For the K3 RIT/XIT are now explicitly turned On/Off by calling
rig_get/set_func() and passing RIG_FUNC_R/XIT and the status of 1 or 0.
When setting the RIT/XIT offset by calling rig_set_r/xit, an offset of 0
will clear the RIT/XIT offset but will no longer turn the RIT/XIT
function Off. Likewise, an offset can be set but not active until the
RIT/XIT function is explicitly turned On.
Recent firmware versions since 4.37 now offer support for higher
resolution for the S-meter output via the SMH command. The K3 backend
performs the STRENGTH level routine and passes other levels to the
Kenwood backend.
This patch has not been tested with a firmware version older than 4.39
to assure that operation with the SM command still works as expected.
Create new confparams token of 'ritclr' for clearing RIT/XIT offset
without turning off RIT/XIT function. Thanks to Tor, N4OGW, for the
request. May be replaced in the future by a dedicated RIT/XIT clear
function in the Hamlib API.
The K2 and K3 support a TQ command to query the transmit status. As
only four bytes are returned it is much faster than the longer IF
command response. Access is via rig_get_ext_level--rigctl 'l' command
with a Level mnemonic of 'txst'. Returns '0' on RX and '1' on TX.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3032 7ae35d74-ebe9-4afe-98af-79ac388436b8
Implemented kenwood_cfg_params structure to allow RIT/XIT tokens to be
available to all Kenwood backend rigs (Fine Step and Voice announce are
also defined). K2/K3 rigs can only set/get RIT/XIT.
Updated README.k2/k3 for RIT/XIT functions and prior updates.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3031 7ae35d74-ebe9-4afe-98af-79ac388436b8
Implemented rig_get_ext_level() for the K3 FI command which returns the
last four digits of the IF center frequency. This value changes as the
operator adjusts the shift control, changes mode, or adjusts the bandwidth
control. The function returns the actual frequency of 8210000 Hz plus
the value returned by the FI command.
To get this frequency value the token IFCTR must be passed to
rig_get_ext_level(). This token is specific to the K3 backend.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3029 7ae35d74-ebe9-4afe-98af-79ac388436b8
K2 backend will now scan for installed RTTY mode and filters per
mode upon rig_open(). Implemented get/set mode in K2. The get_mode()
function checks the filter bandwith and returns that for the width
value and the set_() function will select and set an appropriate
filter based on the width passed in.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3021 7ae35d74-ebe9-4afe-98af-79ac388436b8