mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
7 185 Commity
58 Gałęzie
33 Tagi
56 MiB
Wykres commitów

379 Commity (758e9bc3a7ff9e19da0954166b93683d41ab622c)

Autor SHA1 Wiadomość Data
Michael Black W9MDB 4729f2a0f2 Small change to rig_set_freq retry 2021-02-26 23:37:25 -06:00
Michael Black W9MDB bb00c35980 In rig_set_ptt allow rig_get_ptt to fail and retry 
IC-9700 seems unable to query ptt right after setting it
https://github.com/Hamlib/Hamlib/issues/571
 2021-02-26 11:35:53 -06:00
Michael Black W9MDB 84e4a6a88c Fix compilation warnings in rig.c 2021-02-26 11:07:32 -06:00
Michael Black W9MDB 7eb50d0d97 Add verification of set_ptt with get_ptt 2021-02-24 22:39:45 -06:00
Michael Black W9MDB e64c1e8eb7 Add freq check in rig_set_split_freq_mode to ensure requested freq is actually set 
https://github.com/Hamlib/Hamlib/issues/558
 2021-02-23 07:44:16 -06:00
Michael Black W9MDB c83eb29e25 Add retry in rig_set_split_freq to ensure freq is actually changed 
https://github.com/Hamlib/Hamlib/issues/558
 2021-02-21 16:44:28 -06:00
Michael Black W9MDB f4748ebf8a Change rig.c to query freq after set freq to ensure it gets set 
Up to 4 retries
https://github.com/Hamlib/Hamlib/issues/549
 2021-02-16 15:58:12 -06:00
Michael Black W9MDB b35191d6ad Fix extra LF in rigerror output 
ENTERFUNC/RETURNFUNC in dummy.c
https://github.com/Hamlib/Hamlib/issues/514
 2021-02-10 22:58:45 -06:00
Michael Black W9MDB 6ffbf168d0 Add get_vfo_list command so rigctl can see available vfos 
Should allow Log4OM to query VFOB/Sub freq now
Another fix to argumenet prompting with rigctl/rigctld
Add 2nd line of return for rigerror -- we well gradually be improving error info
https://github.com/Hamlib/Hamlib/issues/530
 2021-02-10 17:32:59 -06:00
Michael Black W9MDB 02fffca989 Update currVFO cache freq before figuring out the real vfo in rig.c 2021-02-10 12:44:00 -06:00
Michael Black W9MDB 5b59868191 Add resetting of all VFO caches via set_cache_freq using RIG_VFO_ALL 
https://github.com/Hamlib/Hamlib/issues/539
 2021-02-09 15:41:33 -06:00
Michael Black W9MDB a23a3b4882 Add a little debug to rig.c 
https://github.com/Hamlib/Hamlib/issues/539
 2021-02-08 17:36:48 -06:00
Michael Black W9MDB 2bb74f77d2 Fix debug msg formatting in rig.c 2021-02-08 17:31:43 -06:00
Michael Black W9MDB 54aca79671 Change ptt check in newcat.c set_freq to check ptt only for affected rigs 
https://github.com/Hamlib/Hamlib/issues/540
 2021-02-08 16:29:04 -06:00
Michael Black W9MDB ad9d464822 Remove MainC from caching due to effect on rig_caps structure offsets 
https://github.com/Hamlib/Hamlib/issues/537
 2021-02-08 12:54:33 -06:00
Michael Black W9MDB b05a1638a8 Add caching of MEM and MAINC vfos 2021-02-07 15:03:43 -06:00
Michael Black W9MDB e0e743ee90 Update rig.c docs 2021-02-07 14:58:33 -06:00
Michael Black W9MDB 418e963c86 Add \get_vfo_info to rigctl and rigctld to allow geting freq/mode/width by vfo in one call 
Overcomes limitation of f command where vfo swapping is needed if not in --vfo mode
rig_get_vfo_info function added
Log4OM should be able to get VFOB frequency on most rigs
https://github.com/Hamlib/Hamlib/issues/530
 2021-02-07 12:45:59 -06:00
Michael Black W9MDB 96e2cc7829 Fix extra LF in debug messages 2021-02-03 09:59:14 -06:00
root 228cc10aeb Fix compile warnings with -O2 flag 2021-02-03 06:13:12 +01:00
Michael Black W9MDB 84ce231daf Fix link error for debugmsgsave on MacOS and perhaps others 2021-01-31 07:08:08 -06:00
Michael Black W9MDB 431b5dfc37 Make lack of tx_range_list non-fatal -- some rigs don't have this 2021-01-29 08:30:35 -06:00
c vw f38f35beeb corrected bug 2021-01-29 09:50:11 +01:00
Michael Black W9MDB 2be172ac4e Improve robustness of rigctld 
Now retries opening indefinitely
Improved client side too
Error message should now show timeout if rig disappears
 2021-01-24 10:51:19 -06:00
Michael Black W9MDB 85205abd45 Keep debug msg for rig_check_rig_caps on all the time for now 2021-01-22 07:52:15 -06:00
Michael Black W9MDB 0058cffcc7 Add rig_check_rig_caps to check that shared library compatibility is good 
Returns -RIG_EINTERNAL if bad, RIG_OK if good
Prints out WARN level message if bad
 2021-01-21 17:18:45 -06:00
Michael Black W9MDB 1e96b1f4d7 Remove get_freq -- seems to be causing a problem with FLRig 2021-01-19 12:12:24 -06:00
Michael Black W9MDB bc607bfc1d Add rig_get_freq to rig_open to set up internal status correctly 2021-01-19 06:30:00 -06:00
Michael Black W9MDB 2654503779 small improvement on caching check logic 2021-01-18 08:48:10 -06:00
Michael Black W9MDB 60279707e2 Fix VFOB caching 2021-01-18 08:28:20 -06:00
Michael Black W9MDB 5cd82c4026 Change print format on a few freq items 2021-01-17 22:24:39 -06:00
Michael Black W9MDB b1b6a0a771 Fix range_list check in src.c 2021-01-17 11:59:26 -06:00
Michael Black W9MDB 544777f935 Fixed ENTER func error 2021-01-17 07:32:42 -06:00
Michael Black W9MDB c5c60f0f43 First phase of improving debug messages 2021-01-17 07:25:28 -06:00
Michael Black W9MDB 598b105e79 astyle files prepping for 4.1 release 2021-01-15 16:48:32 -06:00
Michael Black W9MDB 612de9762e Fix intialization of rx_range_list 
https://github.com/Hamlib/Hamlib/issues/504
 2021-01-11 14:53:35 -06:00
Michael Black W9MDB 6e8b90aeec Fix cppcheck warnings 2021-01-09 15:19:19 -06:00
Michael Black W9MDB ca8ed30f8f astyle files 2021-01-09 10:13:17 -06:00
Michael Black W9MDB 1d74711a00 Fix filling of range_list which affects vfo_list 
See also
https://github.com/Hamlib/Hamlib/issues/498
https://github.com/Hamlib/Hamlib/issues/490
 2021-01-08 17:49:56 -06:00
Michael Black W9MDB cf858bfa3c Change rig.c to return RIG_ENAVAIL instead of RIG_ENTARGET when set_vfo==NULL 
Add IC706* to rigs that don't do dsp settings
Remove dynamic detection of transceive status in icom/frame.c
https://github.com/Hamlib/Hamlib/issues/490
 2021-01-08 12:04:25 -06:00
Michael Black W9MDB 19e819948f Add RIG_TARGETABLE_ANT and fix Yaesu rigs -- Yaesu are only ones needing this right now 
https://github.com/Hamlib/Hamlib/pull/495
 2021-01-08 07:16:45 -06:00
Michael Black W9MDB 5fdf5f0e63 Fix freq_new error 
https://github.com/Hamlib/Hamlib/issues/485
 2021-01-02 16:32:16 -06:00
Michael Black W9MDB 92c6d98e8e Fix set_freq to not call get_freq if get_freq is not available 
Correct cache setting for set_freq
https://github.com/Hamlib/Hamlib/issues/485
 2021-01-02 15:22:01 -06:00
Michael Black W9MDB dbb06f9e7b Add debug to show vfos in vfo_list 
https://github.com/Hamlib/Hamlib/issues/482
 2020-12-29 16:15:54 -06:00
Michael Black W9MDB f484c4fdc8 Update copyright 2020-12-29 09:09:14 -06:00
Michael Black W9MDB 18e9d56b47 Add some debug for set_mode stuff 2020-12-22 17:01:06 -06:00
Michael Black W9MDB 3211e3aea1 astyle files 2020-12-21 23:50:29 -06:00
Michael Black W9MDB 2b1bce89bf Fix icom default filter settings 
https://github.com/Hamlib/Hamlib/issues/471
 2020-12-19 14:30:31 -06:00
Michael Black W9MDB 1e1f7529fa Fix debug statements in rig.c 2020-12-13 10:20:02 -06:00
Michael Black W9MDB 8c265a85f2 Fix debug statement in rig.c 2020-12-13 10:00:37 -06:00
Michael Black W9MDB 74356b3a99 Add RIG_TARGETABLE_PTT and RIG_TARGETABLE_RITXIT 
For most rigs these are non-vfo specific commands so we can avoid doing VFO switching
Add flags to all Yaesu, Icom, and Kenwood in rig_open
Some rigs do have VFO specific but it's already in the backend
More rigs can use these flags..TBD...
https://github.com/Hamlib/Hamlib/issues/430
 2020-10-31 17:19:08 -05:00
Michael Black W9MDB 3ffbeae881 clean up cppcheck warnings 2020-10-25 16:30:09 -05:00
Michael Black W9MDB 4e748df12b Add -x/--uplink switch for GPredict. Will avoid reading freq from the uplink VFO 1=Sub, 2=Main 
This will likely deprecate the twiddle option
https://github.com/Hamlib/Hamlib/issues/404
 2020-10-23 11:34:42 -05:00
Michael Black W9MDB 8a769c7011 Add VFO_CURR to set_cache_freq and get_cache_freq 
https://github.com/Hamlib/Hamlib/issues/300
 2020-10-19 22:22:59 -05:00
Michael Black W9MDB bafd6e97f4 Add a 200ms to wait_morse to allow previous CW request to assert PTT 
https://github.com/Hamlib/Hamlib/issues/422
 2020-10-19 12:28:13 -05:00
Michael Black W9MDB a8961426b0 Invalidate the cache so get_ptt is current 
https://github.com/Hamlib/Hamlib/issues/422
 2020-10-19 12:03:38 -05:00
Michael Black W9MDB 7e8bfc8b49 https://github.com/Hamlib/Hamlib/issues/422 2020-10-19 11:50:02 -05:00
Michael Black W9MDB 0443afc794 Add wait_morse command with generit wait_morse_ptt function 
This should work for any send_morse with full breakin
https://github.com/Hamlib/Hamlib/issues/422
 2020-10-18 12:34:36 -05:00
Michael Black W9MDB e1b3bcff9e New caching non-interfering side-by-side with old until 4.1 development underway 
https://github.com/Hamlib/Hamlib/issues/280
 2020-10-17 23:55:22 -05:00
Michael Black W9MDB 5add4b343d Add rig_stop_morse to API and stop_morse command for rigctl 
No rigs implemented yet
https://github.com/Hamlib/Hamlib/issues/240
 2020-10-16 08:41:57 -05:00
Michael Black W9MDB 4faad82da7 Change get_ptt RTS/DTR to keep serial port open 
New option --set-conf=ptt_share=1 to revert to old behavior where serial port is opened/closed every get_ptt
https://github.com/Hamlib/Hamlib/issues/383
 2020-10-12 23:27:13 -05:00
Michael Black W9MDB 34e9327446 Don't expire cache if we just read the freq 2020-10-11 23:40:29 -05:00
Michael Black W9MDB 6d51f65528 astyle files 2020-10-06 23:14:27 -05:00
Michael Black W9MDB fca4cc7903 Lots of changes to get Main/Sub recognized across rigctl/rigctld boundary 
Needs lots of testing
https://github.com/Hamlib/Hamlib/issues/395
 2020-10-06 21:50:37 +01:00
Michael Black W9MDB d18196f685 Lower log level of debug statement 2020-09-04 17:42:11 -05:00
Daniele Forsi d7b332c3f7 Fix spelling errors 
Fixed using the following command:
codespell --write-changes --summary --skip=*.m4 --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
codespell --write-changes --summary --skip=aclocal.m4,lib --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"

Codespell home page: https://github.com/codespell-project/codespell
 2020-07-24 09:02:48 +02:00
c vw d0bff25bb9 Corrections 2020-07-17 12:22:21 +02:00
Bill Somerville 3f40029720
Add missing config parameters for rig power on/off and screen-saver 
Defaults set to by compatible with prior released versions to avoid
regressive behaviour.
 2020-07-04 19:42:37 +01:00
Michael Black W9MDB 699927b3e7 Add additional get_freq if freq > 100MHz to update cache 
This covers rigs that round VHF/UHF freqs to different intervals
https://github.com/Hamlib/Hamlib/issues/334
 2020-07-04 11:20:38 -05:00
Michael Black W9MDB e31500842c Ensure cache invalidated before re-reading freq in set_freq 2020-07-02 15:54:26 -05:00
Michael Black W9MDB 1ad029bfb3 astyle rig.c 2020-07-02 11:18:33 -05:00
Michael Black W9MDB 4cb0f2917e Fix rig_debug in rig.c 2020-07-02 11:15:27 -05:00
Michael Black W9MDB 613b7a6830 Add get_freq to set_freq for confirmation if < 100Hz interval 
Should correct incorrect cache reporting and doppler issues
https://github.com/Hamlib/Hamlib/issues/334
 2020-07-02 09:40:48 -05:00
Michael Black W9MDB d42d837162 Normalize cache namespaces to hamlib_ and HAMLIB_ 2020-07-01 22:33:32 -05:00
Michael Black W9MDB a789cb06bb Remove unnecessary debug 2020-06-27 23:21:39 -05:00
Michael Black W9MDB 720c123be0 Add some debug to rig.c 2020-06-25 05:54:06 -05:00
Michael Black W9MDB 4ff31d008f Fix rigctl -o with rigctld 
https://github.com/Hamlib/Hamlib/issues/287
 2020-06-22 23:16:02 -05:00
Michael Black W9MDB a3c4eb9ee0 Fix cppcheck warnings 2020-06-21 22:31:31 -05:00
Michael Black W9MDB e092a4a0a4 rigctld -T ::1 now works with rigctl -r ::1 
More IPV6 testing needed on Windows and MacOS
Still not binding to link local addresses to be addressed next
https://github.com/Hamlib/Hamlib/issues/29
 2020-06-21 17:47:04 -05:00
Michael Black W9MDB 379caace7c update comm_state when port_close is called 2020-06-21 16:15:00 -05:00
Michael Black W9MDB 3b3c2abb00 On a 2nd rig_open call it would fail since port was still open. 
We now force close the port during rig_open.
This should prevent the invalid configuration error WSJT-X sees on rig_open
 2020-06-19 23:26:59 -05:00
Michael Black W9MDB b0a956df81 Clean up compile/cppcheck warnings 2020-06-14 10:35:44 -05:00
Michael Black W9MDB ad08ee02e1 Fix get_split behavior in rig.c 
This needs a lot of testing on different rigs
https://github.com/Hamlib/Hamlib/issues/303
 2020-06-14 17:29:18 +02:00
Michael Black W9MDB f323a54b5a Fix cppcheck warnings and compile error 2020-06-13 16:31:25 -05:00
Michael Black W9MDB c5388b9f37 In icom.c remove priv->curr_vfo and change to rig->state.current_vfo 
https://github.com/Hamlib/Hamlib/issues/299
 2020-06-13 15:53:37 -05:00
Michael Black W9MDB 31fdc8cc0c Add some debug to rig.c 2020-06-13 12:54:33 -05:00
Michael Black W9MDB 2611cad188 Fix spelling error in rig.c 2020-06-13 07:36:31 -05:00
Michael Black W9MDB a11cddfd24 Clean up network_open pathname logic 
https://github.com/Hamlib/Hamlib/issues/298
 2020-06-13 06:57:27 -05:00
Michael Black W9MDB e54bc7e860 Change variable name for clarity 2020-06-12 22:51:16 -05:00
Michael Black W9MDB de20cadc85 Allow localhost, hostnames, and IPV6 addresses to enable NETWORK rig type 
network_open still does not recognize valid IPV6 addresses yet
https://github.com/Hamlib/Hamlib/pull/290
 2020-06-12 17:40:10 -05:00
Michael Black W9MDB b15c73d2d2 Fix segmentation fault/endless loop for Icom rigs 2020-06-12 16:34:48 -05:00
Michael Black W9MDB 1317bb8034 Fix vfo_fixup link error 
Make vfo_fixup a HAMLIB function so it can be used elsewhere
https://github.com/Hamlib/Hamlib/issues/299
 2020-06-12 08:28:05 -05:00
Michael Black W9MDB ef451705b8 Clean up redundant code in rig.c 2020-06-11 22:29:00 -05:00
Michael Black W9MDB f71c12da94 astyle files 2020-06-09 22:37:03 -05:00
Michael Black W9MDB ee6703107f Fix 'f VFOB' staying on VFOB instead of reverting to VFOA when VFOA is current VFO 2020-06-07 23:31:20 -05:00
Michael Black W9MDB 1cbdc5a7ea Fix incorrect setting of VFOA when VFOB requested using vfo_opt mode 
Only affected rigs that were not (caps->targetable_vfo & RIG_TARGETABLE_FREQ) like the dummy rig
https://github.com/Hamlib/Hamlib/issues/284
 2020-06-06 16:03:16 -05:00
Michael Black W9MDB 2a05008bd4 Add vfo_fixup to rig_get_split_freq 2020-06-04 10:27:00 -05:00
Michael Black W9MDB 4502769c8d Add FT-DX101D as a rig that can't get VFOA freq while VFOB is transmitting 
Move the IC910 of the same problem to rig.c instead of icom.c
Eventually this may become a backend flag
https://github.com/Hamlib/Hamlib/issues/279
 2020-06-03 18:12:17 -05:00
Michael Black W9MDB 847b73cdb1 Merge branch 'master' of https://github.com/mdblack98/Hamlib 2020-06-03 11:35:16 -05:00
Michael Black W9MDB 52c3b1d3c9 Rigs with no set_vfo and asking for currVFO will have vfo changed to something sensible 
https://github.com/Hamlib/Hamlib/issues/278
 2020-06-03 11:27:45 -05:00