Mike Black W9MDB
fc6e432143
Fix kenwood split status
...
https://github.com/Hamlib/Hamlib/issues/1072
2022-07-05 17:03:21 -05:00
Mike Black W9MDB
fdbdb388e2
Fix Malachite SDR to return 0 freq when VFOB is requested -- rig does not have VFOB
...
https://github.com/Hamlib/Hamlib/issues/1070
2022-06-19 12:03:32 -05:00
Mike Black W9MDB
a468f0dee8
Allow Kenwood AI command for FA/FB async operation
...
https://github.com/Hamlib/Hamlib/issues/1049
2022-06-02 23:21:51 -05:00
Mike Black W9MDB
c76dc1453d
Forgot to commit kenwood.h
2022-04-27 10:14:27 -05:00
Mike Black W9MDB
56866fecd5
Allow kenwood rigs to retry all commands using ID; verfication method
...
The actual cmd was only being sent once during the retry loop
https://github.com/Hamlib/Hamlib/issues/983
2022-03-12 08:12:45 -06:00
Mike Black W9MDB
76805ae60c
Balance ENTER/RETURNFUNC in kenwood.c
2022-02-13 10:24:55 -06:00
Mike Black W9MDB
982f88035c
Allow FV command to fail for TS-590S and default firmwave rev to 1.0
2022-02-11 12:14:19 -06:00
Mike Black W9MDB
7e1e90352e
Add VFO_TX to kenwood.c set_vfo
2022-02-06 09:28:56 -06:00
Mike Black W9MDB
3a77601ca5
Check for VFO_TX and VFO_RX in kenwood_set_split_vfo
2022-02-04 06:55:28 -06:00
Mike Black W9MDB
836fae0ba0
Add VFO_TX handling (VFOB) to kenwood_set_split_vfo
2022-02-03 23:13:27 -06:00
Mike Black W9MDB
be992b8a36
Fix kenwood_get_split_vfo_if(1583): unknown rxVFO=None
2022-01-21 22:57:57 -06:00
Mike Black W9MDB
2d85464688
Allow Kenwood FW command to return a custom filter setting
2022-01-19 12:39:05 -06:00
Mike Black W9MDB
b577f3bd51
Set rx_vfo in kenwood.c to default when not already set
...
https://github.com/Hamlib/Hamlib/issues/931
2022-01-17 14:59:16 -06:00
Mike Black W9MDB
5b942259ac
Added TM-V71(A)
...
https://github.com/Hamlib/Hamlib/issues/915
2022-01-03 08:24:49 -06:00
Mike Black W9MDB
7c7d04dc84
Add Lab599 TX-500
2021-12-29 17:50:51 -06:00
Mike Black W9MDB
eaa6d1bc28
Remove redunant break statements in kenwood.c
2021-11-28 16:41:00 -06:00
Mike Black W9MDB
8928672e2c
Rigs with non-targetable set_mode will now use cached values to determine if mode needs to be changed
...
Hamlib 5.0 plans are to start using transceive mode and AI2 mode to detect rig changes so eventually
users on these types of rigs will be able to twiddle knobs and hamlib will follow.
But for now we are avoiding the VFO flashing and relay chattering on non-targetable rigs
https://github.com/Hamlib/Hamlib/issues/872
2021-11-24 09:03:26 -06:00
Mike Black W9MDB
70a7db3318
Extract current vfo for kenwood split setting to ensure datamode gets set on correct VFO
...
https://github.com/Hamlib/Hamlib/issues/872
2021-11-23 09:53:56 -06:00
Mike Black W9MDB
ccac553f1b
Add Main/Sub support to kenwood data mode determination
...
Improve simkenwood
https://github.com/Hamlib/Hamlib/issues/872
2021-11-23 08:33:57 -06:00
Mike Black W9MDB
e283e2b039
Make kenwood set_split more robust to possible reverse split
2021-11-22 16:56:54 -06:00
Mike Black W9MDB
489ecf6aed
kenwood.c change to minimize mode setting if change not needed
...
https://github.com/Hamlib/Hamlib/issues/872
2021-11-18 09:21:09 -06:00
Mike Black W9MDB
d6541eba0a
https://github.com/Hamlib/Hamlib/issues/863
2021-11-09 11:59:15 -06:00
Mike Black W9MDB
de1b0f5126
Fix kenwood unsupported VFO error for currVFO
...
https://github.com/Hamlib/Hamlib/issues/849
2021-11-02 09:34:47 -05:00
Mike Black W9MDB
0309a34d02
Change kenwood.c to not do a set_vfo if current_vfo already is set
...
https://github.com/Hamlib/Hamlib/issues/844
2021-10-28 16:42:07 -05:00
Mike Black W9MDB
022d4e4f67
Change Elecraft to remove AB3 command as it took 650ms to execute.
...
We now just set VFOB freq to VFOA freq when setting split mode
https://github.com/Hamlib/Hamlib/issues/842
2021-10-27 23:21:28 -05:00
Mike Black W9MDB
0e3393a1e0
Add copy VFOA>B for Elecraft K3, KX2, and KX3 when split mode is requested to ensure we avoid cross band error
...
https://github.com/Hamlib/Hamlib/issues/839
2021-10-23 15:53:01 -05:00
Mike Black W9MDB
6553373ad1
Fix kenwood_get_mode for Elecraft K4 to use MD$ to get mode
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-20 16:21:43 -05:00
Mike Black W9MDB
dc09191f07
Add copy A/B for Elecraft K4 to avoid cross-band error when setting split
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-18 15:33:50 -05:00
Mike Black W9MDB
891ca6ed75
Fix TS450 and TS690 split check -- should be using IF status now
...
Should work with any rigs that don't have split status too in case there are any.
https://github.com/Hamlib/Hamlib/issues/826
2021-10-15 12:02:41 -05:00
Mike Black W9MDB
2319d17389
Fix rigs so that VFOB/A split works as well as VFOA/B
...
https://github.com/Hamlib/Hamlib/issues/745
2021-10-08 23:55:48 -05:00
Mike Black W9MDB
0f2a92b2de
Change kenwood to only set VFOA default on 1st rig_open call
...
https://github.com/Hamlib/Hamlib/issues/797
2021-09-13 13:13:12 -05:00
Mike Black W9MDB
f6b57e147d
Make kenwood set_split_vfo behave the same as set_vfo in both directions
...
https://github.com/Hamlib/Hamlib/issues/746
2021-08-29 08:29:26 -05:00
Mike Black W9MDB
2c8092d21b
For kenwood rigs reset split after set_vfo FR command if needed
...
Side effect of this change is support of reverse split by changing to VFOB
https://github.com/Hamlib/Hamlib/issues/746
2021-08-28 22:35:16 -05:00
Mike Black W9MDB
fe8c02bba0
Add RX command to kenwood rigs hopefully setting VFO to VFOA after split set
...
FT450 and others turn split off doing FR0 and FT1; leaves the rig on VFOB
https://github.com/Hamlib/Hamlib/issues/746
2021-08-27 13:08:15 -05:00
Mike Black W9MDB
aa9b9196b4
Fix Kenwood FR/FT sequencing
...
https://github.com/Hamlib/Hamlib/issues/746
2021-08-26 16:31:37 -05:00
Mike Black W9MDB
0965a4382c
Fix Kenwood rigs that turn split off during FR command by turning split back on if needed
...
https://github.com/Hamlib/Hamlib/issues/746
2021-08-22 16:47:29 -05:00
Mike Black W9MDB
3baa9da839
Add a 2nd try on kenwood.c ID command -- TS450S was failing on 1st try
2021-08-09 16:23:17 -05:00
Mike Black W9MDB
f8da39243d
Default Kenwood rigs to VFOA and split=off
...
https://github.com/Hamlib/Hamlib/issues/745
2021-08-04 09:38:15 -05:00
Mike Black W9MDB
a8200886bf
Ensure kenwood rigs stay in split mode after FR0; command
...
https://github.com/Hamlib/Hamlib/issues/746
2021-07-19 23:49:48 -05:00
Mike Black W9MDB
fe2c0e7723
Update kenwood.h version
2021-07-18 16:19:42 -05:00
Mike Black W9MDB
e966508b3a
For all kenwoods query split and don't change if not needed
...
https://github.com/Hamlib/Hamlib/issues/744
2021-07-17 17:02:42 -05:00
Mike Black W9MDB
3b2715463d
Change kenwood_set_mode to only change mode if necessary by reading it first
...
https://github.com/Hamlib/Hamlib/issues/726
2021-06-15 22:35:05 -05:00
Mike Black W9MDB
386b08dc4f
Add ctcss_list and dcs_list to rigctld so rigcctld caps reflects the connected rig
...
https://github.com/Hamlib/Hamlib/issues/659
2021-04-29 10:49:29 -05:00
Mike Black W9MDB
a6af56ff53
Fit kenwoods set_rit to move right right direction
...
https://github.com/Hamlib/Hamlib/issues/677
2021-04-27 07:34:14 -05:00
Mike Black W9MDB
7ea0a49dcd
Re-do get_rit for has_rit2 rigs
...
If this works should be able to change get_rit in TS480 to the generic kenwood get_rit
https://github.com/Hamlib/Hamlib/issues/677
2021-04-25 23:20:34 -05:00
Mikael Nousiainen
6fd5371b12
Merge branch 'master' into ts480-fixes
2021-04-25 16:50:48 +03:00
Mikael Nousiainen
08a7515e91
Add support for FW filter width command on TS-480
2021-04-24 19:13:12 +03:00
Mike Black W9MDB
0a4e0dbdfb
Fix RIT in kenwood.c -- default to 10Hz steps if rig step setting works
...
https://github.com/Hamlib/Hamlib/issues/677
2021-04-23 23:38:49 -05:00
Mikael Nousiainen
e4657a5d16
TS-480: Add Digital Noise Limiter. Start implementation for filter width command. Fix bugs.
2021-04-23 23:32:42 +03:00
Mikael Nousiainen
de5c5a27a1
Add support for TS-480 slope filter settings and some useful custom funcs/levels. Fix TS-480 bugs.
2021-04-23 10:42:43 +03:00