mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
6 575 Commity
53 Gałęzie
28 Tagi
38 MiB
Wykres commitów

376 Commity (8595c244e4cd3705212a652bfad0b2a2a49cf178)

Autor SHA1 Wiadomość Data
Michael Black W9MDB 1affac778b Change ft1200 stop bits to 2. Found by Bill Sommerville with remote serial port testing. 
Were getting many ?; responses with stopbits=1
 2021-01-16 12:14:30 -06:00
Michael Black W9MDB 50a46431b2 Make newcat_set_cmd_validate change VFOs when needed for band select 
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-16 09:31:15 -06:00
Michael Black W9MDB 4b2d63f9f0 Fix newcat_set_cmd_validate band change checking 
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-16 08:50:54 -06:00
Michael Black W9MDB 174d411897 Restrict newcat_set_cmd_validate BS to only rigs with get_vfo and set_vfo 
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-16 07:38:22 -06:00
Michael Black W9MDB f2b8096529 Fix 2nd BS call in newcat.c 
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-15 22:29:46 -06:00
Michael Black W9MDB 14493d4df5 newcat.c make band_index vfo check work for both VFOS 
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-15 17:39:37 -06:00
Michael Black W9MDB a7b9620f91 Make band_index detect change by VFO 
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-15 17:29:02 -06:00
Michael Black W9MDB 598b105e79 astyle files prepping for 4.1 release 2021-01-15 16:48:32 -06:00
Michael Black W9MDB 28c7ee7f88 Add BS command for "other" VFO for Yaesu rigs 
This should be redundant for rigs where the bandstack includes both VFOs
https://github.com/Hamlib/Hamlib/issues/510
 2021-01-15 16:36:07 -06:00
Michael Black W9MDB 1cd433b0d4 Increase newcat_set_cmd_validate retries to 8 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 14:17:35 -06:00
Michael Black W9MDB fb026f7faf Remove BS from newcat_cmd_set_validate as there is no read capability 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 12:27:04 -06:00
Michael Black W9MDB c7a5ae3e34 Fix boo boo 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 12:02:58 -06:00
Michael Black W9MDB c3ac828cdb Combine writes in newcat_set_cmd_validate to speed up timing 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 12:01:06 -06:00
Michael Black W9MDB 59df7ccc23 Fix newcat_set_cmd_validate TX command 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 11:44:50 -06:00
Michael Black W9MDB a2c4387543 Fit newcat_set_command_validate FT comparison 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 11:17:23 -06:00
Michael Black W9MDB ad2c20f611 Fix newcat_set_cmd_validate read_string check 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 10:58:47 -06:00
Michael Black W9MDB ea9a706743 Add debug for newcat_set_cmd_validate 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-15 10:56:27 -06:00
Michael Black W9MDB 517fb87b8b Fix MD command in newcat_set_cmd_validate 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-14 17:25:39 -06:00
Michael Black W9MDB 6f4ce3a787 Have EPROTO return when newcat_set_cmd_validate fails that way 
ENIMPL will fall through
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-14 16:55:12 -06:00
Michael Black W9MDB 6779d04581 Add rig_flush to newcat_set_cmd_validate 2021-01-14 16:38:31 -06:00
Michael Black W9MDB 30c2d34d87 Implemented new Yaesu retry mechanism using command validation technique 
Cmds that are implemented are verified and 5 tries are made if answer != request
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-14 16:32:55 -06:00
Michael Black W9MDB 32d5f2b49e In newcat.c give the BS command 200ms to do it's thing 
Allow BS command when in split mode
We now re-read freq/mode after BS and just return if frequency is already set correctly
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-13 15:38:20 -06:00
Michael Black W9MDB b5de94da2a Try adding an 11ms delay on set commands before the ID; is sent 
FT2000 is seeing repeated ?; responses and timing may be important
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-13 09:40:20 -06:00
Michael Black W9MDB b4627b75ba Fix newcat.c retry when read command returns ?; 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-13 08:48:48 -06:00
Michael Black a9a806f8e0
Merge pull request #507 from mikaelnousiainen/fix-yaesu-newcat-retries 
Re-enable Yaesu question mark handling and fix newcat_get_cmd retries in case of question mark response (2nd attempt)
 2021-01-12 16:22:21 -06:00
Mikael Nousiainen c46ac9b474 Get MICGAIN is also rejected in RTTY modes by certain Yaesu newcat rigs 2021-01-13 00:10:52 +02:00
Mikael Nousiainen 49128645b1 Set comp is also rejected in AM/FM/RTTY modes by certain Yaesu newcat rigs 2021-01-13 00:04:10 +02:00
Mikael Nousiainen 7be0af0362 IF shift is rejected also in AM mode 2021-01-13 00:01:10 +02:00
Mikael Nousiainen 5e00a54ca0 Get mode command was conflicting with other commands 2021-01-12 23:57:49 +02:00
Mikael Nousiainen 23e94a5375 Make skipping of retries for certain Yaesu newcat commands rig and mode-specific 2021-01-12 23:42:49 +02:00
Mikael Nousiainen 3af9f06fa5 All Yaesu newcat rigs use the same format for turning CTCSS ON/OFF 2021-01-12 23:01:54 +02:00
Mikael Nousiainen cce1db9ee1 Fix conflicts 2021-01-12 22:18:35 +02:00
Mikael Nousiainen c1a0e15464 Fix error codes to allow retries in newcat_get_cmd 2021-01-12 22:13:11 +02:00
Michael Black W9MDB 935b520b44 Change debug message in newcat.c so we can see which one it is 
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-12 07:13:50 -06:00
Mikael Nousiainen dd4076355d Re-enable Yaesu question mark handling and fix newcat_get_cmd retries in case of question mark response 2021-01-12 11:00:18 +02:00
Michael Black W9MDB 614f08b672 Disable several question_mark_response_means_rejected lines 
They are much too general and need to be narrowed to rig/mode
https://github.com/Hamlib/Hamlib/issues/505
 2021-01-11 17:45:53 -06:00
Michael Black W9MDB 736959f41a Fix ft100.c RPT_SHIFT bit masking 
https://github.com/Hamlib/Hamlib/issues/501
 2021-01-10 14:35:37 -06:00
Michael Black W9MDB ca8ed30f8f astyle files 2021-01-09 10:13:17 -06:00
Michael Black W9MDB 19e819948f Add RIG_TARGETABLE_ANT and fix Yaesu rigs -- Yaesu are only ones needing this right now 
https://github.com/Hamlib/Hamlib/pull/495
 2021-01-08 07:16:45 -06:00
Mikael Nousiainen 9e8b7539bb Set FT-2000 retries to 3 to follow other Yaesu backends. There should be no need for 10 retries. 2021-01-08 09:13:56 +02:00
Mikael Nousiainen eefea70a24 Fix SH and AN commands on FT-2000 for VFOB as these commands are not targetable 2021-01-08 09:12:29 +02:00
N8TW cfb0e13599 Bug fix limiting memory access to 15 slots instead of 16. 2021-01-07 16:31:45 -05:00
Michael Black W9MDB 08792f9295 Change FT897 write_delay to 5ms -- MicroHam seems to need it 
https://github.com/Hamlib/Hamlib/issues/384
 2021-01-04 17:36:09 -06:00
Michael Black W9MDB d6d79de732 Another attempt to get FT2000 RFPOWER_METER correct for both 0-1 and watts readings 
https://github.com/Hamlib/Hamlib/issues/488
 2021-01-04 14:43:03 -06:00
Michael Black W9MDB f34ccfa3b8 Fix FT2000 RIG_LEVEL_RFPOWER_METER for FT2000 
astyle newcat.c
https://github.com/Hamlib/Hamlib/issues/488
 2021-01-04 12:09:28 -06:00
Michael Black W9MDB e8c3d37cdc Remove str_cal correction for FT2000 -- have to figure out a better way to do it 
https://github.com/Hamlib/Hamlib/issues/488
 2021-01-04 11:28:32 -06:00
Michael Black W9MDB 38faad95e8 Add some debug to newcat.c 2021-01-04 10:44:25 -06:00
Michael Black W9MDB 8d9f7378db Add ft100_get_dcs_code and ft100_get_rptr_shift 2021-01-03 15:27:25 -06:00
Michael Black W9MDB 1e98661ce4 Add FT-897D 
https://github.com/Hamlib/Hamlib/issues/384
 2021-01-03 13:33:15 -06:00
Michael Black W9MDB 1994abd031 Add ft100_get_ctcss_tone 2021-01-02 23:08:43 -06:00