mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
11 880 Commity
58 Gałęzie
32 Tagi
50 MiB
Wykres commitów

274 Commity (ffb61c29a5aa0eca95d4cf62e3cb15c610a223ce)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 996dbbfa1a Remove override of PKTUSB mode for Icom rigs -- don't think we need this 
Was causing mode toggling on IC7300 during PTT transitions in JTDX
 2021-08-28 10:21:16 -05:00
Mike Black W9MDB 06513a6869 Remove another unneeded vfo swap from icom rigs 
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
 2021-08-27 17:24:31 -05:00
Mike Black W9MDB 547bd0fb55 Fix ANT get/set for IC756Pro series 
https://github.com/Hamlib/Hamlib/issues/774
 2021-08-22 16:40:48 -05:00
Mike Black W9MDB 014bc04ddf Fix Icom rigs to use 0x25 command if capable 
Fixes #1 and and #2 in the issue
https://github.com/Hamlib/Hamlib/issues/762
 2021-08-13 07:42:39 -05:00
Mike Black W9MDB 4bfd71f91f Fix Icom split and implement reverse split 
These should work now from rigctl and via the API
S VFOB 1 VFOA
S Sub 1 Main
https://github.com/Hamlib/Hamlib/issues/754
 2021-08-02 23:37:31 -05:00
Mike Black W9MDB 756f8052fc Minimize 0x25cmdfails resets to only when satmode changes 
https://github.com/Hamlib/Hamlib/issues/741
 2021-07-15 10:19:33 -05:00
Mike Black W9MDB 6bdb82bc54 Fix some vfo swapping issues for Icom rigs 
https://github.com/Hamlib/Hamlib/issues/734
 2021-07-08 13:14:42 -05:00
Mike Black W9MDB 65c77953f8 Add MainA/B SubA/B to icom.c 
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 17:04:24 -05:00
Mike Black W9MDB dd0187ede6 Fix Icom rig 0x25 command for set mode with data and no width change 
Fix Icom rigs not working with rigtctld and 0x25 command
https://github.com/Hamlib/Hamlib/issues/733
 2021-07-03 22:16:33 -05:00
Mike Black W9MDB 763e18fa42 Fix get_mode_with_data for IC7800 as it can set but not read mode with 0x26 command 
https://github.com/Hamlib/Hamlib/issues/725
 2021-06-14 07:52:29 -05:00
Mike Black W9MDB f41bcaa71a Add IC-575 rig 2021-06-03 16:13:58 -05:00
Mikael Nousiainen 263c16984a Attempt to handle asynchronously pushed Icom CI-V frames (transceive and spectrum data) as these frame will get interleaved with command responses 2021-05-30 01:36:49 +03:00
Mikael Nousiainen 12527581b0 Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs. 2021-05-27 10:12:01 +03:00
Mikael Nousiainen b4ba22d369 Implemented initial abstraction for spectrum scope data and support for Icom spectrum data output. The abstraction is based on common features of both Icom and Kenwood rigs. Added TRANSCEIVE func and enumeration of supported AGC levels. Work in progress. 2021-05-26 23:40:53 +03:00
Mike Black W9MDB e84b8a3c99 Add special check for IC821H in icom_set_vfo 
Seems the IC821H reverses Main/Sub logic when in satmode
Remove IC821 from riglist.h and icom.c -- not used
https://github.com/Hamlib/Hamlib/issues/693
 2021-05-07 08:25:54 -05:00
Mike Black W9MDB 2dd87806cf Remove 3 second sleep from icom.c powerup 2021-04-30 15:59:43 -05:00
Mike Black W9MDB 9a82ebf652 Make icom.c 0x25 cmd check only try once 
https://github.com/Hamlib/Hamlib/issues/685
 2021-04-27 10:00:10 -05:00
Mike Black W9MDB 870b9ca748 In icom.c add check for current vfo to avoid vfo swapping 
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
 2021-04-19 09:51:58 -05:00
Mike Black W9MDB cd82a2c008 In icom.c fix reading VFOB width when 0 and set to VFOA width 
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
 2021-04-18 22:46:50 -05:00
Mike Black W9MDB 7ea4fd17aa Fix icom.c default vfo to usa VFOA/Main as appropriate 
https://github.com/Hamlib/Hamlib/issues/654
 2021-04-08 22:37:36 -05:00
Michael Black W9MDB fffaf27f87 Change icom.c to use Main instead of Main_A and Sub instead of Main_B 
https://github.com/Hamlib/Hamlib/issues/637
 2021-03-30 11:48:25 -05:00
Michael Black W9MDB 4135a65503 Add TARGETABLE_FREQ and TARGETABLE mode to IC7300 IC7610 IC7800 IC785X IC9700 
This reduces VFO swapping during get_freq and get_mode operations
Log4OMV2 2.0.12 supports vfo mode using new get_vfo_info call
New debug level RIG_DEBUG_CACHE as it can get very verbose
https://github.com/Hamlib/Hamlib/issues/626
 2021-03-26 10:54:11 -05:00
Michael Black W9MDB f0a82fa2bf Fix icom.c vfo detection 
https://github.com/Hamlib/Hamlib/issues/624
 2021-03-22 07:54:46 -05:00
Michael Black W9MDB 80e199b302 Add satmode detection for Icom rigs like IC9700 
In satmode VFOB/Sub now maps to SubA (2nd VFO)
https://github.com/Hamlib/Hamlib/issues/621
 2021-03-20 08:07:16 -05:00
Michael Black W9MDB 950163f1a4 Rigs like IC9700 with MainA/B will have VFOA/Main mapped to MainA and VFOB/Sub mapped to MainB 
No known use for SubA/SubB yet
https://github.com/Hamlib/Hamlib/issues/621
 2021-03-19 23:36:33 -05:00
Michael Black W9MDB c1277b170e Fix Icom icom_get_usb_echo_off to read the freq response when echo is on 
This takes into account whatever the response time of the rig is
https://github.com/Hamlib/Hamlib/issues/615
 2021-03-18 22:46:45 -05:00
Michael Black W9MDB 0942553687 Fix icom_get_raw_buf 
https://github.com/Hamlib/Hamlib/issues/612#issuecomment-800404923
 2021-03-16 12:29:01 -05:00
Michael Black W9MDB d66e0b9807 Narrow the Icom NAK packet check to only 6 byte frames 
https://github.com/Hamlib/Hamlib/issues/607
 2021-03-14 16:43:17 -05:00
Michael Black W9MDB dff7bdd7a7 For icom recognize bad command return packets e.g. fe fe e0 50 fa fd 
https://github.com/Hamlib/Hamlib/issues/607
 2021-03-13 08:03:53 -06:00
Michael Black W9MDB 803a8d9e5e Fix icom.c logic to not reject good answers 
https://github.com/Hamlib/Hamlib/issues/596
 2021-03-10 11:49:47 -06:00
Michael Black W9MDB ef2e8a4d94 Change all icom calls to explicitly check for ACK/NAK 
If neither is received a timeout error occurs so a retry will be done
Serial corruption was causing NAK rejects which was the wrong way to handle it
https://github.com/Hamlib/Hamlib/issues/587
 2021-03-06 09:22:21 -06:00
Michael Black W9MDB 2c20b0afdb After echo check to a get_freq in icom.c 
Should fix poweron for Icom rigs that still echo in standby mode
https://github.com/Hamlib/Hamlib/issues/583
 2021-03-05 07:32:01 -06:00
Michael Black W9MDB 1473793f14 Change icom echo detection to a more robust solution. 
https://github.com/Hamlib/Hamlib/issues/583
 2021-03-04 11:01:23 -06:00
Michael Black W9MDB 3ca0313fb4 Implement RETURNFUNC in icom.c 
https://github.com/Hamlib/Hamlib/issues/514
 2021-03-03 16:57:03 -06:00
Michael Black W9MDB e5964fe670 Fix IC706 for 5 byte channels 
https://github.com/Hamlib/Hamlib/issues/295
 2021-02-23 23:16:00 -06:00
Michael Black W9MDB 1e9a991a25 Add set_dsp_flt for IC7000 -- any other Icom rigs can use this? 
https://github.com/Hamlib/Hamlib/issues/521
 2021-02-17 22:52:48 -06:00
Michael Black W9MDB 660fd94962 Change all icom rigs to watts for RIG_LEVEL_RFPOWER_METER_WATTS 
Divide by 100 for old power call
 2021-02-12 16:37:17 -06:00
Michael Black W9MDB e589e078a1 Add 3 second sleep in icom powerstat to allow the rig to wake up 
https://github.com/Hamlib/Hamlib/issues/525
 2021-02-03 12:54:30 -06:00
Michael Black W9MDB cd7811f3ed Fix icom_get_mode for rigs with 1-byte mode_len 
https://github.com/Hamlib/Hamlib/issues/522
 2021-01-29 16:32:16 -06:00
Michael Black W9MDB 5a9daf5f0e Fix ic703 and ic705 RIG_LEVEL_RFPOWER_METER_WATTS to scale to 10W instead of 100W 2021-01-20 15:07:59 -06:00
Michael Black W9MDB 8024ffb937 Change icom_get_usb_echo_off to return TIMEOUT when it occurs instead of RIG_OK 
https://github.com/Hamlib/Hamlib/issues/509
 2021-01-13 12:42:03 -06:00
Michael Black W9MDB cf858bfa3c Change rig.c to return RIG_ENAVAIL instead of RIG_ENTARGET when set_vfo==NULL 
Add IC706* to rigs that don't do dsp settings
Remove dynamic detection of transceive status in icom/frame.c
https://github.com/Hamlib/Hamlib/issues/490
 2021-01-08 12:04:25 -06:00
Michael Black W9MDB 02c0854434 In icom.c init() set priv->filter to RIG_PASSBAND_NOCHANGE to fix set_mode rigs with 2-byte cmds 
https://github.com/Hamlib/Hamlib/issues/490
 2021-01-06 17:04:44 -06:00
Michael Black W9MDB 2b1bce89bf Fix icom default filter settings 
https://github.com/Hamlib/Hamlib/issues/471
 2020-12-19 14:30:31 -06:00
Michael Black W9MDB 2a0deb3415 Add RIG_LEVEL_RFPOWER_METER_WATTS 
Old level of 0-1 just doesn't work well with the varying power levels in rigs now
 2020-12-16 17:47:49 -06:00
Michael Black W9MDB 3061a5f8b2 Fix icom filter value, not ASCII!!! 
https://github.com/Hamlib/Hamlib/issues/448
 2020-12-12 12:40:04 -06:00
Michael Black W9MDB 0fa00cb14f Missed icom.h commit 
https://github.com/Hamlib/Hamlib/issues/448
 2020-12-12 12:31:32 -06:00
Michael Black W9MDB f22d4a6dbe Update icom.h version 2020-12-12 10:07:03 -06:00
Michael Black W9MDB c70d841b83 Add NOCHANGE_PASSBAND to icom...cascading effect on adding vfo elsewhere...which is needed anyways 
https://github.com/Hamlib/Hamlib/issues/448
 2020-11-29 23:32:14 -06:00
Michael Black W9MDB 20fc303686 Fix set_mode for IC-7000 
https://github.com/Hamlib/Hamlib/issues/428
 2020-11-03 15:24:06 +00:00
Michael Black W9MDB f55d50c7bc Finish IC-729 addition 
https://github.com/Hamlib/Hamlib/issues/429
 2020-10-29 22:45:57 -05:00
Michael Black W9MDB 378cbfb008 remove some cppcheck statements not needed anymore 2020-10-29 12:53:39 -05:00
Michael Black W9MDB 0443afc794 Add wait_morse command with generit wait_morse_ptt function 
This should work for any send_morse with full breakin
https://github.com/Hamlib/Hamlib/issues/422
 2020-10-18 12:34:36 -05:00
Michael Black W9MDB 28b7543de6 Add stop_morse to Icom rigs 
https://github.com/Hamlib/Hamlib/issues/240
 2020-10-16 17:26:02 -05:00
Mikael Nousiainen a77e82be4e Fix handling of Icom repeater shift and split command responses. Add tuning step definitions for IC-9700. 2020-10-14 18:19:00 +03:00
Mikael Nousiainen 23971f8e75 Fix issues with Icom extcmds definitions, some ext_tokens missing. Refactor custom level implementations to use extcmds definitions. Print out extfuncs in caps dump. 2020-09-16 18:10:35 +03:00
Michael Black W9MDB aeaa96bc3b Fix icom_get_parm to eliminate collisions 2020-09-12 21:37:10 -07:00
Michael Black W9MDB 83667f4c65 Added CMD_PARAM_TYPE values for icom rigs to distinguish the different ext cmd types 
https://github.com/Hamlib/Hamlib/issues/373
 2020-09-12 11:21:33 -05:00
Michael Black W9MDB 54c522ef99 Start of migrating Icom rigs to separate LEVEL and PARM values to avoid collisions 
https://github.com/Hamlib/Hamlib/issues/373
 2020-09-11 09:49:47 -05:00
Michael Black W9MDB 2020f29185 Remove redundant RIG_LEVEL_BRIGHT 2020-09-10 10:07:11 -05:00
Michael Black W9MDB 24fb47cbe0 Added IC-705 
Added RIG_LEVEL_BRIGHT -- IC705 has this level
Fixed range printout
https://github.com/Hamlib/Hamlib/issues/364
 2020-09-06 12:28:35 -05:00
Mike Goodey 1138feb576 Remove icom_set_rit - it doesn't (and can't) work - see README.icom 2020-09-01 14:41:45 +01:00
Michael Black W9MDB 133a8acd30 Fix icom MainA/B SubA/B VFO selection 
https://github.com/Hamlib/Hamlib/issues/348
 2020-07-20 14:42:46 +02:00
Michael Black W9MDB 4efbddd0e8 Add ability to set Icom MAIN_VFO_A/B and SUB_VFO_A/B 
https://github.com/Hamlib/Hamlib/issues/348
 2020-07-19 17:21:23 -05:00
Michael Black W9MDB ba72dc74b2 Upgrade some rigs to STABLE 2020-07-16 11:06:39 -05:00
Michael Black W9MDB 8fd58e211d Rigs will only power up once if needed 
https://github.com/Hamlib/Hamlib/issues/297
 2020-06-14 17:14:24 -05:00
Michael Black W9MDB 71b867e141 Add some debug to icom.c 2020-06-14 09:43:42 -05:00
Michael Black W9MDB c5388b9f37 In icom.c remove priv->curr_vfo and change to rig->state.current_vfo 
https://github.com/Hamlib/Hamlib/issues/299
 2020-06-13 15:53:37 -05:00
Michael Black W9MDB 723f3f0773 Add some more rig cases for MainA/B and Sub A/B priv setting in icom_get_freq 
Add VFO_CURR as a valid VFO
https://github.com/Hamlib/Hamlib/issues/299
 2020-06-13 07:51:35 -05:00
Michael Black W9MDB 7cdaa0efd1 Change icom.c VFO_TX VFO_RX adjustment to use vfo_fixup function 
vfo_fixup should be able to handle all rigs variations
https://github.com/Hamlib/Hamlib/issues/299
 2020-06-12 07:57:13 -05:00
Michael Black W9MDB b910fa0c58 When get_split_freq_mode is called with RIG_VFO_CURR and split is not enabled 
we will assume the TX vfo is VFOB or Sub as appropriate
This hopefully makes WSJT-X happy with Icom rigs now.
https://github.com/Hamlib/Hamlib/issues/288
 2020-06-11 08:15:52 -05:00
Michael Black W9MDB 876c7bd59f Fix RIG_VFO_TX clause in icom.c 2020-06-10 08:10:35 -05:00
Michael Black W9MDB ee8dde16ea When rig_set_split_freq_mode is called and RIG_VFO_CURR is requested use default tx_vfo 
https://github.com/Hamlib/Hamlib/issues/288
 2020-06-09 12:16:45 -05:00
Michael Black W9MDB c5732d542e Fix icom.c so most all satmode requests are restricted to rigs with RIG_FUNC_SATMODE 
https://github.com/Hamlib/Hamlib/issues/288
 2020-06-08 23:04:04 -05:00
Michael Black W9MDB 3ec286ae1b Update icom.h version 2020-06-05 22:46:17 -05:00
Michael Black W9MDB d9d1074f24 Fix IC-910 behavior with gpredict 
Now allows switching between full duplex, split, and non-split mode
https://github.com/Hamlib/Hamlib/issues/237
 2020-06-04 10:37:20 -05:00
Michael Black W9MDB a8e5a66ffd Add FT_DX101D as another rig that can't get freq during PTT 
https://github.com/Hamlib/Hamlib/issues/279
 2020-06-03 16:58:42 -05:00
Michael Black 00031994c6 Remove block setting VFO_A -- does not work with rigs that don't have 
VFO_A
https://github.com/Hamlib/Hamlib/issues/274
 2020-06-01 17:38:03 -05:00
Michael Black W9MDB 281022447c Update some more items in icom.c where appropriate 2020-05-25 09:11:32 -05:00
Michael Black W9MDB 1add89bd71 Add rules for setting VFO_RX and VFO_TX for different rig types 
https://github.com/Hamlib/Hamlib/issues/261
 2020-05-24 23:42:35 -05:00
Michael Black W9MDB 9c902dd03b IC-9700 in satmode requesting "S 1 Sub" will now return RIG_OK without 
taking any action
Since satmode is Sub split anyways this makes sense
https://github.com/Hamlib/Hamlib/issues/254
 2020-05-20 06:42:06 +02:00
Michael Black W9MDB 2e3678d1a7 Fix main/sub frequency saved values 2020-05-17 17:27:28 -05:00
Michael Black W9MDB 906a369e00 Change icom behavior for IC-9700 type rig with Main/A/B && Sub A/B setup 
If Sub is asked for but neither split nor satmode is on it will get changed
to VFOB instead which should avoid doing a VFO swap
https://github.com/Hamlib/Hamlib/issues/250
 2020-05-16 07:55:59 -05:00
Michael Black W9MDB 156db580f8 IC-910 (and hopefully IC-9700) now working with gpredict in both simplex non-satmode and full duplex satmode 
As of 20200514 switching to satmode will automically switch rig to satmode
But switching back to simple requires manually going back to split mode until gpredict provide the correct split mode request of "S 1 VFOB" or "S 1 VFOA"
https://github.com/Hamlib/Hamlib/issues/237
 2020-05-14 12:15:37 -04:00
Michael Black W9MDB 366c60020b Fix merge in icom.h 2020-05-11 22:44:33 -05:00
Michael Black W9MDB 74cdd96eda Fix merge of icom.c 2020-05-11 18:05:11 -05:00
Michael Black W9MDB 3b2225e489 Fix IC-910 split mode operation with gpredict 
https://github.com/Hamlib/Hamlib/issues/237
 2020-05-11 19:00:52 -04:00
Michael Black W9MDB 0ffddf779d Change icom.c set_freq to detect error on bad freq set and swap VFOs back and not update anything 
Add some more debug
https://github.com/Hamlib/Hamlib/issues/237
 2020-05-10 07:40:06 -05:00
mdblack98 a3b1b055b3 Fix cppcheck warnings 2020-05-05 11:32:09 -05:00
mdblack98 2991d43e26 If icom.c rig_get_freq is called and VFO is None then VFO gets set to the requexted VFO 
https://github.com/Hamlib/Hamlib/issues/231
 2020-05-01 10:35:16 -05:00
mdblack98 acc468fcfd Fix channel reading for civ_731 icom rigs 
I assume this is true on all such rigs that they return 5 bytes
Writing and reading a channel should confirm it by returning the correct freq
https://github.com/Hamlib/Hamlib/issues/217
 2020-04-26 08:45:16 -05:00
mdblack98 7a075ae9fd https://github.com/Hamlib/Hamlib/issues/222 
Fix order of calls in icom_get_split_vfos
Need to set split before getting vfos
 2020-04-23 22:50:34 -05:00
mdblack98 a9a604758d https://github.com/Hamlib/Hamlib/issues/222 
Fix icom_get_split_vfo filling in rx_vfo and tx_vfo
icom_get_split_vfo: vfo=currVFO rx_vfo=None tx_vfo=None split=0
 2020-04-23 15:35:29 -05:00
Michael Black b040803765 Standard all version numbers to YYYYMMDD.N where n is intended for multiple versions in one day. 
So typically .N will be .0
 2020-03-29 23:03:21 -05:00
Michael Black e2ea0b77ac Bump icom version 2020-03-16 11:18:20 -05:00
Michael Black a858f05b03 Add x1cx03cmdfails to icom.h 2020-03-15 09:47:20 -05:00
Michael Black 1e658578ec Reset x25cmdfails when SATMODE is called 2020-03-14 15:21:56 -05:00
Michael Black 39baeecd68 Add x25cmdfails to icom.h priv 2020-03-14 14:48:26 -05:00
Michael Black 42871be196 Added some places to set default vfo when vfo has not been set yet. We're avoiding setting the default VFO on startup but allowing for clients which don't set the vfo properly. 
Commented out icom_get_freq_range as can't have this on every rig_open call...too busy for rigctld
 2020-03-12 10:12:59 -05:00
Michael Black 7a174df5b7 Bump icom.h version 2020-03-09 09:15:21 -05:00
Michael Black 16fed06ba1 Adding dynamic freq_range for Icoms stage2 2020-03-08 23:18:33 -05:00
Michael Black c21fdf3747 Beginning implementation of dynamic detection of freq_range for Icom rigs 2020-03-08 09:23:11 -05:00
Michael Black 1e2a08f65b Bump icom.h version 2020-03-06 22:19:22 -06:00
Michael Black d856248178 Add RIG_MODEL macro and change all rigs to support it 2020-03-05 08:44:18 -06:00
Michael Black 7609efbe5a Fix cppcheck warnings in icom.c 2020-03-01 23:01:24 -06:00
Michael Black 539df1624d Trying to get IC9700 split working with WSJTX 
Changed get_split_vfos to recognize priv->split_on
 2020-02-28 17:02:12 -06:00
Michael Black 1550a04716 IC-9700 (and any other dual VFO Icom rig) now works with gpredict 
Added some future priv items for possible better i/o with the rig handling frequency changes
 2020-02-23 07:50:41 -06:00
Michael Black 4f55246256 Bump version# in icom.h 2020-02-21 09:59:43 -06:00
Michael Black 4c41f8cb04 Fixing icom Main/Sub problem where some software asks for Main/Sub 
and the rig does not have Main/Sub.  Now maps Main/Sub to A/B.
May be more places these needs to be done.
 2020-02-21 09:46:00 -06:00
Michael Black af039f684e Trying to fix set_split_freq for ic9700 satmode 2020-02-19 23:24:28 -06:00
Michael Black d7f7e551b4 Bump icom.h version 2020-02-18 23:12:42 -06:00
Michael Black e315f5e3ac Added skeleton for new get_ant function that will return ant_tx and ant_rx if known 
Every rig will need to be reviewed to fill these in as appropriate
 2020-02-18 23:10:14 -06:00
Michael Black 1371e200e1 Add RIG_VFO_CURR to icom_set_split_vfo 2020-02-16 23:11:22 -06:00
Michael Black 8c11893a21 Fix icom_set_split_freq to allow for RIG_VFO_CURR request 2020-02-15 23:20:31 -06:00
Michael Black 2d6b5fabd0 Update icom version number 2020-02-13 23:20:28 -06:00
Malcolm Herring e3cef196f7 add g/set_ext_func to API 2020-02-11 09:48:13 +00:00
Michael Black fdef21f068
Merge pull request #193 from mdblack98/master 
2020-02-05 Patches
 2020-02-05 23:24:48 -06:00
Dawid Szymanski c6e06bfb01 ICOM Voice Keyer implemented. 2020-02-06 01:00:34 +01:00
Michael Black 864fe6f5c1 Update icom priv_data entries to standardize them 2020-02-03 23:33:49 -06:00
Michael Black 7e8938ae65 Changed y command to now use mandatory antenna argument 
Put a looplimit on icom_get_ant_count trying to get autodetect to work
Changes to icom_get_ant_count to try and get this working
Added dummy antenna # args to rigs that don't care i.e. only have 1 antenna
 2020-02-02 08:38:10 -06:00
Michael Black fd965de5c9
Add ant_count to icom.h 2020-01-31 09:35:57 -06:00
Michael Black 203c94fa4a
Fix get_ant/set_ant commands to work with 1 or 2 byte responses in icom rigs 2020-01-27 17:33:01 -06:00
Michael Black d853c36fb3
Change get_ant to add another option for icom rigs (and others if needed) 2020-01-21 17:53:12 -06:00
Malcolm Herring 9bff33896e new directory structure 2020-01-18 15:31:23 +00:00