ft747/ft747.c: use read_sleep now from serial.h

2000-07-27 19:48  javabear

	* common/: serial.h, serial.c: added read_sleep

2000-07-26 20:01  javabear

	* ft747/ft747.c: use while(1) and break

2000-07-26 19:52  javabear

	* ft747/test/testlibft747.c: read uses while(1) and break

2000-07-26 19:49  javabear

	* ft747/test/testlibft747.h: use ft747 on serial port /dev/ttyS0

2000-07-26 19:47  javabear

	* ft747/test/Makefile: use common dir for serial stuff

2000-07-26 19:43  javabear

	* ft747/ft747.c: using rig_open and rig_close and serial.h

2000-07-26 19:42  javabear

	* ft747/ft747.h: added rig_open and rig_close

2000-07-26 19:26  javabear

	* ft747/Makefile: added ../common as object path

2000-07-26 18:36  javabear

	* ft847/ft847.c: all reads use while (1) and break

2000-07-25 19:37  javabear

	* ft847/test/testlibft847.c: updated test()

2000-07-25 19:34  javabear

	* ft847/ft847.c: changed cmd_get_rx_status, must do tx also

2000-07-25 19:09  javabear

	* ft847/test/testlibft847.c: added sat-on and sat_off to test

2000-07-25 19:00  javabear

	* ft847/ft847.c: fixed cmd_sat_on / off

2000-07-25 18:14  javabear

	* ft847/ft847.h: added rig_open and rig_close

2000-07-25 17:55  javabear

	* ft847/test/testlibft847.c: use rig_open and rig_close

2000-07-25 17:42  javabear

	* ft847/README.ft847: fixed some typos

2000-07-24 20:23  javabear

	* ft847/test/: Makefile, RESULT.example, testlibft847.c,
	testlibft847.h: initial import

2000-07-24 20:17  javabear

	* ft847/: Makefile, README.ft847, TODO.ft847, ft847.c, ft847.h:
	initial import

2000-07-24 20:01  javabear

	* common/: Makefile, serial.c, serial.h: initial import

2000-07-24 19:46  javabear

	* TODO: add some things

2000-07-24 19:34  javabear

	* Makefile: initial top level makefile

2000-07-18 18:28  frank

	* ft747/Makefile: [no log message]

2000-07-18 17:01  frank

	* ft747/Makefile: added build_all ,cleanall and verify targets

2000-07-18 16:46  frank

	* TODO, TODO: [no log message]

2000-07-18 16:42  frank

	* TODO: Initial revision

2000-07-18 16:35  frank

	* INSTALL: Initial revision

2000-07-18 16:26  frank

	* README.developer: [no log message]

2000-07-18 16:19  frank

	* README.developer: [no log message]

2000-07-18 16:16  frank

	* README.developer: [no log message]

2000-07-18 16:09  frank

	* README.developer: Initial revision

2000-07-18 15:53  frank

	* README, TODO.skeleton, ft747/Makefile, ft747/README.ft747,
	ft747/TODO.ft747, ft747/ft747.c, ft747/ft747.h,
	ft747/test/Makefile, ft747/test/testlibft747.c,
	ft747/test/testlibft747.h: Initial revision