mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
9 902 Commity
53 Gałęzie
28 Tagi
30 MiB
Wykres commitów

313 Commity (dad55ef1481cb82a93bac73d7d5793b7bfe4cdf5)

Autor SHA1 Wiadomość Data
Mike Black W9MDB dad55ef148 astyle files getting ready for WSJT-x-2.7.0rc1 2023-05-08 07:37:13 -05:00
Mikael Nousiainen 1a59ce2ae2 Fix and extend TS-590(S/SG) backend 2023-04-15 00:25:29 +03:00
Nick Craig-Wood 2c283ab47a Fix QRP Labs QCX Morse Sending 
Before this fix, hamlib used the TS480 protocol for sending morse
which adds a lot of spaces on the end.

The QCX actually uses the Elecraft morse sending protocol so switch it
over to using that.

Tested with QCX Mini firmware v1.09a
 2023-04-09 14:00:25 +01:00
Daniele Forsi IU5HKX 2db37fe7db Fix typos 2023-03-26 11:01:51 +02:00
Mike Black W9MDB 113cad3ee1 For K3 prevent ID; command from K22; command 
Remote ops was having a problem with K22;
https://github.com/Hamlib/Hamlib/issues/1254
 2023-03-18 23:40:45 -05:00
Mike Black W9MDB fd473062d1 astyle kenwood.c 2023-03-18 15:21:30 -05:00
Mikael Nousiainen ec0645780c Fix Kenwood TS-2000 bugs and implement essential commands for remote control 2023-03-07 10:38:20 +02:00
George Baltz N3GB 07fc69f3e8 Enable first user of check_level_param 
Use check_level_param for all RIG_LEVEL_CWPITCH sets for Kenwood rigs.
Note that the placement of the call is temporary; eventually it should
be moved outside the main switch statement, and invoked for all set_levels.
 2023-02-26 13:12:52 -05:00
Mike Black W9MDB a9cb121584 Add stop_morse for some Kenwood rigs 2023-02-25 22:11:11 -06:00
Mike Black W9MDB 717dae5027 Fix potential segfault in cmdstr check in kenwood.c 2023-02-21 11:44:12 -06:00
Mike Black W9MDB 514d87dcc9 astyle kenwood.c 2023-02-19 17:01:42 -06:00
Mike Black W9MDB 10ac497c0b Improve response of ;;;;PS1; command 2023-02-19 16:56:51 -06:00
Daniele Forsi IU5HKX 420125b8bc [kenwood] Fix includes 2023-02-16 19:08:24 +01:00
Daniele Forsi IU5HKX 5c17054295 [kenwood] Remove unused include of config.h 2023-02-14 19:29:22 +01:00
Mike Black W9MDB f9adf5de0a Add attenuator level control for TS890 
Update SMeter/SWR tables for TS890
Thanks to N3GB George Baltz
 2023-02-08 12:02:19 -06:00
Mike Black W9MDB 73fc563ceb Add fix for TMD700 
https://github.com/Hamlib/Hamlib/issues/1230
 2023-02-06 15:58:18 -06:00
Mike Black W9MDB 0e9bdc5d04 Fix spelling error in kenwood.c 2023-02-04 17:08:31 -06:00
Mike Black W9MDB d645bae207 Ensure K4 is in K40 mode when requesting ID 2023-02-01 16:50:10 -06:00
Mike Black W9MDB 1e353191bc Make Kenwood rigs wake up serial port on PS command 
Failing get_powerstat will now return RIG_OK
https://github.com/Hamlib/Hamlib/issues/1226
 2023-01-26 08:35:45 -06:00
Mike Black W9MDB eb049ab92d Add dummy bytes to kenwood PS; command 
https://github.com/Hamlib/Hamlib/issues/1226
 2023-01-25 22:18:45 -06:00
Mike Black W9MDB 52bed765ef Clean up rig power on/off sequencing for Kenwood/Elecraft rigs 
Note that the K3/K3S cannot power on via CAT control
https://github.com/Hamlib/Hamlib/issues/1225
 2023-01-22 23:41:21 -06:00
Mike Black W9MDB 9626894029 Fix K3/K3S VFOB mode/bandwidth setting 
https://github.com/Hamlib/Hamlib/issues/1224
 2023-01-22 16:45:22 -06:00
Mike Black W9MDB c3ff7e134f Add TS-2000 to has_ps exceptions 
https://github.com/Hamlib/Hamlib/issues/1213
 2023-01-15 12:41:01 -06:00
Mike Black W9MDB d2ef9d5eda Fix get_powerstat status return to always show POWER_ON for kenwood non-PS rigs 
https://github.com/Hamlib/Hamlib/issues/1213
 2023-01-09 10:28:43 -06:00
Mike Black W9MDB 64c566cd14 Add QRPLabs QCX/QDX for better behavior/capability from ts480 entry 2022-12-30 16:04:39 -06:00
Mike Black W9MDB e2570d9d49 Fix misc TS890S items -- thanks to George Baltz N3GB 2022-11-28 16:45:08 -06:00
Mike Black W9MDB 5d7f695727 Add AGC levels to Kenwood rigs that we can verify have them 
https://github.com/Hamlib/Hamlib/milestone/16
 2022-11-24 10:51:34 -06:00
Mike Black W9MDB 0bacb35f06 Make kenwood a bit more robust to discern between no reply and corrupted/unexpected reply 
This logic should be usable to use AI mode eventually or share serial splitter line
 2022-11-18 15:53:34 -06:00
Mike Black W9MDB 6c5e0e6974 Update astyle formatting 2022-11-16 15:30:36 -06:00
Mike Black W9MDB b674317791 Fix kenwood PS command length 2022-10-21 13:26:13 -05:00
Mike Black W9MDB 8adfd5e351 Update some debug and fix length of PS command in kenwood.c 2022-10-10 22:15:06 -05:00
Mike Black W9MDB 67b933ddb5 Update astyle for 4.5 release 2022-09-20 08:46:28 -05:00
Mike Black W9MDB 9b98ea11eb Make debug rx_vfo info match code better in kenwood.c 
https://github.com/Hamlib/Hamlib/issues/1116
 2022-09-17 10:24:13 -05:00
Mike Black W9MDB 7db23d549f Add another priv->has_ps check to kenwood.c 2022-09-13 22:15:22 -05:00
Mike Black W9MDB 8c4c906efe Add a few more rigs to have_ps=0 2022-09-13 16:22:03 -05:00
Mike Black W9MDB e7262e23c8 Make TS450S turn off has_ps 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 11:45:58 -05:00
Mike Black W9MDB f58ca95c9c TS-450S/690S does not have PS cmd so we will disable have_ps when 1st call to PS times out for Kenwood rigs 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 09:26:04 -05:00
Mike Black W9MDB 1aed27c71a Remove #defines for rig_set_split and return to standard call 2022-08-27 07:36:14 -05:00
Mike Black W9MDB c34f719337 Astyle files 2022-08-20 22:56:04 -05:00
Nick Craig-Wood M5NCW a81c295b3c Fix sending morse with QRPLabs QCX rigs 
The QCX series emulates the Kenwood TS480. However for the sending
morse command it seems to be more in line with the Elecraft K series
rigs.

Before this change, the QCX mini would reply to the KY command with
KY2 which was not understood. The QCX mini defines the KY responses to
be:

- KY0; if message sending is in progress and the transmit text buffer is not more than 75% full
- KY1; if message sending is in progress and the transmit text buffer is more than 75% full
- KY2; if no message is being sent, therefore the transmit text buffer is emtpy

This seems to be an extension of the original Kenwood protocol but it
is exactly as implemented by Elecraft in their K series rigs.

This patch treats the KY2 response the same as the KY0 response
meaning - OK to transmit.
 2022-08-03 18:31:03 +01:00
Mike Black W9MDB a83eb3bf42 astyle files for 4.5 release 2022-07-27 17:16:17 -05:00
Mike Black W9MDB 627ec83652 Change malloc to calloc 2022-07-27 10:26:08 -05:00
Mike Black W9MDB 21e6e9bf2a Fix X command turning of split mode 
https://github.com/Hamlib/Hamlib/issues/1083
 2022-07-26 10:00:36 -05:00
Mike Black W9MDB 4627e7c4fb Update kenwood rig->state.tx_vfo in kenwood_get_split_vfo_if 
https://github.com/Hamlib/Hamlib/issues/1083
 2022-07-19 13:25:28 -05:00
Daniele Forsi IU5HKX 08c06aea14 Fix spelling errors 
Fixed with:
codespell --summary --skip=.git,extra,,lib,macros,security --ignore-words-list="ans,ba,cant,develope,fo,get's,nin,numer,parm,parms,setts,som,statics,ths,ue,vektor,objext" --write-changes --interactive=2
and manual editing.
 2022-07-07 23:56:22 +02:00
Mike Black W9MDB fc6e432143 Fix kenwood split status 
https://github.com/Hamlib/Hamlib/issues/1072
 2022-07-05 17:03:21 -05:00
Mike Black W9MDB 5e6c1eaef8 Rename TRACE to HAMLIB_TRACE to avoid conflict with MSVC 2022-07-04 07:26:30 -05:00
Mikael Nousiainen d3659ef996 Use the correct max RX lengths for min/max reads for Kenwood to avoid timeouts 2022-06-21 21:10:24 +03:00
Mike Black W9MDB 5e9bfed4ce Malachite fix to return good freq for VFOA and zero just for VFOB -- duh 
https://github.com/Hamlib/Hamlib/issues/1070
 2022-06-19 12:27:56 -05:00
Mike Black W9MDB fdbdb388e2 Fix Malachite SDR to return 0 freq when VFOB is requested -- rig does not have VFOB 
https://github.com/Hamlib/Hamlib/issues/1070
 2022-06-19 12:03:32 -05:00