/*
 *  Hamlib Kachina backend - 505DSP description
 *  Copyright (c) 2001-2004 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#include <stdlib.h>

#include <hamlib/rig.h>
#include "kachina.h"
#include <tones.h>

#define K505DSP_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define K505DSP_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define K505DSP_AM_TX_MODES RIG_MODE_AM

#define K505DSP_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TONE|RIG_FUNC_COMP)

#define K505DSP_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_IF|RIG_LEVEL_RAWSTR|RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD|RIG_LEVEL_BKINDL|RIG_LEVEL_CWPITCH)

#define K505DSP_PARM_ALL (RIG_PARM_NONE)

#define K505DSP_VFO (RIG_VFO_A)

#define dBm2S9(x) ((x)+73)

#define K505DSP_STR_CAL { 2, { \
        {    0, dBm2S9(-130) }, \
        {  127, dBm2S9(20) }, \
    } }

/*
 * 505DSP rig capabilities.
 *
 * protocol is documented at
 *      http://www.kachina-az.com/develope.htm
 *
 * TODO:
 *  - so many ...
 */
struct rig_caps k505dsp_caps =
{
    RIG_MODEL(RIG_MODEL_505DSP),
    .model_name = "505DSP",
    .mfg_name =  "Kachina",
    .version =  BACKEND_VER ".0",
    .copyright =  "LGPL",
    .status =  RIG_STATUS_STABLE,
    .rig_type =  RIG_TYPE_COMPUTER,
    .ptt_type =  RIG_PTT_RIG,
    .dcd_type =  RIG_DCD_RIG,
    .port_type =  RIG_PORT_SERIAL,
    .serial_rate_min =  9600,
    .serial_rate_max =  9600,
    .serial_data_bits =  8,
    .serial_stop_bits =  1,
    .serial_parity =  RIG_PARITY_NONE,
    .serial_handshake =  RIG_HANDSHAKE_NONE,
    .write_delay =  0,
    .post_write_delay =  0,
    .timeout =  200,
    .retry =  2,

    .has_get_func =  K505DSP_FUNC,
    .has_set_func =  K505DSP_FUNC,
    .has_get_level =  RIG_LEVEL_RAWSTR,
    .has_set_level =  RIG_LEVEL_SET(K505DSP_LEVEL_ALL),
    .has_get_parm =  K505DSP_PARM_ALL,
    .has_set_parm =  RIG_PARM_SET(K505DSP_PARM_ALL),
    .level_gran =  {},                 /* FIXME: granularity */
    .parm_gran =  {},
    .ctcss_list =  common_ctcss_list,
    .dcs_list =  NULL,
    .preamp =   { 10, RIG_DBLST_END },
    .attenuator =   { 20, RIG_DBLST_END },
    .max_rit =  Hz(9900),
    .max_xit =  Hz(0),
    .max_ifshift =  Hz(1270),
    .targetable_vfo =  0,
    .transceive =  RIG_TRN_OFF,
    .bank_qty =   0,
    .chan_desc_sz =  0,

    .chan_list =  {
        RIG_CHAN_END,
    },

    .rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
    .tx_range_list1 =  { RIG_FRNG_END, },
    .rx_range_list2 =  {
        {kHz(30), MHz(30), K505DSP_ALL_MODES, -1, -1, K505DSP_VFO},
        RIG_FRNG_END,
    },
    .tx_range_list2 =  {
        {kHz(1800), MHz(2) - 100, K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {kHz(1800), MHz(2) - 100, K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {kHz(3500), MHz(4) - 100, K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {kHz(3500), MHz(4) - 100, K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {MHz(7), kHz(7300), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {MHz(7), kHz(7300), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {kHz(10100), kHz(10150), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {kHz(10100), kHz(10150), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {MHz(14), kHz(14350), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {MHz(14), kHz(14350), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {kHz(18068), kHz(18168), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {kHz(18068), kHz(18168), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {MHz(21), kHz(21450), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {MHz(21), kHz(21450), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {kHz(24895), kHz(24995), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {kHz(24895), kHz(24995), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        {MHz(28), kHz(29700), K505DSP_OTHER_TX_MODES, W(10), W(100), K505DSP_VFO},
        {MHz(28), kHz(29700), K505DSP_AM_TX_MODES, W(4), W(25), K505DSP_VFO},
        RIG_FRNG_END,
    },
    .tuning_steps =  {
        {K505DSP_ALL_MODES, 1}, /* FIXME: add other ts */
        RIG_TS_END,
    },
    /* mode/filter list, remember: order matters! */
    .filters =  {
        {RIG_MODE_SSB, kHz(2.4)},
        {RIG_MODE_SSB, kHz(2.7)},
        {RIG_MODE_SSB, kHz(2.1)},
        {RIG_MODE_SSB, kHz(3.5)},
        {RIG_MODE_SSB, kHz(1.7)},
        {RIG_MODE_CW, kHz(1)},
        {RIG_MODE_CW, Hz(500)},
        {RIG_MODE_CW, kHz(2.4)},
        {RIG_MODE_CW, Hz(200)},
        {RIG_MODE_CW, Hz(100)},
        {RIG_MODE_AM, kHz(6)},
        {RIG_MODE_FM, kHz(6)},
        RIG_FLT_END,
    },
    .str_cal = K505DSP_STR_CAL,

    .set_freq =  kachina_set_freq,
    .set_mode =  kachina_set_mode,
    .set_ptt = kachina_set_ptt,

    .get_level =  kachina_get_level,
    .hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};

/*
 * Function definitions below
 */